Guitarists who wish to control the channel and effects of their Catalyst amplifier will be happy with the Line 6 LFS2, a roadworthy metal latching footswitch that provides remote control of channel and effect on/off status. The effect switch may be reassigned via the Catalyst Edit app. A 10' right-angle/straight 1/4" TRS cable is included.

For Catalyst 60, 100, 200 Amplifiers    Roadworthy Metal Latching Footswitch    Remote Control of Channel and Effect    LEDs for On/Off Status    Reassign via Catalyst Edit App    Includes 10' 1/4" TRS Connection Cable

Related Questions and Answers

Q: 1. Reviews mentions that the power adapter is for UK plugs and that a converter is necessary. Is that true?

A: No. The external power supply included with the BOSS RC-505MK2 Loop Station that we sell is intended for use in North America.

Q: 2. Will these accept a regular line level signal out of a console?

A: Yes, the Mini Body Pack In-Ear Monitor System is intended for use with line level signal and can accept line level signal from the output of a mixing console.

Q: 3. Does this Fisher 960-00171 charger have a discharge mode where it fully discharges the battery to refresh it? Thanks

A: The Fischer Amps 960-00171 does not make any mention of a discharge feature.

Q: 4. I have a TRAM TR-50 lav mic that is made to use with the Senn EW100 G3 system. I have teh Senn ME2 as well that came with the G3 kit. I would like to be able to use both the TR-50 and the ME2 wired to my SD-302. Since the TR-50 is wired to work with the G3 I assume this would work to use it wired (in lieu of the TRAM TR 79+ unit for the same purpose). Can anyone who as ACTUALLY done this confirm that it will work? I too assume it will, but would like to hear from someone who has actually done it if at all possible. Thanks!

A: I know it doesnt work with my Countryman B3. I think it is tuned for the ME2. It clips and distorts with my Countryman. It is possible if the TRAM is similar sensitivity as ME2.

Q: 5. DP24sd/32sd.. with RC-3F one of the buttons can be set for 'Record' and one for 'Play'. Can 'Record' start recording alone or does 'Play need to be pressed also at the same time?

A: As long as you have a track armed it works. You have the options to set any of the three foot switches to any combination of the following settings.Play, Rec, Stop, FF, Rew, Punch In/Out, PlayStop and cue locate.

Q: 6. Would this work with the Portastudio 488?

A: No, this is a special jack that only fits newer recorders, like the DP-32SD or DR-40.

Q: 7. I have a MKE 2 EW Gold microphone I would like to convert to XLR. Description says this device works however specs says that it deliver 1.6V of phantom power. The MKE 2 EW Gold requires 7.5 V of power. Does this actually work?

A: This adapter will convert a 3.5mm mic with plug-in power, such as the Sennheiser MKE2 to XLR, and allow it to work with 48 V phantom power.

Q: 8. do you have to have a mixer to use this?

A: No. I use it to go from stereo 1/8 sources (like laptops and cell phones) to one or two XLR's that I then put into a mixer, personally. But you could plug your XLR's into a combo amp or whatever else you want.

Q: 9. Will this work on the GT2 guitar trainer?

A: No, the unit was designed to be used with the RC-30P footswitch.Since the TASCAM RC-30P is no longer manufactured (with no replacement), any momentary closure, NO (normally open) foot-switch using a 1/4 phono plug can be used.Examples: * BOSS FS-5U* M-AUDIO SP-1Thank you for your interest in TASCAM products.

Q: 10. Can this be used on passive and powered monitor systems?

A: Neither. You would connect this to a return on a stage box, either an aux return, or if you have an extra monitor return.