The AJA V2Analog HD/SD-SDI to Analog Converterfrom AJA V2Analog HD/SD-SDI to Analog Converterprovides SDI digital to component/composite analog conversion at either HD or SD resolutions. It is ideal for integrating analog equipment such as monitors and tape decks into digital workflows. It utilizes a full 10-bit data path to ensure a high-quality conversion. Its low power consumption and compact size, makes it suitable for use on set or in AV installations integrating different signal types.

The V2Analog supports NTSC, PAL, 720p at 50/59.94/60 Hz, 1080i at 50/59.94/60 Hz, and 1080psf at 23.98/24/25 Hz. The converter accepts incoming digital SDI signals and converts them to analog YPbPr (SMPTE, EBU-N10), Betacam, or RGB component outputs, and NTSC/PAL or S-Video composite outputs. It is important to note that the V2Analog does not up-convert or down-convert between SD and HD resolution. Only digital to analog signal conversion is performed, therefore an HD-SDI signal will be output as an HD analog signal and won't be compatible with devices that only accept SD analog signals.

Configuration can be set on the unit itself using the DIP switches, or remotely with AJA's free MiniConfig software for Mac or PC over a USB 2.0 connection. The software provides an easy-to-use graphical interface with detailed information about input and output formats as well as all configuration parameters. A universal 5 VDC power supply comes included.

AJA V2Analog HD/SD-SDI to Analog ConverterV2Analog does NOT up-convert or down-convert between SD and HD resolutions. Only digital to analog signal conversion is supported.

10-bit Digital to Analog Conversion    HD/SD-SDI Input    YPbPr/RGB Component or Composite Output    YPbPr, Betacam, or RGB Component Formats    NTSC or PAL Composite Formats    Full 10-Bit Data Path    Control via MiniConfig Software over USB    External DIP Switch Configuration    Low Power, Compact Size    Universal 5 VDC Power Supply Included

Related Questions and Answers

Q: 1. Does this converter take a 4k input and output that 4k signal to 4 different hd signals (ie top left, bottom left, top right, bottom right)?

A: The AJA HA5-4K 4K HDMI to 4K SDI Mini-Converter does not support split-screening.

Q: 2. Does this unit include the power supply?

A: Yes, this includes the AJA DWP-U-R1 Worldwide Power Supply for AJA Mini-Converters B&H # AJDWPUR1.

Q: 3. will this unit upgrade the analog signal to 720 or 1080 sdi?

A: cannot change the resolution, 720 to 720 or 1080 to 1080

Q: 4. Do you need HDMI 2.0 to be able to do 3840x2160 at 60 fps or this converter with HDMI 1.4 can do 3840x2160 at 60 fps ? I thought HDMI 1.4 maximum frame rate at 3840x2160 resolution was 30 fps.

A: You would need HDMI 2.0 for UHD at 60 fps, which this converter does support as well. So if you have a device that outputs HDMI 2.0, it will work with this converter.

Q: 5. So I still have a question about quad link 3G-SDI.So if I need to receive the UHD signal (3840 x 2160) from HDMI output of my camera Sony a7SII to SDI I need to use four 3G-SDI cables (quad link 3G-SDI) but how I can input all four 3G-SDI cables into Convergent Design Odyssey 7Q+ (it's saying in specs that this recorder supports Single Link, Dual Link, Quad Link) if it has only 2 SDI inputs, can anyone explain me how quad link 3G-SDI is working?And what exact SDI cables I need to buy? Thank you?

A: The HA5-4K has a single HDMI 1.4 input, it does not have any SDI Inputs. Also, the 7Q+ can record 4K directly from HDMI. You would not need a converter to use the A7SII with the 7Q+.

Q: 6. I have 2 questions.Can this device AJA HA5-4K 4K HDMI to 4K SDI Mini-Converter - be powered on from the V-Mount battery with a P-Tap cable - that do P-Tap to Barrel power and what is the size of barrel 2,1 mm or 2,5mm?And the Second question is can I use this device with a Sony a7SII that do output thru Micro HDMI to HDMI cable (I am using that cable Atomos AtomFLEX HDMI (Type-A) Male to Micro-HDMI (Type-D) Male Coiled Cable B&H # ATOM4K60C2 ) that goes into HDMI input of this device and than from this device I need to use 2 6G-SDI cables that goes into Odyssey 7Q+ recorder that now supports 6G-SDI inputs (that was saying on the B&H site SDI inputs now support 6G-SDI in addition to 3G-SDI.) so I use two 6G-SDI cables that are coming out from the device to Odyssey recorder is that correct? So I can have 4K input and recording up to 60fps 4K?Am I right or I can't make it happen?

A: There is a P-Tap cable for this product, it is B&H # COXPAJA5. However the Sony A7SII only outputs UHD 4K at 30fps. This product will not change that, nor are we aware of any product that will allow you to get 60fps out of the A7SII.

Q: 7. My SDI input is 1080p 29.97. Will this output S-Video?

A: No, it does not. use this one. Blackmagic Design Mini Converter SDI to Analog B&H # BLSDIAMC.

Q: 8. Can this be used between a Sony A7R2 (4K HDMI) and the older model Convergent Design 7Q (dual 3G-SDI)?

A: Yes, this can be used. Make sure it can accept Quadlink 4K.

Q: 9. Will this convert S-Video?

A: Yes, this product can be used with to convert Component, Composite or S-Video.

Q: 10. I have a video switcher with Program out via SDI, I am told there is embedded audio running out with the SDI video signal. Will this unit work for my application? I want my SDI PRGM output from my switcher to feed into a standard LCD TV monitor via HDMI with video and sound. I want to set up client monitors in the Greenroom down the hall .. All my SDI feed does for my consumer HDMI TV is video only...Thanks

A: Hi James, This is Jules from Symbiosis, Decimator's Master Distributor for your territory. The Decimator 2 will all you to pass both video and embedded audio from the SDI input to the HDMI output for monitoring on your LCD TV. Just in case you need it, there is also a pair of analog line level outputs for driving an amplifier or set of active speakers as well. I hope this helps. Jules