Control compatible video lights via DMX with this 20" GVM DMX 3-Pin XLR Y-Cable 20 Inchfrom GVM DMX 3-Pin XLR Y-Cable 20 Inchand its breakout Y-shaped design. A 5-pin aviation connector inserts into your light and splits into a male and female 3-pin XLR connector. The cable has a 110-ohm impedance optimized for transmitting digital data. Durability and flexibility are maintained thanks to the cable's PVC jacket.

DMX Breakout Y-Cable    For GVM Lights    Male/Female 3-Pin XLR DMX Connectors    5-Pin Aviation Connector

GVM SD200D

GVM SD200S

GVM SD300D

GVM SD300S

GVM SD200R

Related Questions and Answers

Q: 1. Currently Have a Sony ECM-MS957 - Stereo Condenser Microphone with the 5 pin XLR Female outWill this Rode cable isolate 2 mono channels into the male XLRs?

A: Hi Robert, I use this cable with my AT BP4029 stereo microphone and plug the 2 male xlr into my zoom recorder. Each male XLR connector have the signal of each channel. My mic is also MS, so connector 1 carries the Mid, and connector 2 carries the Side channels. I hope this help you

Q: 2. Is this what I need to connect my Azden SGM 1X condenser mic to my sony HDR-CX900 camera 3.5 mm mic input?

A: This is a specialty cable designed for a 5 pin stereo XLR connection. Use this: Kopul LMT100 - Low to High Impedance Matching Transformer (1.5') B&H # KOLMT100

Q: 3. Hollyland Mars 400pro / atomos ninja v5 monitor will this work i hear if used cheap dtap cable it will fry hdmi port on bmpcc 4k

A: This is for Andycine Monitors. We are not aware of how it would work with other brands and is not recommended.

Q: 4. Will this work with this schoeps cable? https://www.bhphotovideo.com/c/product/1513008-REG/schoeps_ak_2l_su_adapter_cable_2_lemo_to.html ?

A: Yes, this Rode NT4-DXLR Stereo 5-Pin XLR to Dual 3-Pin XLR Cable for NT-4 Fixed X/Y Condenser Microphone (10.3'), would work with the Schoeps Adapter Cable: 2-Lemo To XLR-5M for CCM_L Pair you have asked about.

Q: 5. How long is this?

A: The length of the Matthews 5/8" Baby Pin with 1/4"-20 Male Screw is just below 4 inches.

Q: 6. Can I use a SM58 into my DSLR with this?

A: Yes as long as your camera has a 3.5mm mic input.

Q: 7. What brand are the connectors on this cable? I have a cable that comes from Rode for my nt4 and it has black, no-name connectors, that seem to want to pull apart when you remove it from the mic. Concerning.

A: Rode has not specified a brand name for the XLR connectors. For another cable option with 5-pin XLR female to two 3-pin XLR male, you may want to consider the Remote Audio 5-Pin Stereo XLR Female to Dual XLR Male Y-Cable (B&H #RECAXSTE25) which is 25' long and uses Neutrik connectors with Mogami cable. The same Remote Audio cable is also available in 18" length (B&H #RECAXSTE). We also have the Sony 5-Pin to Dual 3-pin XLR Cable for ECM-680S (B&H #SO5P3PXSGC) which is 16" long and shows Neutrik connectors in the photo.

Q: 8. is this compatible with the D5200?

A: Yes, CamRanger 1023 Angled 8-Pin USB Cable for Nikon (40") BH #CA1023 is compatible with the Nikon D5200.

Q: 9. Is this compatible with the Audio-Technica BP4025 stereo mic?

A: Thank you for your question. This cable will function perfectly with the 5-pin output of the BP4025 and to split the stereo signal to separate left and right xlr.

Q: 10. Is it possible to use this for DMX 5-Pin transmission to fixtures that have TRRS connections?

A: The Senal SMH-H5X2 2.5mm TRRS to 5-Pin XLR Male Cable for Communication Headsets does not have the correct wiring to be used with DMX fixtures; it is for use with audio devices only.