Capture professional HD video for your video conferencing, education, house of worship, or other video application with this black HDMI/NDI HX PTZ Camera with PoE, 20x Zoom, Blackfrom AViPAS. The remotely controllable PTZ camera allows you to capture up to 1080p60 resolution and features HDMI and IP outputs, and it fits right into an NDI network with its built-in NDI|HX streaming support. It also supports up to 1080p30 with dual IP streams via its RJ45 interface. Featuring 20x optical zoom, it provides a 3.23 to 60° adjustable angle of view, a ±170° panning range, a ±90° tilting range, auto or manual focus, wide dynamic range, and serial control support.

The low-noise 1/2.8" CMOS sensor ensures a high signal-to-noise ratio while advanced 2D/3D noise-reduction technology further reduces image noise, so that an even sharper image is delivered in low light. The RJ45 Ethernet port allows you to control and configure the camera via IP, and it also allows simultaneous dual streaming via IP for a live Internet stream. There is also a 3.5mm audio line input on the back to input stereo audio into your streams and video output.

The pan/tilt/zoom mechanism uses quiet, smooth movements, controllable using the included IR remote controller, ONVIF, and VISCA-over-IP control, or by using the RS-232 input/outputs that support VISCA, Pelco-D, and Pelco-P protocols for use with a separately available controller. You can store up to 128 presets using an optional serial controller, or store 10 presets when using the included IR remote. You can power the camera using a networked PoE+ (Power-over-Ethernet) switch, or by using the included power adapter.

1080p60 Output over HDMI & IP / NDI|HX    Up to 1080p30 IP H.265/264 Streaming    20x Optical Zoom, Manual or Auto Focus    3.23 to 60° Angle of View    Dual IP Stream Output, 128 Presets    2D/3D Digital Noise Reduction    IP & Serial Control via VISCA, Pelco-P/D    PoE+ Support, 3.5mm Audio Line Input

Up to 1080p60 output over HDMI and NDI|HX outputs

Up to 1080p30 IP streaming; simultaneous dual-stream support

20x optical zoom

±170° panning, ±90° tilting

Fast, accurate, and stable autofocus technology; manual focus also supported

Low-noise 2.1MP CMOS sensor ensures high signal-to-noise ratio

2D/3D noise reduction technology further reduces noise while ensuring image sharpness

Quiet PTZ mechanism

H.265/H.264 compression

3.5mm line stereo audio input with support for AAC and LPCM encoding

ONVIF and VISCA-over-IP control and RTMP/RTSP streaming protocol support with easy linking to common streaming media servers

VISCA, Pelco-D, and Pelco-P communication protocols via RS-232 serial interfaces

PoE+ (Power-over-Ethernet) IEEE 802.3af support

Low-power sleep function

128 serial presets, 10 via IR remote

Wide dynamic range

White Balance: auto, manual, one push

Related Questions and Answers

Q: 1. Is there a compatible iPhone controller app for this camera?

A: All JVC PTZs, like the JVC KY-PZ200 HD PTZ Remote Camera with 20x Optical Zoom, have a GUI through an IP address that is accessible via an internet connection with PCs or iOS devices. The GUI allows basic control of the camera along with other features including a live video window. However, operation could be slow and unstable, so you would have to test it to see if this control method meets your requirements. Most customers would invest in a JVC camera controller for smooth, reliable camera control such as the JVC RM-LP100 Remote PTZ Camera Controller over IP (B&H # JVRMLP100) or the JVC RM-LP5G Compact Joystick PTZ Controller (B&H # JVRMLP5G).

Q: 2. "RS-232, VISCA over IP Control" - what about NDI? Can the PTZ be set over NDI?

A: The video can be sent via NDI but the control protocols are RS-232 & VISCA

Q: 3. I can use with 1 single sdi cable the video, power and control?

A: Unfortunately, SDI output does not support power delivery. However, the FeelWorld SDI/HDMI PoE PTZ Camera with 20x Optical Zoom has POE power support, and NDI. You could power and send out low latency NDI video using Cat6a cable. You could also decode the NDI output back out to SDI if required. Decoder NDI to SDI https://bhpho.to/3zrX8D2 POE Power injector https://bhpho.to/42YwnUo

Q: 4. can this camera be controlled by iOS app "PanTiltZoom" by ptzOptics? the app uses VISCA Over IP

A: The PanTiltZoom iOS app is only intended for use of PTZOptics cameras, as per the manufacturer. We do not recommend using this app with the JVC KY-PZ200 HD PTZ Remote Camera with 20x Optical Zoom.

Q: 5. Does it have manual focus?

A: Yes, the default is auto but you can change it to manual.

Q: 6. HX License Included?

A: Yes, the NDI|HX license is included with the JVC KY-PZ200N HD NDI|HX PTZ Remote Camera with 20x Optical Zoom (Black).

Q: 7. Can this camera mirror or flip? Can it flip the image if mounted upside down??

A: In the OSD Menu Setting, select IMAGE, then MIRROR to make the image flip on the vertical plane.

Q: 8. Can this camera be run using OBS or other streaming program?

A: Yes. The plugin supports the VISCA serial, VISCA-over-IP, and Pelco protocols but OBS 26.0.0 needs to be in place for it to work.

Q: 9. Which physical joystick controller is suitable for this camera?

A: We recommend using the Lumens VS-K20 and Marshall Electronics VS-PTC-200. This AIDA PTZ camera has an 8-Pin Mini-DIN (RS-232, VISCA) output. https://www.bhphotovideo.com/c/product/1156251-REG/lumens_vs_k20_compact_camera_controller.html https://www.bhphotovideo.com/c/product/1216267-REG/marshall_electronics_vs_ptc_200_compact_ptz_camera.html

Q: 10. What are mounting options? Tripod? Other?

A: This PTZ camera can be mounted on a tripod. You can also get the AViPAS Wall Mount for AV-2000 separately.