Vanco 100W Single-Channel Amplifier 70/100V

Vanco 100w Single-channel Amplifier 70/100v

Product Code: eq118978
Availability: In Stock

$2,021.85 $3,133.87

Qty

10 reviews Write a review

Description
Reviews (10)

The 100W Single-Channel Amplifier from Vanco is a 100W Class-D mono output amplifier that is switchable between 70 and 100V. It features a 3.5mm stereo input port, stereo RCA audio inputs, and a 3-pin block microphone input that supports condenser, dynamic, and wireless microphones. A TOSLINK port provides the unit's sole digital audio input.

Encased in a compact, antistatic case, the amp has a front panel that offers manual volume control with an LED level indicator as well as a selector button for three inputs and one for mic, line, bass, and treble, with respective LED indicators. Bass and treble, along with most other functions, are controllable via the front panel, RS-232, or IR using a separately available remote control. A 24 VDC, 5A power adapter is included.

100W Mono Audio Output Switchable Between 70 and 100V Condenser/Dynamic/Wireless Mic Support Manual Volume Control Convection Cooling System LED Indicators for Power & Status Antistatic Case Design

Key Specs
Number of Channels	1
Amplifier Power Rating	100 W
Load Impedance / Voltage	70 / 100 V
DSP	Yes
Analog Audio I/O	1x 2RCA Coaxial Female Line Input 1x Block 3-Pin Balanced/Unbalanced Mic Input 1x 1/8" / 3.5 mm TRS Female Line Input 1x Block 3-Pin Output
Digital I/O	1x TOSLINK S/PDIF Input
Network I/O	No
Amplifier
Number of Channels	1
Amplifier Power Rating	100 W
Amplifier Class	Class-D
Load Impedance / Voltage	70 / 100 V
Performance
Frequency Response	20 Hz to 20 kHz
Input Impedance	10 Kilohms
Max Gain	37.8 dB (at 70 V, at 100 V)
SNR	69.2 dB
THD+N	1% (@1kHz, 0.3%@20kHz at Nominal)
Common Mode Rejection Ratio (CMRR)	70 dB
Signal Processing
DSP	Yes
EQ	2-Band: Treble: Bass:
Ducking/Muting	Yes
Connectivity
Analog Audio I/O	1x 2RCA Coaxial Female Line Input 1x Block 3-Pin Balanced/Unbalanced Mic Input 1x 1/8" / 3.5 mm TRS Female Line Input 1x Block 3-Pin Output
Digital I/O	1x TOSLINK S/PDIF Input
Network I/O	No
USB I/O	No
Mobile App Compatible	No
Wireless	No
Power
AC Input Power	Not Specified by Manufacturer
Current Consumption	5 A
Power Consumption	5 W (Standby)
Physical
Display & Indicators	Front Panel: 3x Green LED (Input) 4x Green LED (Signal) 10x LED (Level)
Cooling	Convection
Operating Conditions	22 to 72°F / -10 to 40°C at 10 to 90% Humidity
Dimensions	5.1 x 5.9 x 2.5" / 13.0 x 15.0 x 6.3 cm
Weight	3.1 lb / 1.4 kg

Switchable between 70 and 100V
Sixteen ID codes for controlling multiple PAV1100 amplifiers in a system
Three-level mic input, supports condenser, dynamic, and wireless microphones with ducking or mixing function
48V phantom power for condenser microphones
Mic input supports balanced/unbalanced signal and suppresses external noise effectively
One two-channel analog audio input and one digital audio input, switchable by button, IR remote, or RS-232
Manual volume control
Bass/Treble controllable via front panel, IR remote, or RS-232
Convection cooled, no external fan needed
LED indicator for power and working status
Antistatic case design provides good protection for long-term and stable performance

Related Questions and Answers

Q: 1. Is the RCA line out a preamp line out for a line in on a second power amp for a second set of speakers?

A: The Onkyo A-9110 2-Channel 100W Integrated Amplifier (BH # ONA9110) features a Line Out set of RCA jacks that will drive a pair of self-amplified/active speakers or for sending a line level signal to al line level device like an amplifier, or mixer.

Q: 2. Can you supply this with power input of 240VAC 50Hz?

A: At this time we only carry the 120v version. You could use a step down transformer with it, such as BH #SEST1500UD.

Q: 3. Can you use a pair of 4 ohm speakers with this amp?

A: The Audiolab 6000A Stereo 100W Integrated Amplifier (Silver), B&H # AU6000AS, can be used with 4 ohm speakers. The amplifier will provide 75W per channel at 4 ohms.

Q: 4. Does this amplifier include the phoenix connectors for the inputs?

A: The Electro-Voice PA2250T ships with phoenix screw lock connectors for all inputs and outputs.

Q: 5. The description says "stereo/mono operation". Is this really true; if so how?

A: The Rolls RA62C has a stereo/mono button next to the "Main Input" knob on the front of the unit.

Q: 6. Does this unit work with both 110 volts and 220 volts?

A: Yes, this Audiolab 6000A Stereo 100W Integrated Amplifier works at 100 to 240 VAC, 50 / 60 Hz - allowing it to work with power in any region.

Q: 7. Any scratches or dings? Any issues?

A: The Audiolab Omnia Stereo 100W Network Amplifier and CD Player is shipped brand new and sealed from Audiolab. It does not come with scratches, dings or issues.

Q: 8. Will this Rolls RA53B shipped with 220V power adaptor?

A: The 12 VDC Power Supply included is designed to accept 120 VAC only.

Q: 9. Shall we equalize the sounds with low, medium and high frequencies?

A: The Audiolab 6000A does not have EQ controls.

Q: 10. DOES THIS AFFECT THE SOUND OF THE PRE AMP?

A: No the Onkyo M-5010 does not affect the sound of your pre-amp.

David	26/09/2024
[5 A ] I use this amplifier in bridge mono to feed a 70-volt transformer for distributed P.A. horn/drivers. It seems to have plenty of headroom and provides clean audio with no distortion when used within its rated specs. Solid and well-built. 5

Camilo	19/09/2024
[100 W ] The ART SLA-1 amp is built like a tank in a slim form format. Even though it has a cooling fan in the back I've never hear the fan at all (or my room is cool enough it doesn't kick-in). My two passive studio monitors are loud and clear! 5

John	03/09/2024
[69.2 dB] EXCELLENT AMP, PERFECT FOR MY KLIPSCH BOOK SHELF SPEAKERS AND 100W SUBWOOFER. YOU CAN CAN CONTROL THE BASS AND TREBLE FOR GREAT FULL SOUND. I PLAY MY RECORDS WITH A TEAC TT AND CD'S WITH A CAMBRIDGE THAT HAS ITS OWN DAC. VERY SATISFIED WITH THIS AMP! 5

Chief	09/07/2024
[100 W ] I have had one on for about 10 years 24 Hr / day and it went into protect on one channel. Very small fits in rack so I bought another. I hope it lasts another 10 years 5

Joseph	01/07/2024
[100 W ] This is my second SLA-1. My first one is over 20 years old now. I simply needed a second one. Love the 1U rack mount. I also like that is a totally linear amplifier . 5

Jarod	24/05/2024
[70 / 100 V ] Purchased for the dual input mixing feature. Auto standby is also great. 5

Chris	22/04/2024
[69.2 dB] I’m using this amplifier to drive a pair of 8 ohm Polk RT10’s. Don’t let the modest power specifications fool you. This amplifier drives these speakers with deep, tight and controlled bass and detailed highs. There’s plenty of volume with the high current transformer. Very happy with this purchase! 5

Dave	07/04/2024
[70 / 100 V ] This amplifier was simple to connect and it works exactly as they said it would. 5

tcio	05/04/2024
[1] I've owned this power amp for about 4 years now. I use it for guitar though. I run a small tube amp into a dummy load then into a tube EQ and FX unit and into this amp. I can get the best sounds I have ever had at any volume as the tube amp is cranked up all the time. I'm not sure if the other user has a defective unit or not but I have never even noticed the fan even when I am home alone in my living room and turn the thing on. I've tried a couple of other power amps and this one seemed to have the best clarity and sound but again I am using it for guitar but I will add that I am an extremely picky tone fanatic! 5

Gavin	30/11/-0001
[100 W ] Few weeks of listening time now and quite impressed. Smooth, solid and detailed sound. Not bright with Fyne f303 and SVS pb1000. Pleasure to listen to and plenty of power. 5