This Aputure LS1200 Reflector Kitis the same one that's included with the Aputure LS 1200d Pro LED light. It's also compatible with the LS 600c Pro, which has a similar chipset. The kit includes three Bowens mount hyper reflectors with narrow, medium, and wide beam angles. They provide a natural falloff similar to traditional lighting fixtures and increase the brightness of the large-chip lights. When compared to the LS 600 series hyper reflector commonly used with the LS 600c Pro light, this reflector kit allows you to achieve increased intensity and different beam angles.

Open Box Products Have a Limited 1-Year Manufacturer Warranty    Three Bowens Mount Hyper Reflectors    For LS 1200d Pro & LS 600c Pro Lights    Narrow, Medium, and Wide Beam Angles    Increases Brightness    Carry Case Included

• Narrow reflector: 83,100 lux at 9.8'
• Medium reflector: 22,400 lux at 9.8'
• Wide reflector: 13,010 lux at 9.8'

• Narrow reflector: 17,480+ lux at 9.8'
• Medium reflector: 5,300+ lux at 9.8'
• Wide reflector: 2,694+ lux at 9.8'

Related Questions and Answers

Q: 1. What materials did Broncolor use to construct this reflector? Is the spines, locking lever, and mount made out of titanium, if not what material?

A: No, the Broncolor Para 88HR reflector F kit is made of aluminum.

Q: 2. Is there an adaptor available to use this para with Profoto strobes?

A: There is an adapter for Profoto heads called the Bron Kobold Profoto Head Adapter for Para 88, 133, 177, 222. Please see the link below for reference.

Q: 3. If I have Profoto B1 and B2 lights, can this reflector or the Para 133 be adapted? or does getting it with the rod supply all the light but then what about a power source, Do I need a power pack?

A: Yes, all four sizes of Paras can be adapted to Profoto, using the Para adapter for Profoto, B&H #BRPAP88FB, Manufacturer #B-33.489.03. The adapter attaches to the end of the included focusing rod and allows for a Profoto head to be attached like a reflector or softbox would.Your existing Profoto lights can be used, however we strongly advise using a light with a fully exposed flash tube or dome to ensure optimal light quality from the Paras.

Q: 4. Is it the same as the one include in the 1200 kit?

A: The Aputure LS1200 Series Reflector Kit comes with Three Bowens Mount Hyper Reflectors for LS 1200d Pro & LS 600c Pro Lights. They are Narrow, Medium, and Wide Beam Angles. And the 1200D pro kit comes with those.

Q: 5. Will these work with the new Aputure STORM 1200x Bi-Color LED Monolight?

A: Yes, the Aputure LS1200 Series Reflector Kit works with the Aputure STORM 1200x Bi-Color LED Monolight BH #APS1200XBC.

Q: 6. hi what is the beam spread with these reflectors? I'm trying to figure out photometric comparisons with other lights.

A: The Aputure LS1200 Series Reflector Kit includes three reflectors. The reflectors are 15, 30 and 45 degrees.

Q: 7. I ordered this para 88 kit from our local provider. And now I want the 133 but don't have the budget. Can I buy only the 133 reflector (I know there is a separate reflector for the 88 B-33.482.00) and adapt the focusing tube from the 88?

A: The Para 133 reflector is not available standalone, it can only be purchased with the focusing device and focusing tube F or FT

Q: 8. Is there an adapter available to use this reflector with Photogenic Solairs?

A: Unfortunately, there are no adapters available for the Photogenic Solair to the Broncolor Para 177.

Q: 9. Can we use those with Aputure 600d ?

A: Yes, the LS1200 Series Reflector Kit can also be used on the Aputure LS600d lamphead.

Q: 10. Can you confirm that HR version is identical to non HR version but with higher heat resistance? I want use this for both still and video and I dont want make mistake. Thanks.

A: The HR version and non-HR version offer the same assembly method, though the use of high-heat materials allows for the 'focused' position of the lamp to be slightly brighter than the non-HR Para. If the intended use is both strobe and continuous lights, the HR version is recommended.