The extra-small, chroma key blue Bubblebee Spacer Bubble Windshield & Fur Cover for Small Micsis a multipiece, adaptable windshield system for small-diaphragm microphones that allows you to quickly switch from indoor to outdoor recordings in a matter of a few seconds. It fits microphones 18 to 24mm in diameter and has an inner depth of 55mm to cover all the ports on the mic. Designed specifically for boom operators, videographers, sound mixers, and sound recordists working under changing locations, it greatly reduces noise from wind, vocal plosives, and boom 'swoosh' while remaining acoustically transparent. The system includes the Spacer Bubble, The Long-Hair Spacer Cover (fur), and a mesh storage bag.

Reduces Wind Noise    Fits Microphones 18 to 24mm in Diameter    55mm Inner Depth    The Spacer Bubble Windshield    The Long-Haired Fur Cover    Acoustically Transparent Design    Quick-Drying Fur    Mesh Storage Bag

• Sennheiser: ME 64, MKH 8050, K6
• Shoeps: CMC Series
• DPA: 4006, 4011
• Audio-Technica: AT-4053
• Rode: NT55
• Sony: ECM-MS2
• Audix: SCX1C

• The Spacer Bubble windshield is constructed of a noise-free mesh base with coarse foam inside. The company's specially designed rubber base provides easy and secure mounting to keep the windshield firmly in place.

• Switch locations fast and get great audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh', and wind.
• Specially designed rubber base for fast, easy, and secure mounting.
• The Base windshield is made from highly efficient mesh, allowing your microphone to sound as natural as possible.
• The slip-on fur is made from Bubblebee Industries' best high-density imitation fur, which allows for optimal frequency transparency and effective wind protection.
• Quick-drying fur: If it gets wet, simply place the fur cover it in the aerated mesh bag and allow it to dry naturally.
• Practical mesh bag is included for easy storage and fast mounting.
• Designed in Denmark by sound lovers, for sound lovers.

• The combination of the foam and mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip on the included long-haired fur cover and get effective wind noise protection with optimal transparency within seconds.
• If you're working in light-to-medium winds, you can use The Short-Haired Spacer Cover (available separately) instead.

Related Questions and Answers

Q: 1. How can you plug it into IPhone ? Does it need an adapter or directly ?

A: You can connect the Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone to an iPhone by using the Rode SC15 Lightning USB Type-C to Lightning Accessory Cable (B&H # ROSC15). The SC15 cable will allow you to connect the mic directly to the iPhone and then use the mic's 3.5mm jack for headphones to monitor the audio while recording.

Q: 2. If I attach the LG size Spacer Bubble Windshield and Fur Cover to the AT BP4029 (AT835ST), how much mic shaft will be left?

A: The AT BP4029 is 9.29" long, and the Spacer Bubble Windshield & Fur Cover System has an inner depth of 5.1", so the remaining shaft would be 4.19".

Q: 3. Can this Windbreaker be used with the Rycote Super-Blimp Kit for Rode NTG?

A: The Bubblebee Industries The Windbreaker for Rycote Modular Windshield WS 4 Kit is built specifically for the Rycote Modular Windshield WS 4 Kit system. It is not meant to be used with other windshield systems, and compatibility is not guaranteed.

Q: 4. Mkh50?

A: No, the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Black, Extra-Small) is not compatible for use with the Sennheiser MKH 50 Microphone. All of the Spacer Bubble models are designed to fit microphones that have a diameter of 18 to 24mm, but the MKH 50 has a 25mm diameter. As a better option, you can use the Rycote Super-Softie Windshield for Shotgun Mics - 5cm, 24/25 (B&H # RYWSQAT), which is designed to fit mics that have a diameter of 24 to 25mm and it is compatible for use with the MKH 50.

Q: 5. Whats the difference between long and short hair?

A: The simple answer is that a windshield with longer hair can provide better protection for the microphone against wind noise in very strong wind because the longer hair and varying lengths can help to slow down the wind's speed before it reaches the mic. A windshield with shorter hair generally works very well to protect the microphone against wind noise in low- to mid-level wind. Additionally, the shorter hair allows a microphone to retain more of its original frequency response.

Q: 6. Will it work to record live music/concert?

A: Yes you can use the VideoMic GO II to capture live concert audio.

Q: 7. Which Bubblebee Long Hair Windkiller for the Azden SGM-250CX Short Shotgun Microphone? Small or Extra Small?

A: The Azden SGM-250CX Short Shotgun Microphone requires the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Small, Black). The capsule section of the microphone is 4" long, and the windshield is 4.1" long.

Q: 8. Will this work with the AT4053B?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics is compatible for use with the Audio-Technica AT4053b Hypercardioid Condenser Microphone.

Q: 9. What is the length of the item?

A: The manufacturer has provided dimensions for the inside depth of the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Extra-Small) which is 2.2" (55mm). It can be used with microphones that have a diameter of 0.7 to 0.9" (18 to 24mm).

Q: 10. Can I connect this mic directly to a GoPro 10 inside a Media Mod? Or do I need an adapter? Thanks!

A: Yes, the Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone can make a direct connection to the GoPro Media Mod for HERO9/HERO10 using the 3.5mm connections on both devices.