You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Xvive U4t Wireless Transmitter For In-ear Monitors 2.4ghz

Xvive U4t Wireless Transmitter For In-ear Monitors 2.4ghz
  • Product Code: eq119243
  • Availability: In Stock

$387.00 $611.46

The U4T from Xvive Audio is a handheld plug-on transmitter that works with U4R receivers (available separately) to provide performers and presenters with a cost-effective and expandable solution that supplies 24-bit / 48 kHz digital sound quality to their favorite in-ear and headphone monitors. The system is well suited for use in a wide variety of settings including musical venues, theatres, houses of worship, schools, corporate conference rooms, and more. Adding an additional U4T to an existing system allows you to send a separate monitor mix to different performers; you could send a monitor blend with more vocals to the singer for example.

The portable easy-to-use U4T features a tough molded-plastic and cast-metal chassis, built to handle the rigors of touring and is powered by an internal, unreplaceable battery that offer 5 hours of operating time. The battery is recharged via a USB port. The transmitter works with basically any mixer or other device that has an available balanced XLR or unbalanced 1/4" output jack. Just plug the transmitter in, and it will broadcast the incoming audio to any of its six selectable 2.4 GHz channels. Simply set the separately available bodypack receivers to the same channel and you're good to go. The system provides a 90' line-of-sight transmission range with only a 5 ms latency, low enough for musical applications.

Use with U4R In-Ear Wireless Receivers    2.4 GHz Band Works Anywhere in the World    Plugs into XLR or 1/4" Gear    5 Hours on Built-In Rechargeable Battery    24-Bit / 48 kHz Audio Quality    5 ms Latency

Parameters
Tuning Bandwidth2400 to 2483.5 MHz
Working RangeUp to 90' (Actual Range Depends on Rf Signal Absorption, Reflection, and Interference)
Audio Frequency Response20 Hz to 20 KHz (-3 dB)
Dynamic Range107 dB
RF Sensitivity-88 dBm
Total Harmonic Distortion0.2%
RF Output Power10 mW EIRP Max
Operating Temperature Range0 to 135° F / -18 to 57° C (Battery Characteristics May Limit this Range)
Channels6
LatencyLess than 5 ms
Audio Resolution24-bit / 48 kHz
Impedance47 Kilohms
Audio Input ConnectorsBalanced XLR Male
Audio Input LevelsAux Mode: -10 dBV, Maximum +12.2 dBu
Line Mode: +4 dBu, Maximum +22 dBu
Antenna Impedance50 Ohms
Antenna Type1/4 Wave Sleeve Dipole, Nonremovable
BatteriesTransmitter: 3.7 V Rechargeable Li-Ion, 860 mAh
Battery Life5 Hours
Charging Time2.5 Hours for Full Charge (Useable While Charging)
DimensionsTransmitter: 1.2 x 1.1 x 3.9" / 3.0 x 2.8 x 10.0 cm
WeightTransmitter: 3.2 oz / 90 g
Packaging Info
Package Weight0.585 lb
Box Dimensions (LxWxH)5.35 x 3.55 x 2.7"

  • Plug-on transmitter designed for use with up to six U4R receivers (available separately) to provide a hands-free in-ear monitoring system for performers
  • Simple to use: plug in the transmitter and set the transmitter and receiver to the same channel—that's it
  • 2.4 GHz system works anywhere in the world—ready to go where the tour goes
  • System offers 6 wireless channels to choose from, allowing you to expand with additional transmitters (available separately) and send different monitor mixes specifically tailored to the needs of your performers

  • U4T offers 24-bit / 48 kHz digital audio with a 107 dB dynamic range and a 20 Hz to 20 kHz frequency range
  • 90' line-of-sight transmission range with only 5 ms latency
  • Built-in rechargeable battery powers transmitter for 5 hours, fully recharges in 2.5 hours
  • Plugs directly into XLR out on mixer
  • Includes adapter for use with 1/4" TS mixer output

  • Line mode: Use with mixers or other professional audio devices that send line-level signals
  • Aux mode: Use when connecting consumer audio devices such as portable audio players or computers

Related Questions and Answers

Q: 1. can this be expanded to have more receivers later?

A: Yes, you can add more U4R receivers to expand the monitoring system.

Q: 2. Can this be used to connect a mixer with speakers?

A: Yes, the transmitter for the Xvive Audio U3 2.4 GHz Digital Wireless Microphone System accepts line level input signal so the system can be used to connect a mixer with speakers. Keep in mind that this system has an operating range of up to 90 feet line of sight.

Q: 3. Is this mono or stereo?

A: The input is a mono XLR connection. The output would be dual mono from the stereo output jack.

Q: 4. Can the receiver be plugged into a mixer that has phantom power activated on all mic channels?

A: Yes. It will not be a problem.

Q: 5. How many transmitters can I use simultaneously?

A: You can use up to 6 transmitters simultaneously in the Xvive Audio U4 Wireless In-Ear Monitor System.

Q: 6. Can it be connected with more than one receiver?

A: NO it can NOT, it is a 1:1 system

Q: 7. will 1 trans. work on 2 rec.?

A: No this is a one to one system.

Q: 8. Can this compatible with other Xvive wireless systems such as the U3? For example, can I use U3 transmitter with U4 receiver on the same channel?

A: Yes, according to Xvive, it is possible toa use a U3 transmitter with a U4 receiver when both units are set on the same channel. Xvive has a video posted on their Facebook page that shows the setup in use: http://www.facebook.com/xviveaudiousa/videos/can-a-u3-transmitter-work-with-a-u4-receiver-heres-live-proof-that-you-can/2287201628250839/

Q: 9. What frequencies does this transmit on?

A: The Sennheiser SR 2050 (A+) transmits on 470 MHz to 558 MHz.

Q: 10. Can one transmitter be used to two receivers?

A: Yes, the audio from one Xvive Audio U3T 2.4 GHz Digital Wireless Transmitter can be sent to two receivers.

08/09/2024

[24-bit / 48 kHz] I love this wireless system... No glitches in sound, easy to set up, and I love the fact I don't need to buy batteries... package say you get about 5.5hrs of charge but I seem to be getting more than eight of continues usage...

5
26/08/2024

[-88 dBm] This is a very simply and reliable way to covert your conventional dynamic wired mics to wireless set-up. The connection is solid and the quality of sound is just fantastic!

5
25/08/2024

[5 Hours] I've ordered out of Canada because I couldn't find here. I received the product in good condition and in good time. It was to replace the receiver that broke in a kit that I had bought elsewhere. Garanty was over so I had to buy another one.
Works just fine. No problem sinking with the transmitter. Happy with my purchase. Thank you!

5
28/06/2024

[10 mW EIRP Max] Love it! High quality!

5
06/04/2024

[0.2%] I really enjoyed the service.

The device is exactly what I expected

5
30/11/-0001

[10 mW EIRP Max] High quality! Love it!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

In Ear Monitors With Limiter

$297.00 $415.80

Xvive U4r2 Wireless In-ear Monitor System 2.4ghz

$1,017.00 $1,271.25

Xvive U4r4 Wireless In-ear Monitor System 2.4ghz

$1,707.00 $2,423.94

Best Limiter For In Ear Monitors

$447.00 $701.79

Dotz Clip In Ear Monitors

$38.97 $47.93

Products You May Like

Heliopan 24mm Polarizer Filter

$140.85 $185.92

Tascam Us-16x08 Usb Audio Interface

$927.00 $1,381.23

Camvate C-clamp Smartphone Clip Mount

$59.40 $79.00