Vicoustic Flat Panel Pet White 46.85X23.42X1.57

Vicoustic Flat Panel Pet White 46.85x23.42x1.57

Product Code: eq119461
Availability: In Stock

$2,367.00 $3,266.46

Qty

20 reviews Write a review

Description
Reviews (20)

This 46.85 x 23.42 x 1.57", white Vicoustic Flat Panel PET White 46.85x23.42x1.57is made from VicPET Wool - a nonwoven textile produced mainly from recycled plastic bottles. VicPET Wool is a low emitting material having earned the A+ French VOC label (ISO16000). It has also been classified as Class 1 according to OEKO-TEX 100 Standard, i.e. meeting the human - ecological requirements presently established for baby articles. In addition VicPET Wool is a fire rated product.

Flat Panels PET are designed to perform primarily in the medium and high frequencies - a great solution for any application for treating both ceilings and walls. Thanks to its green, recyclable, human-safe nature and acoustic properties Flat Panel PET can contribute to the development of sustainable projects and therefore can help you earning credits normally available in the Green Building Certification Schemes such as WELL, HQE, DGNB, CASBEE, BREEAM, etc.

Medium- and High-Frequency Treatment

Parameters
Quantity	8
Color	White
Dimensions (W x H)	46.9 x 23.4" / 1190 x 595 mm
Depth	1.6" / 40 mm
NRC Rating	0.65
Fire Rated	Yes

Related Questions and Answers

Q: 1. Does this stand work with PN-C705B?

A: Yes. The Sharp PN-SR780M is a recommended accessory for the the SHARP PN-C705B.

Q: 2. Can this cart handle a 22" monitor with 100x100 VESA mount? Will mounts extend outside monitor or can these be removed?

A: This can handle any 100x100 VESA screen, however the mounting brackets may extend outside of a 22" screen.

Q: 3. does this stand work with the sharp PN-L802B?

A: The Sharp PN-SR780M stand is compatible with the PN-L802B display.

Q: 4. The specs state how high the flat panel can be mounted, (assuming that is the center of the panel) I need to know how low it can be mounted.

A: We just purchase one of these and it is very well made. There is a slot on each side and while we put ours to the top side, the slot seems to allow the screws to adjust all the way to the bottom, so it looks as though the bottom of the monitor/tv would go at or near the floor. I would buy this one again it is the best I have seen, though pricey.

Q: 5. What is the maximum TV weight this can handle?

A: The Gabor Flat Panel TV Cart for 55-85" Displays BH #GAFPC85 will accept: Load Capacity: 200 lb / 90.7 kg (Total) 25 lb / 11.3 kg (Shelf)

Q: 6. What is the maximum possible height of the lower a/v shelf?

A: The lower shelf can go as high as the entire height of the stand so long as nothing is blocking it from going up, and the screws that secure it to the poles are undone.

Q: 7. Being that it takes three to make a triangle, does this come with the three connectors or is this just one connector?

A: The Aputure Triangle Flat Connector for INFINIBAR Series LED Panel Lights is one unit. If you do want to make a triangle, you will need three in total.

Q: 8. Can this support a vertically mounted tv?

A: No, this is for horizontal mounting only.

Q: 9. which software is included? MAC COMPATIBLE?

A: Software is not listed as included with this product. Product can use Telescript software which is windows based. Further details can be seen here: https://telescript.com/software/

Q: 10. Hi. We've got this cart and will be mounting a Samsung BE82T-H display to it. The Samsung manual says the mounting screws have to be 20-22mm. The only screws included with the cart that fit the display are the M8x25mm screws. Even with the screws through the mounting pieces, the length of the remaining screw is close to 23mm. We don't want to chance damaging the display, so I assume we'd then use washers. However, the included washers are too small for the M8 screws to fit through. Would it be acceptable to purchase washers that do fit at a hardware store? It seems to make sense, but I just want to make sure we're okay doing this. Thanks!

A: Yes you will be okay using different washers that will fit your screws.

CreativeDesigns	29/09/2024
[White] I have three of these umbrellas in use in my studio. I primarily use them with the cover on for my backdrop strobes, and occasionally as a fill modifier. I also use these with big groups when soft boxes aren't appropriate. The umbrellas are excellent quality. The build is good and they do not seem cheap at all. I have had two for several years, and a third just purchased recently. The quality of light is excellent as well. I have tried the shoot through mode once or twice and it is effective (But not something I typically do). The only thing that I could say isn't great about them is the fact that they can be fragile. I broke one when my light stand fell over and the light fell against the metal structure of the umbrella. Saved my strobe but bent the metal so I had to get a new one. 5

mn88	12/09/2024
[0.65] Nice material and quality. Every bit as good as I had hoped. I really like the idea of covering up the metal spokes with white reflective fabric. 5

Chuck T.	06/09/2024
[8] Does a good job of diffusing the light when bouncing a studio flash into the umbrella and furnishes good modeling of the subject. I use two of these umbrellas. The only complaint is the strap could be a little longer when wrapping the umbrella up to close it. 5

Eddie	26/08/2024
[Yes] Excellent lighting tool 5

Michael	21/08/2024
[8] Solid, light and perfect for school photography. Just photographed over 550 High School Kids with these umbrellas on my Main and Fill lights, love them! 5

Jay	13/08/2024
[White] Bought the Eclipse 45 to see if it would suit my needs and will be adding several more (larger, smaller, white, silver). Haven't had a chance to try it as a shoot-through yet, but I generally prefer dedicated, non-convertible umbrellas for that. Great quality at a good price. 5

hwmsjbug	17/07/2024
[White] Most versatile umbrella on the market with outer cover which can be removed to expose inner liner for softer light. 5

Andy	27/06/2024
[8] Cant go wrong with photogenic 5

anyonymous	14/06/2024
[0.65] I use these for portraits and most recently to take portraits of a high school symphonic band. The strobes were at full power due to the distance and the umbrella provided a very nice, uniform light over the whole band. For portrait work they provide great catch lights, and when used with a diffusion panel, a soft even light. I really like how the spokes are hidden by the inner cover. I would diffidently recommend this product. 5