This 46.85 x 23.42 x 0.78", black Vicoustic Flat Panel PET Black Acoustic Treatmentis made from VicPET Wool - a nonwoven textile produced mainly from recycled plastic bottles. VicPET Wool is a low emitting material having earned the A+ French VOC label (ISO16000). It has also been classified as Class 1 according to OEKO-TEX 100 Standard, i.e. meeting the human - ecological requirements presently established for baby articles. In addition VicPET Wool is a fire rated product.

Flat Panels PET are designed to perform primarily in the medium and high frequencies - a great solution for any application for treating both ceilings and walls. Thanks to its green, recyclable, human-safe nature and acoustic properties Flat Panel PET can contribute to the development of sustainable projects and therefore can help you earning credits normally available in the Green Building Certification Schemes such as WELL, HQE, DGNB, CASBEE, BREEAM, etc.

Medium- and High-Frequency Treatment

Related Questions and Answers

Q: 1. What is the locking mechanism for added security? I'd like to be able to add a lock to this, since it will be in a public space.

A: The VLT5 mount locks for safety, but that only secures the monitor attachment to the wall plate. This mount, among others, can be secured with a padlock: a href= http://www.bhphotovideo.com/c/product/1115674-REG/atdec_th_3060_ut_telehook_3060_singlee_display.html target= _blank http://www.bhphotovideo.com/c/product/1115674-REG/atdec_th_3060_ut_telehook_3060_singlee_display.html/a

Q: 2. is this mount compatible with Sony XBR65X800B?

A: Hi David! I used the mount for a Samsung TV. I went strictly by the size of TV more so than the particular brand. It worked great. The price was considerably lower than I found in my local stores. Hope this helps.

Q: 3. Can this stand also support standard VESA mount TVs?

A: I do not see why not. Please note: For Select Sharp A.B. 60-80" Displays 180 lb Weight Capacity Compatible Sharp AQUOS BOARD Displays PN-C603D PN-L603B PN-L603W PN-C703B PN-L703B PN-L703W PN-L803C

Q: 4. When the mount is attached to the wall what is the maximum distance for the stud location. For instance my studs are 24 inches apart. Will I be able to install the mount on the wall and hit both studs? All the TV wall mounts I saw only have a 16 inch distance. Thanks.

A: You chose well. The SANUS Premium Series VLT5 has a range form 16 to 24 . You can see here on the installation manual. http://bit.ly/1NesL4h

Q: 5. The specs state how high the flat panel can be mounted, (assuming that is the center of the panel) I need to know how low it can be mounted.

A: We just purchase one of these and it is very well made. There is a slot on each side and while we put ours to the top side, the slot seems to allow the screws to adjust all the way to the bottom, so it looks as though the bottom of the monitor/tv would go at or near the floor. I would buy this one again it is the best I have seen, though pricey.

Q: 6. What is the maximum possible height of the lower a/v shelf?

A: The lower shelf can go as high as the entire height of the stand so long as nothing is blocking it from going up, and the screws that secure it to the poles are undone.

Q: 7. Does the operating system have the capability of showing several images at once?

A: The VZ-215IPM is a monitor with onboard Android OS. The only limitation in the number of images is the software being used.

Q: 8. which software is included? MAC COMPATIBLE?

A: Software is not listed as included with this product. Product can use Telescript software which is windows based. Further details can be seen here: https://telescript.com/software/

Q: 9. Hi. We've got this cart and will be mounting a Samsung BE82T-H display to it. The Samsung manual says the mounting screws have to be 20-22mm. The only screws included with the cart that fit the display are the M8x25mm screws. Even with the screws through the mounting pieces, the length of the remaining screw is close to 23mm. We don't want to chance damaging the display, so I assume we'd then use washers. However, the included washers are too small for the M8 screws to fit through. Would it be acceptable to purchase washers that do fit at a hardware store? It seems to make sense, but I just want to make sure we're okay doing this. Thanks!

A: Yes you will be okay using different washers that will fit your screws.

Q: 10. How difficult is it to raise/lower a heavy monitor? Can a person raise it from lowest to highest position alone? Is height infinitely adjustable?

A: The stand is adjustable from 40.6 to 60.2" by depressing the pegs and raising the telescopic supports higher or lower between a series of holes. It would be difficult for one person to do with a monitor attached, but easy to do if the monitor were removed first.