Ultra-Low Noise Power Amplifier 2.5W 1500-2200 Mhz

Ultra-low Noise Power Amplifier 2.5w 1500-2200 Mhz

Product Code: eq119852
Availability: In Stock

$3,897.00 $4,715.37

Qty

18 reviews Write a review

Description
Reviews (18)

Add a powerful but compact, low-noise linear RF amplifier to your laboratory or experimental broadcast platform with this Ultra-Low Noise Power Amplifier 2.5W 1500-2200 MHzfrom RF-Links. This class AB amplifier has been designed for professional test operation and provides 50-ohm RF input and output, 28 dB gain, and up to 2.5.W RF power output. It supports transmitters in the 1500 to 2200 MHz wideband frequency range. This unit features SMA female input and output.

Linear AB Class 2.5W Low-Noise Amplifier For FM Exciters, Labs, Experimentation 2.5W Power Output, 28 dB Gain 1500-2200 MHz Frequency Range 50 Ohms RF Input/Output, SMA Female

General
Frequency Range	1500 to 2200 MHz
Output Power	2.5 W
Maximum Input Power	1 to 10 mW
Impedance	50 Ohms Input/Output
Operating Class	Class AB
Inputs / Outputs
Video I/O	1x SMA Input 1x SMA Output
Power
Power Source	Proprietary Interface
DC Input Power	12 to 14 VDC at 0.98 A
Operating Temperature	-8 to 107°F / -40 to 75°C
Physical
Dimensions	6 x 4 x 2" / 15.2 x 10.2 x 5.1 cm
Weight	10.6 oz / 300 g

Ideal for broadband laboratory, RF power exciters, and experiments

1500 to 2200 MHz frequency range

2.5W output power

Solid-state Class AB linear design

Compact, lightweight, rugged, and reliable

50-ohm input/output impedance

Related Questions and Answers

Q: 1. How do I compare this to the Goal Zero Yeti 1500x? Are the two equivalent? What is the difference?

A: According to each website, they list the following Battery Specs. Jackery: Capacity: 1488Wh (36V, 41.3Ah) Cell Chemistry: Panasonic 18650 Li-ion Batteries Lifecycle: 500 cycles to 80%+ capacity Management System: BMS, Over Voltage Protection, Short Circuit Protection GoalZero: Cell chemistry: Li-ion NMC Pack capacity: 1516Wh (10.8V, 140.4Ah) Single Cell Equivalent Capacity: 421Ah @ 3.6V Pack Lithium Content: 126g Lifecycles: 500 Cycles to 80% capacity (Discharge rate: 1C, Full charge/discharge, Temp: 25C) Shelf-life: Charge every 3-6 months Management system: MPPT charge controller

Q: 2. Will these props work on the Evo 2 enterprise 6k?

A: The Autel Robotics Low-Noise Propellers for EVO II (Pair) will work for the EVO II Enterprise drones.

Q: 3. Can this unit be used for a large format printer? Such as an Epson SureColor P9000?

A: Yes, based on the power specifications for the Epson P9000, it should be able to handle the printer without a problem.For reference:Power Consumption Operational 75 WattPower Consumption Stand by 19 WattPower Consumption Sleep 2 Watt

Q: 4. How do you monitor the signal on a Canon R5C with this unit?

A: In order to monitor audio through the Beachtek DXA-ALEXA Low-Noise Preamplifier, you will need to connect the camera's 3.5mm headphone output to the 3.5mm return jack (labeled "RTN" on the DXA-ALEXA, which is next to the unit's headphone jack (labeled "PHONES"), and then connect your headphones directly to the DXA-ALEXA.

Q: 5. Is the fan always on? Or does it only turn on when charging the battery or when delivering power? If the fan only comes on when needed, how often does it turn on?

A: I've used many of these over the last couple of decades and I've never heard a fan come on unless the power is out and the unit is supplying the power.

Q: 6. Hi , would this be a able to power 2 x 500 w studio lights?

A: The Jackery Explorer 1500 Portable Power Station can handle two 500 watt strobes at full power. It might not last more than about 500 flashes at the most.

Q: 7. Do you need any special attenuator cables to make it work with the Canon R5C or will a 5-pin XLR to 3.5mm work?

A: You could use an XLR 5-pin female to 3.5mm TRS male cable like the Wooden Camera Single 3.5mm TRS to 5-Pin Female XLR - 18" (B&H # WO808010) to send line level audio from the Beachtek DXA-ALEXA Low-Noise Preamplifier to the Canon EOS R5 C Mirrorless Cinema Camera. As another option, you can use the 3.5mm mic output on the DXA-ALEXA to send mic level audio to the camera's 3.5mm TRS input.

Q: 8. Will the 1500' version still communicate with the 750' transmitter?

A: Yes, the SmallHD ULTRA 7 Bolt 6 RX 1500 Monitor (V-Mount) will connect to both 1500 and 750 Teradek transmitters.

Q: 9. Can it only mount on rods or does it have 1/4-20 screw mount?

A: The Beachtek DXA-ALEXA has three threaded 1/4/20 holes in the base of the unit.

Q: 10. Will this work with a Canon R5C?

A: Yes. Although the Beachtek DXA-ALEXA Low-Noise Preamplifier is intended for use with the ARRI ALEXA Mini Camera, you can connect the 3.5mm mic output from the DXA-ALEXA to the 3.5mm mic input on the Canon EOS R5 C Mirrorless Cinema Camera to record audio in the camera.

John	09/09/2024
[2.5 W] Amp arrived on time and in good condition. Everything worked correctly out of the box. No issues. Working well after 10-15 hrs of simultaneous use of both channels. 5

Kenneth	07/09/2024
[Class AB] Being that these are original props for the Air 3 they work great as expected. I do not hear the difference in the noise level but I'm deaf anyway. DJI is trusted by me to make quality products for their drones. 5

Tom	12/08/2024
[1 to 10 mW] This is a really solid amp. The fan is quiet, and the amp is electrically quiet. Easy to use, takes standard XLR in and has both binding post and the speakeron connectors. I purchased this to replace the power amp part of an old Yamaha stereo receiver. I wasn't able to find anything of decent quality as a consumer amp, and the high end hifi amps seem to be both overpriced and of questionable quality. So I went pro audio, as friends of mine had done years ago. This is definitely the way to go. For road use with a band, I think I'd look at the new Crown class D's. I have one, I love it, and it's significantly lighter than this, and with a few more features. They sound absolutely identical. Both have much more headroom into actual speakers than the old receiver did. Can't recommend this highly enough. 5

Kevin	09/08/2024
[Class AB] Got one of these to power a Pro-Ject Pre-Box S2 Digital DAC. Really surprised how much difference it makes. Just removed veils to make sound detail clearer, soundstage more precise, and lowered noise floor. Bought another one for a J-Tech Digital video converter that parses audio from an HDMI feed to send it to audio system. The video converter sends the video feed on to the video monitor. The iFi power supply makes the video sharper, blacks blacker, and lower visible digital noise at 1080p resolution. Will be ordering another to try on an Amazon Fire Stick - hopefully it will be further video enhancement 5

Brady	06/08/2024
[1 to 10 mW] Super clean sound at a great price! 5

Sam	04/08/2024
[Class AB] DJI has the best quality propellers! 5

Raymond	29/07/2024
[1 to 10 mW] The 5V iFi Power is powering my bluetooth receiver for my vintage amp. Music streamed from my iphone now has an expanded sound stage and a lower noise floor. Sounds great. 5

Tom	05/07/2024
[1 to 10 mW] This is just such a solid piece of equipment. Electrically and acoustically quiet, as other reviewers have mentioned. It isn't under rated from what I can tell - it's an honest 330W/8 ohms, and that's into real world speakers. The only disadvantage to this amp is that it's a bit heavy, but it's still quite a bit lighter than the old solid state amps with similar ratings from the 80's and 90's. If you're doing live sound, I'd probably look at the similarly priced Crown XLS instead, but if you prefer AB instead of D for whatever reason, I don't think this can be beat. For studio work, or upgrading the amp(s) for a home theater or listening room, this would be perfect. 5