Transport and protect your DJI Mini 3 with this orange Case with Custom Foam Insert for DJI Mini 3 from Nanuk. This hard-shell case is crafted from thick, impact-resistant NK-7 resin, and it is MIL-SPEC certified and IP67 rated. This makes it waterproof and dustproof, ideal for all types of professionals, from videographers to first responders and even the military. A foam-lined interior is custom-cut to support the drone and accessories, and everything is secured with the PowerClaw triple-action latching system. Traveling is easy, thanks to the case being airline friendly and providing an integrated pressure valve.

Fits DJI Mini 3 and Accessories    Custom-Cut Foam-Lined Interior    Crushproof, Dustproof, and Waterproof    Lightweight NK-7 Polypropylene Resin    Airline Friendly    PowerClaw Triple-Action Latching System    Automatic Pressure-Release Valve    Holes Accommodate Optional Padlocks    Built-In Fold-Down Carry Handle

Most clamp latches are secured in one place, then pushed down to secure them in place. If something were to catch on the latch and pull, the clamp could easily accidentally release and open your case. To prevent that, the PowerClaw system uses a triple-action latch made from tough nylon with stainless steel hardware. With the case laid flat, each latch clamps at the top like normal, but an additional bottom latch hooks on as you push the latch against the case. This provides both top-down and bottom-up force, drastically preventing accidental openings and providing you with more security as you transport your gear.

As your altitude changes on a flight, so does the air pressure. In a closed hard-shell case, this can create a vacuum seal that effectively locks it shut. This valve automatically equalizes the pressure inside the case as the air pressure around it changes, so it's always easy to open. The micro vent that allows this to happen is specially designed to let air pass through, but not water, so your gear is still protected inside.

The 915 case can either be checked in as luggage or taken on the plane as a carry-on.

Integrated holes provide additional security for your gear by allowing you to add optional padlocks to the PowerClaw latches.

Transporting your gear is easy, thanks to the integrated fold-down carry handle.

Related Questions and Answers

Q: 1. what is country of origin for this Nanuk 930 case? Thanks.

A: Canada

Q: 2. Will this fit a Leica M typ 240?

A: Yes this will. The interior dimensions measure 9.3 x 7.1 x 4.1 / 23.6 x 18.0 x 10.4 cm

Q: 3. Would it work with DJi RS4 ?

A: Considering the slight differences in design of the gimbals, the Nanuk Waterproof Hard Case with Custom-Cut Foam Insert for DJI RS 3 and RS 3 Pro Combo (Silver) may not fit the DJI RS 4 Gimbal Stabilizer well. We would recommend the Nanuk 930 Hard Case with Foam Insert for DJI RS 4/RS 4 Pro Combo (Silver, 26.5L), BH #NA930S080SV, for the best fit.

Q: 4. I’d like to use this for a pair of Lite Panel Astra 6X’s. Can anyone clarify the interior dimensions of the padded insert trays without the small dividers in place?

A: While Pelican does not publish the dimensions of the insert trays on their own, theLitepanels Traveler Case Duo with Custom Foam for 1 Astra Soft and 1 Astra (Black), BH # LICF2A is modeled off of the Pelican Storm Case IM2750 and contains pre-cut inserts specifically for the Astra series panels. http://bhpho.to/2XUHNbE

Q: 5. Are you able to insert the RC Pro controller instead of standard controller that comes with Mavic 3?

A: The Nanuk 915 Waterproof Hard Case with Insert for DJI Mavic 3 (Black) will not fit the DJI RC Pro controller and will only fit the standard controller.

Q: 6. Will it fit a Nanuk 925 case ?

A: Unfortunately no. The Go Professional Cases DJI FPV Props Foam Replacement Insert for FPV Case will not fit the Nanuk 925. The foam insert dimensions are 13 x 9 x 5" and the Nanuk 925 will require 17 x 11.8 x 6.4".

Q: 7. Can this case be checked in as checked luggage without the oversize fee of $200? Manufacturer says L+W+H is 61.9" really close to the required 62" or less.

A: Exterior Dimensions for this case are 25.0 x 23.7 x 13.1" , The maximum dimensions for a carry-on bag are 9 inches x 14 inches x 22 inches

Q: 8. Does the gimbal fit when set at different balance configurations? Essentially, do you need to reset the gimbal's physical setup every time you pack it in the case?

A: Yes, you would need to reset the gimbal's physical setup to fit it in the Nanuk Waterproof Hard Case with Custom-Cut Foam Insert for DJI RS 3 and RS 3 Pro Combo (Black). However, the DJI RS 3 and Pro gimbal settings and plate have scale markings so that even when disassembled you will be able to mount the camera in the proper position so it will be balanced every time.

Q: 9. Which specific case does this foam fit inside?

A: The Go Professional Cases Foam Insert for DJI Mavic 3 Enterprise Case is specifically for the stock case that comes with the DJI Mavic 3 Enterprise.

Q: 10. Is this a hard sided case?

A: Hi Remington,The case shell is manufactured by Pelican (Storm series), with a custom foam insert that houses the fixture and lens pouch. The case also includes a padded barn door pouch to protect that accessory during travel.Jordan