Kondor Blue Microphone Shockmount

Kondor Blue Microphone Shockmount - Raven Black

Product Code: eq120110
Availability: In Stock

$207.00 $291.87

Qty

12 reviews Write a review

Description
Reviews (12)

Mount your shotgun microphone to a camera or boom with the black Mic Shockmount from Kondor Blue, a lightweight yet durable universal mount with a metal body and flexible o-rings that suspend the mic to isolate it from handling noise.

At the base of the mount is a Nato rail with safety pin stoppers, which allows you to use the mount with additional Kondor Blue accessories such as the Nato Anti-Twist Clamp or the Nato Clamp to Ball Head for Magic Arms (both available separately). A 3/8" Arri mount and two 1/4"-20 threads are also supplied. Use the included 3/8 to 1/4" bushing to create an additional 1/4"-20 thread if needed. The o-ring suspension system allows the shockmount to accommodate a wide variety of microphone models, and two additional backup o-rings are included.

For On-Camera and Boom Mounting Lightweight & Durable Metal Construction Nato Rail with Safety Pin Stoppers 3/8" Arri Mount Two 1/4"-20 Mounts Captive Suspension Rings for Isolation Extra Suspension Rings Included

General
Compatibility	Not Specified by Manufacturer
Physical
Mounting	Bottom: 2x 1/4"-20 Thread Bottom: 1x 3/8" Arri Mount
Color	Black
Material of Construction	Metal
Dimensions	3 x 2.7 x 2.4" / 77 x 68 x 60 mm
Weight	3.4 oz / 96 g
Packaging Info
Package Weight	0.38 lb
Box Dimensions (LxWxH)	5.6 x 4.1 x 3.2"

Related Questions and Answers

Q: 1. I'm in need of a replacement cable for my Sandisk SSD drive. Is this compatible?

A: If your Sandisk SSD drive has a usb-c port, the Kondor Blue Right-Angle USB 3.1 Gen 2 Type-C Cable is compatible.

Q: 2. Does the length include the two plug ends or is it just the cable part?

A: The Kondor Blue Right-Angle USB-C 3.1 Gen 2 Cable (8.5", Cardinal Red) is 8.5" from end to end when measured laying straight out on a flat surface.

Q: 3. Does the rig come come with the KB hdmi cables?

A: No it does not.

Q: 4. Is this fully compatible with the Sony Alpha 1?

A: Yes it is

Q: 5. Is the included handle the handle from Kondor Blue that fits a ssd problade drive inside of it?

A: No, the handle in the Kondor Blue Camera Cage with Top Handle for Panasonic Lumix S5II/X kit is a run stop control handle. Kondor Blue PRO-BLADE SSD Recording Handle (Raven Black) BH #KOKBPBSSDBK

Q: 6. is it compatible for the ninja v too?

A: Yes, the Kondor Blue Director's Monitor Pro Kit (Raven Black) is compatible with the Atomos Ninja V 5" 4K HDMI Recording Monitor.

Q: 7. Will the Panasonic DMW-XLR1 XLR Microphone Adapter still fit on top of the camera if the cage is fitted?

A: Yes, the following cage is designed and made to have accessibility to the units hotshoe.

Q: 8. Is there any wiggle or play at all? How rock solid does it feel when it's in place?

A: The Kondor Blue Quick Release Rosette Handgrip uses an ARRI-type rosette that fits perfectly with any ARRI rosette accessory. This is a standard that is secure and fits perfectly between ARRI rosette accessories.

Q: 9. fit new A7 iv?

A: Yes, Kondor Blue does list the following models: "A7iv, A1, A7Riv, A7Sii, A7Siii" as compatible with the Kondor Blue Ultimate Rig for Sony a7 S/a7 R Series.

Q: 10. Will the new Sony FX3 fit in this cage?

A: Yes, the Sony FX3 can fit in the Kondor Blue Sony A7 Series cage.

Luke	17/09/2024
[Black] This inexpensive piece attaches via a 1/4 20” and saves you the need to hold that extra gear. Mounting the cold shoe plate to the side of your camera or gear cage is like having another arm, and saves you from a jumbled mess. For $10, this is a must have for folks who use cold shoe mounts daily. 5

Jeff	16/09/2024
[Black] Solid build, no wiggle. Looks nice and provides the necessary mounting points and stability for a wide variety of scenarios. Works well with the VR lens too- everything is behind the lens, so no obstructions. 5

Rebecca	14/09/2024
[Black] I use this cable to connect my monitor to my Canon R6M2 camera. Better quality then other cables I have tried in the past. 5

Brendan	08/09/2024
[0.38 lb] I got this and a simple hand grip over the shape one that costs hundreds, it works great. 5

Martin	26/08/2024
[Black] Most cages for the Canon R5 C (and R5) block your path to change the filter in the Canon filter adapter. This cage leaves that path open. It additionally is build very solid and the quality is excellent. 5

Lukas	23/08/2024
[Metal] The attention to detail is impressive and was pleased to find a 1/4-20 hole on the bottom of the grip! This is a wrist saver! 5

Kent	19/08/2024
[Black] I could be wrong about this, others are prone to disagree, but it gets complicated. This was purchased to complement the Kondor Blue 501 Adjustable Baseplate. Without this piece of nicely machined, symmetrical alloy, spring releases on both ends, there isn't a large flat surface on the Baseplate to attach directly to any other surface. The Dovetail fits nicely into the Baseplate. Dandy. With some platforms that might well be sufficient. However, most tripod heads and surface mounts have their own dovetail receptacle which require yet another dovetail plate. What you end up with is plates mounted back to back, or more accurately: front to front. Or am I missing something? One minor annoyance: my two plates front to front were not thick enough for the length of a standard ¼-20 camera attachment screw. The end of the screws impede the free sliding of the baseplate along the dovetail. Had to add a bit of spacer between the two dovetails. I know- clear as mud. But there you have it. 5

Kevin	17/07/2024
[Metal] The specs show that the package is 4 long. Why I would care I don't know. The plate itself is very short, 1.95 / 50mm long. If you are planning to add a second screw and mount it in two places, you have exactly 1.37 / 35mm screw center to screw center to mount both. My smallrig universal large cage doesn't have screws that close together on the bottom. Worth measuring. 5

Jared	16/04/2024
[0.38 lb] Excellent piece of hardware. My only criticism is that I wish it was quicker to attach and remove from a camera cage for rebuilds. But that might compromise it's integrity and am ok with that for now. 5