The ColorKey Dazzler FX Cold Spark Powderis made specifically for ColorKey Dazzler FX Cold Spark Machines. The 7 oz of cold spark Ti granules come in a vacuumed sealed pouch and can produce approximately 15 minutes of spark effect up to 15'. The grains produce cool-to-the-touch sparks without the possibility of igniting a fire, as there's no use of flames or combustibles. The effect produced is virtually odorless and without smoke.

For Dazzler FX Cold Spark Machines    7 oz Ti Cold Spark Powder    Cool-to-the-Touch Sparks    15 Minutes of Spark Effect up to 15'

Related Questions and Answers

Q: 1. Does this device decode one NDI stream and encode another NDI stream at the same time?

A: This item BH #NENSP4KIO will only support one NDI signal at a time.

Q: 2. Is the audio jack for input or monitoring?

A: The audio jack is for inputting, it is not a headphone jack for monitoring. It is a line level audio input.

Q: 3. What is the total power consumption in watts for POE use?

A: The NewTek Spark Plus I/O 4K uses the 802.3af PoE standard and requires 15.4 Watts of power. POE AF injector idea - https://bhpho.to/3Xjmqy6

Q: 4. The pictures show the lens has the Sweet 50 Optic with it. Does it come with that or was it just shown in the pictures?

A: No, the Lensbaby Spark 2.0 only comes with the Lensbaby Spark 2.0 and a limited 1-year manufacturer warranty.

Q: 5. Has anyone measured latency of the SDI version vs the HDMI version on the same camera? Curious if the SDI version has significantly less delay.

A: No it does not. the delay from the camera to the Newtek Spark is almost non existent when compared to the delay that happens when converting a video signal to be sent across a network and the bandwidth limitations of said network. If you purchased both the SDI and HDMI versions and hooked them up to a cameras on the same network you should experience the same delay.

Q: 6. Does this support NDI-HX like the original Connect Spark?

A: according to the manufacturer specification this supports NDI, there is no mention of NDI HX support

Q: 7. Umm...what are the dimensions?!

A: The dimensions for the Colorkey StageBar TRI 12 RGB Wash Bar are listed as 39.3 x 2.4 x 2.4".

Q: 8. want to use this equipment to hang a Kino Flo 4bank light and I wanted to know if it can support that weight or how many kg it supports. Another question is if it comes in 2 parts or is it just a single piece of a single tube? Is it compatible with Impact extension tubes?

A: There would be no issue with using a KinoFlo 4bank (either the 2' version which weighs 7.5 lbs or the 4' version which weighs 11.5 lbs) with the Kupole. I contacted Kupo regarding your inquiry. According to Kupo, if you are using a single Kupole mounted between a rigid floor & ceiling, and with the rubber pad attached on the rubber cover, if the light fixture is extended up to 0.5 meters (19.68 inches) from the Kupole, it should support up to approximately 24 kg (52.91 lbs). If the fixture is extended 1 meter (39.37 inches) from the Kupole, it will support approximately 12 kg (26.45 lbs). If you are using a single Kupole braced horizontally (wall to wall) with rigid walls, it will support up to 15 kg (33 lbs). If you are using a three-Kupole setup, two poles positioned vertically and one horizontally functioning as a crossbar, the crossbar will support up to 20 kg (44 lbs).

Q: 9. Can I use this as a virtual input for a web video conference system?

A: Configured over a Web-based user interface, Spark Plus 4K allows you to connect your camera, webcam, or computer to stream live over the Web or other broadcast platforms.

Q: 10. Does this include two autopole?

A: No. One unit per order.