You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

45w Microwave Amplifier 2300-2500 Mhz | Rf-links Wideband

45w Microwave Amplifier 2300-2500 Mhz | Rf-links Wideband
  • Product Code: eq120315
  • Availability: In Stock

$5,697.00 $7,406.10

Add a powerful but compact, high-power linear RF amplifier to your TV broadcast platform with this 45W Microwave Amplifier 2300-2500 MHz | RF-Links Widebandfrom RF-Links. The aluminum amplifier has been designed for research, military communications, and laboratory testing applications, and it provides 50-ohm RF input and output, over 11 dB gain, and up to 45W RF power output. It supports transmitters in the 2300 to 2500 MHz broadband frequency range. This unit features SMA female input and output and it requires a separately available 13V power supply.

High-Power Linear RF Amplifier    For Lab, Research, Military Applications    45W Power Output, 11 dB Gain    2300-2500 MHz Frequency Range    50 Ohms RF Input/Output, SMA Female

General
Operating Frequency Range2300 to 2500 MHz
Output Power45 W
Gain11 dB
Impedance50 Ohms (Input/Output)
Inputs / Outputs
Video I/O1x SMA Input
1x SMA Output
Power
Power SourceProprietary Interface
DC Input Power5 to 14 VDC at 8 to 10 A
Operating Temperature12 to 87°F / -20 to 55°C
Physical
Material of ConstructionAluminum
Dimensions7.56 x 3.15 x 0.87" / 19.2 x 8 x 2.21 cm
Weight1.1 lb / 500 g

Ideal for research, military communications, laboratory testing applications

2300 to 2500 MHz frequency range

45W output power

Compact, lightweight, rugged, and reliable

50-ohm input/output impedance

Requires 13V power supply

Related Questions and Answers

Q: 1. It needs 12VDC 1.3A (15.6W), but is the barrel centre-positive or centre-negative?

A: The Listen Technologies Stationary RF Transmitter (216 MHz), BH # LILT80021601, features a center-positive 12VDC input port.

Q: 2. What AC power should I use for this?

A: The PSC RF Multi SMA (470-960 MHz), B&H # PSRFSMAWB, is powered from any source of external DC power of 10 to 15 VDC at 120 mA. Connect a source of external 12 VDC power to the Hirose 4-pin connector on the bottom of the unit.

Q: 3. Can I use this Distribution System for my Shure in-ear units? Or is there a system better suited for in-ears?

A: For IEM systems you would want to use an antenna combiner, such as BH # SHPA421B (Depending on the model and frequency block of your transmitters).

Q: 4. Does this product come with BNC antenna cables or just the antennas?

A: Yes. see below: In the Box Shure UA844+SWB UHF Wideband Antenna Distribution System (470 to 960 MHz) PS45 Power Supply 4 x Locking DC Power Cables (for ULX4D, ULXP4) 4 x Non-Locking DC Power Cables (for QLXD4, SLX4, and BLX4R) 10 x 22" BNC Cables 2 x 6' BNC Cables 2 x Bulkhead Adapters Rackmount Hardware Kit Limited 2-Year Warranty 2 x Shure UA874 Active Directional Antenna 2-Year Limited Warranty

Q: 5. What is the widest sprap opening for this AL-4, or in other words what strap fits besides 10 mm?

A: The Peak Design AL-4 Anchor Links would accommodate a strap that is 12mm or below.

Q: 6. how to set up with wisycom mcr42s?

A: thank you for your question. please give us a call at 800.606.6969 so that we can better assist you/

Q: 7. The bottem of the connector strap opening for wider strap ? Like Nikon Z 800 mm /f6.3 lens will fit ? Thanks

A: The Peak Design AL-4 Anchor Links are compatible with the Nikon LN-3 strap for the Nikon NIKKOR Z 800mm f/6.3 VR S Lens.

Q: 8. How wide? Can I use 1" webbing or only 3/4"? What is the difference btw V3 and V4? How can I identify the diff on box?

A: Peak Design AL-4 Anchor Links housing has 2 holes. the smallest one is 1.2 x .32 cm, the largest is 32 x .32 cm. Therefore any webbing would fit through them. The V4 has a thick cord and the logo is only in one side compare to the V3 anchors.

Q: 9. Will the Peak AL 4 anchors work with Canon m5?

A: Yes it will

Q: 10. Can this system be battery powered for use in the field? For example on a cart?

A: no it will no work with Dc power so it would need to be plugged into an AC power source. if there isn't an AC source available in the field then it would not be possible to power this unit.

26/09/2024

[11 dB] Using this to power two separate mono signals (one not yet connected), for primary sound in the church sanctuary and secondary sound in classrooms and nursery. Plenty of power for the speaker (TOA 38-SD 8Ohm) makes the whole space sound great! Some specific features which are appreciated: separate gains for each channel allow full power of two outputs with disparate needs. Simple intuitive light indicators and power button. Automatic muting during warmup avoids the accidental pop when turning on the Amp, particularly useful for turning off the amp between uses and avoiding 24/7 power drain when not necessary.

5
22/09/2024

[45 W] No more RF noise!!

5
19/09/2024

[11 dB] Using with a set of 4 SLX receivers. Works great. Nice way to clean up the rack of unnecessary antennas and cables. Especially like that the latest models have a separate cascade connection for daisy chaining to additional units without using up one of the 4 receiver connections.

5
18/09/2024

[45 W] I use this amp to push an unpowered 18 inch sub. I run it in bridged mode and it can give that sub all it wants.

5
13/09/2024

[Aluminum] This unit solved all of our RF issues, and works perfectly!

5
13/08/2024

[45 W] Shure does make a quality product. No questions there. Works great and decrease clutter from multiple mics.

I must comment on B&H for their supplying needs. Outstanding. Looked like this product was going to take a while to deliver, however, I know they did their best to expedite the process. Received the product in a couple of days. I was shocked at the turn around from order to delivery!

5
08/08/2024

[Aluminum] This Amplifier works great. I installed it in a small church worship center for Front of House sound. For the money, you get a very nice amp. They are using it for 2x 15 inch 8 Ohm speakers.

5
06/08/2024

[45 W] I’ve been a staunch supporter of the sm series for years, and this is a great upgrade from the classic small body unit. The menu functionality is easy and faster than the old one, and the recorder function is awesome for super long or wide shots. Battery life is comparable to the old sm. Can’t wait to add more to my kit!

5
27/07/2024

[11 dB] Industry standard transmitter for remote location work. Paired with the 822 you probably won't need remote antennas.

5
27/06/2024

[Aluminum] Good clean sounding power amp

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Wideband 25w Microwave Amplifier 2300-2500 Mhz

$4,497.00 $5,486.34

25w Microwave Amplifier 2300-2400 Mhz | Rf-links

$5,397.00 $6,530.37

250w Microwave Amplifier 2400-2500 Mhz | Rf-links

$8,997.00 $14,305.23

Wideband 10w Microwave Amplifier 10 Mhz-6 Ghz

$12,897.00 $19,474.47

Wideband 5w Microwave Amplifier 10mhz-6ghz Rf-links

$11,997.00 $17,995.50

Wideband 1w Microwave Amplifier 2-6 Ghz | Rf-links

$8,997.00 $12,505.83

7w Wideband Amplifier 400-470 Mhz | Rf-links

$1,497.00 $2,320.35

Products You May Like

Fotodiox Pro Eggcrate Grid 24x24 Softbox

$74.85 $109.28

Pearstone 15' Bnc To Bnc Video Cable

$50.85 $77.80

Swarovski 5-30x50 Z6 Bt Riflescope 2nd Gen

$7,167.00 $9,747.12

Porta-trace Gagne 24x36" Led Light Box

$1,071.18 $1,510.36

Tiffen 4x5.65" Black Pro-mist Filter 1/2

$1,284.00 $1,617.84

Tiffen 72mm Pearlescent Filter

$161.16 $236.91

Litufoto F50r Rgb Led Light Panel

$357.00 $560.49