This 9.8' Gossen MAVOPROBE Extension Cord 9.8ftfeatures both male and female 5-pin Binder 711 series connectors to allow users to take MAVOPROBE measurements at an expanded maximum distance from the MAVOMASTER.

For MAVOPROBE and MAVOMASTER    Male and Female 711 Series Connectors    Expands Effective Use Distance

Related Questions and Answers

Q: 1. Does this meter come with a case?

A: Yes, the Gossen DigiPro F2 flash/ambient light meter V2 comes with a protective softcase.

Q: 2. How much is calibration? How often is it required?

A: Gossen recommends a calibration interval of 12 to 24 months, depending on the operating conditions of the measuring device. Unfortunately we do not offer any calibration services. The recalibration takes place in the GOSSEN light laboratory on a checked and monitored optical bench. You would need to contact Gossen directly for recalibration.

Q: 3. "Can it toggle back and forth between a shutter speed/aperture reading (let’s say, f/8 @ 1/60) and then to its EV equivalent (say, EV 12) (and then back to f/8 @ 1/60) or does changing the mode erase the existing reading?"

A: Yes you can

Q: 4. is there a provision for wireless connection to flashes ?

A: This meter can read strobe lights without connecting them directly with a PC cord with its noncord function but the meter can not wirelessly trigger flashes. If you need the meter to trigger the lights you will need to connect a sync cable to the side of the meter via the PC connection.

Q: 5. what material is this meter made of?

A: The body of the Gossen Digisix 2 Ambient Light Meter is made of a hard industrial plastic.

Q: 6. Is the screen easy to see in low light?

A: Yes, the LCD on the Gossen Digisix 2 Ambient Light Meter is easy to see in low light.

Q: 7. is user manual in english available?

A: The user manual that came with my Gossen Digisix 2 Light Meter is in English and German.

Q: 8. Can this light meter fire and measure the shutter and f stop of a studio flash without it being attached to the studio flash itself?

A: Flash readings can be taken with or without synchronizing cable. When used in conjunction with a synchronizing cable the flash is triggered by pressing the M button - the flash is automatically triggered and measured. When used without a cable, the meter will wait up to 45 seconds for you to trigger the flash yourself.

Q: 9. Can you tell me the difference between the Sixtomat F2 and the Digipro F2?

A: The, Sixtomat F2 is 118 mm x 65 mm x 19 mm / 4.65 x 2.56 x 0.75 inch and the Gossen DigiPro F2 Flash and Ambient Light Meter v2 is 150 mm x 65 mm x 19 mm 5.91 x 2.56 x 0.75 inch. The Sixtomat F2 is 95 g / 0.21 lbs without battery and the Digipro is 100 g / 0.22 lbs without battery. Other wise the are about the same.

Q: 10. Will this meter display percent of flash contribution?

A: Unfortunately, this meter would not display a percentage of flash.