Designed to connect to virtually any device, the satin black Audioengine A2+ Wireless Bluetooth Speaker with S6 Subwooferprovide an analog RCA stereo input, 1/8" input, and Bluetooth connectivity with aptX HD for wireless connectivity with your compatible devices. The speakers consist of a 2.75" woofer and a 0.75" tweeter and output up to 15W per channel RMS, or 30W per channel peak.

For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with the included speaker wire. The speakers are magnetically shielded, allowing for placement near your TV or other sensitive devices.

30W Total RMS / 60W Total Peak Power    Bluetooth Audio Streaming    S6 Subwoofer with 6" Long-Throw Woofer    S6 Subwoofer with 210W of Peak Power    2.75" Aramid Fiber Woofers    0.75" Silk-Dome Tweeters    USB, RCA, 3.5mm Audio Inputs    Stereo RCA Audio Output    65 Hz to 22 kHz Frequency Response    Integrated CSR8670 DAC

The A2+ Wireless speakers can connect to nearly any Bluetooth source, so you can wirelessly play your favorite apps like TIDAL, Spotify, Pandora, and more. The Bluetooth receiver built into the A2+ Wireless features aptX HD coding for enhanced quality with compatible devices. aptX HD is also backward-compatible with the SBC and AAC codecs, so you can enjoy audio from nearly any Bluetooth-enabled device. Further, the A2+ Wireless has a Bluetooth range of up to 100' with virtually no degradation in audio quality.

These speakers feature acoustic and electrical designs to help provide enhanced bass without using digital signal processing or bass boost circuits.

There's no network to set up or passwords to create; simply plug in or pair your source device and enjoy.

The cabinets, drivers, bass port designs, amplifiers, and crossovers are all tuned together to help create an efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.

With all the electronics built into the left speaker, it's easy to connect your source device of choice. All the circuit boards for the power and preamp sections are vertically mounted for augmented mechanical shock protection.

The A2+ Wireless speakers use ferrofluid-cooled, silk-dome tweeters with neodymium magnets. The tweeters are engineered to hold up well under high power, and the edge-driven design helps provide smooth response. The aramid-fiber woven-glass composite helps the woofers retain their shape when being driven at high levels.

Both of the A2+ Wireless speakers are magnetically shielded, so you can place them near your display or other sensitive devices.

• Integrated CSR8670 DAC
• Output current limiting, thermal over-temperature, and power on/off transient protection
• RCA and 1/8" inputs provide easy connection to nearly any audio source, including a turntable or TV
• Variable RCA output for subwoofer connection
• 0.75" thick MDF cabinets
• 1/4"-20 threaded brass inserts on the bottom enable attachment to floor stands or wall mounts

Related Questions and Answers

Q: 1. does this model version have flat feet?

A: The bottom of the legs are flat.

Q: 2. Can I play music off my iPhone?

A: Yes - you can plug them in directly through the headphone jack on your phone, or purchase a Bluetooth receiver.

Q: 3. Do these work with any of your wall mounts?

A: These active speakers are not designed for typical speaker wall mounts. These should work: Adjust the width of the mount with the telescoping base to fit nearly any speaker. Designed for any bookshelf speaker including speakers without threaded inserts or keyhole slots. Peerless-AV Bookshelf Speaker Mount (26 lb Capacity, 2-Pack BH #PESPK26 - https://bhpho.to/2RsxsjD

Q: 4. Looking to put 2 of these on a shelf on my TV stand. The shelf is 8" high x 4ft wide x 1ft deep. The Audio Engine A2+ at 6" high x 4" wide x 5.25" depth Does BHPHOTO sell a very short speaker stand that I could use to decouple the speaker from the shelf, but still have it fit within the 8" high shelf? ...trying to reduce vibrations going thru the other devices on the tv stand & space is limited. cheers

A: We offer the Audioengine DS1 Desktop Stand for Small Speakers for this compatibility.

Q: 5. What’s the power connection 220 or 110

A: The Audioengine A2+ Wireless Bluetooth Speaker System power input is 100 to 240 VAC, 50 / 60 Hz.

Q: 6. Do they support Bluetooth?

A: The Audioengine A5+ does not support bluetooth. If you want to use them with bluetooth connectivity, then you will need a bluetooth receiver to connect to them like B&H # AUB1

Q: 7. Does that 11.25 height measurement include the feet/spikes or not? If not, are they removable?

A: The actual height of the unit is almost 14 inches. You wouldn't want to take the feet off, since the speaker cone is in the bottom.

Q: 8. Is there a place to attach my record players ground wire on these speakers?

A: speakers do not require ground. All ground wires should be attached to the receiver

Q: 9. Does it include a UK 3-pin plug?

A: No. The Audioengine S6 6" 210W Subwoofer includes a North American AC Power Cord.

Q: 10. Does this speaker have an energy saver that delays the startup of sound? I hope not...

A: Don't know of any delay. No energy saver . We usually select music after units are turned on. Awesome speakers. Placement important for maximum enjoyment.