Increase your shooting comfort using the Flycam Flowline Master 2 Vest for Cameras & Gimbalsfrom FLYCAM. Compatible with video cameras and camcorder rigs weighing 8.8 to 26.5 lb, the Flowline system works by using a suspension line to support the weight of your rig, taking the load off your shoulder, neck, and arms and distributing it across your torso. The 60" tension line safely supports your camera rig using a locking hook and is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig.

The Flowline Master 2 system consists of the vest, a support bar, a nonslip ratchet knob, and a 13" top bar with a 5" extension. The vest is adjustable for hip/waist sizes ranging from 32 to 49" and includes a padded carrying bag.

Reduces Fatigue, Arm & Shoulder Strain    8.8 to 26.5 lb Load Capacity    13" Top Bar Plus 5" Extension    Spring-Loaded, Locking Camera Hook    39" Height, 60" Suspension Line    Vest Fits Variety of Body Sizes    32 to 49" Hip/Waist Belt Range    Padded Carrying Case

Related Questions and Answers

Q: 1. Is it possible to lock the support arm so that I wouldn't be moving?

A: On this device the hook may be locked at the end of the support arm.

Q: 2. what if I will use it with more weight (8kg or 9kg) than it supports? It's possible or what's the risks?

A: According the manufacturer the Flycam Basic Flowline Stabilizing Support Vest with 180° Rotation, should only be used with weight loads of up to 7.5 kg, for proper functionality. For more weight support, we recommend the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals: https://bhpho.to/3KYFQo5

Q: 3. Would this work on a Movi pro ?

A: Yes, the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals can clamp the FREEFLY MōVI Pro Essentials Bundle, but the arm length on the FLYCAM doesn't protrude enough to distance the gimbal from the body to make it that comfortable of an operating experience.

Q: 4. difference with this https://www.bhphotovideo.com/c/product/1483097-REG/flycam_flcm_fln_mstr_flowline_master_stabilizing_body.html the arm is more short?

A: Yes, the major difference is that this item, the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals (9-27 lb) (B&H# FLCMFLNMSTR3) has a 13" (33cm) top bar with a 5" (12.7cm) extension whereas the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals (B&H# FLCMFLNMSTR) has a 17" (43cm) top bar with a 5.5" (14cm) extension.

Q: 5. Is the height adjustable?

A: Yes, the height can go between 23.62 to 39.37".

Q: 6. Can this swivel side to side? And does it secure so nothing comes loose on the arm?

A: No this does NOT swivel side to side.

Q: 7. If you pull down camera to get a lower shot, shouldn't the "string" go back up when releasing weight? Or is it setting height and that's where it is? I know the Swedish Easy Rig the string/cable will go up and down.

A: Yes, The FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation cord is tensioned and will retract, and adjust to the level of your camera payload. The cord will retract as you raise your camera payload.

Q: 8. Is the placid arm already affixed to the vest & system. I'm asking so I wouldn't have to do it myself

A: The FLYCAM Flowline Starter Support Vest and Spring Arm is simple process to assemble and you would need to mount the Placid arm. Please see this manual for installation. https://bit.ly/3D9ONVV

Q: 9. Does it support RS 3 Pro with FX3?

A: Yes, the FLYCAM Flowline Steady Camera Support Vest can support a DJI RS3 Pro and Sony FX3.

Q: 10. Hi! is the placid arm included in this kit for 797? thanks!

A: Oh yes, the FLYCAM Flowline Starter Support Vest and Spring Arm for Camera and Gimbals (B&H# FLCMFLNPA01) comes with the FLYCAM Flowline Placid Two-Axis Spring Arm (B&H# FLCMFLNPLA) and also with the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation (B&H# FLBFLCMFLN01).