Acebil Cine Ob Heavy-Duty Aluminum Tripod With Case

Acebil Cine Ob Heavy-duty Aluminum Tripod With Case

Product Code: eq121206
Availability: In Stock

$11,550.00 $17,209.50

Qty

17 reviews Write a review

Description
Reviews (17)

The Acebil CINE OB Heavy-Duty Aluminum Tripod with Casefrom Acebil CINE OB Heavy-Duty Aluminum Tripod with Caseoffers a maximum load capacity of 198 lb and has a height adjustment range of 40.6 to 63.4" with a single stage. It comes with a mid-level spreader that holds the tripod legs in position, and it features a flat base for a flat fluid head. A TC-150 carry case is included to store and transport the tripod.

Aluminum Tripod Heavy Camera Rigs 40.6 to 63.4" Height Range Flat Base, Mid-Level Spreader 198 lb Payload Capacity Single Stage with Twist Locks Includes Carry Case

Key Specs
Head Mount Type	Flat Base
Primary Material	Aluminum
Load Capacity	198 lb / 89.8 kg
Maximum Working Height	63.34" / 1.61 m
Minimum Working Height	40.6" / 1 m
Closed Length	Not Specified by Manufacturer
Weight	35.6 lb / 16.1 kg
Legs
Head Mount Type	Flat Base
Primary Material	Aluminum
Leg Lock	Rotating Locking Lever
Leg Sections	2
Independent Leg Spread	Yes
General
Load Capacity	198 lb / 89.8 kg
Maximum Working Height	63.34" / 1.61 m
Minimum Working Height	40.6" / 1 m
Closed Length	Not Specified by Manufacturer
Bubble Level	Yes
Spreader Support	Mid-Level (Included)
Weight	35.6 lb / 16.1 kg

Related Questions and Answers

Q: 1. What are dimensions of internal long separator as in what width two compartments does it make?

A: The long internal divider would be the same width as the case, which is 40".

Q: 2. Will it work with this tripod FEISOL CT-3441T ?

A: One would need to attach Feisol short spikes to make the tripod usable with the dolly: https://bhpho.to/2FQufIF

Q: 3. Will this work with an FSB 8?

A: Yes, the SmallRig FreeBlazer Heavy-Duty Carbon Fiber Tripod (75mm Bowl) will work with the Sachtler FSB 8 Fluid Head.

Q: 4. Can I use this with the iFootage Wild Bull T5S with the spiked feet (rubber feet removed)?

A: Yes, the Acebil D3 Dolly for Professional Tripods is compatible with the iFootage Wild Bull T Series T5S Aluminum Alloy Tripod.

Q: 5. Will this case definitely fit Arri T1 1000w lights? Would you need to remove the barn doors and filter frame for it to fit?

A: The barndoors nor the filter frame would need to be removed in order to store an Arri T1 in this case.

Q: 6. Will this work with Miller Sprinter II Tripod?

A: The Acebil D3 Dolly should work. However, we can only recommend that you choose the Miller Dolly made for the Sprinter II tripod. Miller 391 Lightweight Dolly - for DS Tripods BH #MI391

Q: 7. What is the measurement of the screws?

A: The tripod plate on the Prompter People 3-Section Aluminum Heavy-Duty Tripod System (50 lb Capacity) comes with both 1/4"20 and 3/8"16 mounting screws.

Q: 8. I have a Panasonic HC-X920 camcorder. I was wondering if this zoom control handle can connect to the camera? All I see for 2.5 stereo jack connections are headphones and an external microphone. Will this tripod connect to this camera? If so, where does it connect? Thank you.

A: The tripod zoom handle has a cable with a jack at the end to plug into your camcorder.The Panasonic called out does not have this feature Remote input-port for this jack.Example is to look at a camera that has this remote-port, like the Canon G30 camcorder.I do make use of this handle in capturing soccer games where a lot of panning left-right movement occur.This is near a professional tripod, get a camcorder that mates with it...the handle works great when capturing lots of subjects in motion... good luck.

Q: 9. Does this case fit three https://a href= http://www.bhphotovideo.com/c/product/636421-REG/Manfrotto_1005BAC_3_1005BAC_3_Alu_Ranker_Light.html target= _blank www.bhphotovideo.com/c/product/636421-REG/Manfrotto_1005BAC_3_1005BAC_3_Alu_Ranker_Light.html/a kit?

A: If you removed the studs on each of the 1005BAC stand, then you can fit three of them stacked together in this Arri case.

Q: 10. And it only weighs 9.7 pounds?

A: Yes, the SmallRig AD-80 FreeBlazer Heavy-Duty Aluminum Tripod System (BH #SM4163) only weighs 9.66 lb / 4.38 kg.

Adam	27/09/2024
[Flat Base] Works well with our Sachtler V18 and Miller Arrow 50 tripods; very smooth and way better than picking it up to carry it everytime! 5

Larry	16/09/2024
[Flat Base] These wheels are built like a tank. I feel confident loading up my tripod with a heavier camera setup along with accessories attached. I've purchased and used many cheaper and lighter wheels for tripods, I should've got this one a long time ago. It seems like it's built to last. 5

anyonymous	06/09/2024
[Flat Base] Good and heavy duty. Smooth and quiet! 5

DAN	23/08/2024
[Aluminum] My fault, but I did think it would be lighter than the metal version, which if it is, it is negligible. 5

Anonymous	13/08/2024
[Flat Base] I USED IN MY CHURCH 5

Jenny	04/08/2024
[2] I had originally bought this tripod for my kid, but after unpacking it and using it once – he can keep my old tripod. Steady and rock solid, fluid – I can not recommend this tripod more. 5

Stephen	27/07/2024
[Yes] When my original spreader broke because they were plastic, I looked at this heavy duty spreader for my tripod. Wow, when they came it, they fit perfectly and are definitely heavy duty! 5

EDDY THE PHLEGMATIC	26/07/2024
[Aluminum] Always steady and getting shots to the perfection. 5

Alexander	18/07/2024
[Flat Base] Got this as an upgrade to my existing tripods and it's a great value. Rock solid, easy balancing, fluid leg extensions. 5

Mark	11/07/2024
[Yes] Great tripod with single level to lock/unlock the legs (one for each leg). I'm using this tripod with SmallRig DH-01 Fluid Head (purchased from B&H). Total value is around $250 for carbon fiber video tripod and fluid head! It's better value than my Manfrotto carbon fiber camera tripod with no ball head. Tripod is big and tall. It reaches very high. I'm 6'1 and feels like this one goes up to 7ft tall (well, maybe less). The center bowl works well with the fluid head. Light, but sturdy/heavy duty. Sometimes, you have to adjust the feet (to unfold), but it works fine as stabilizing the tripod. Comes with a tripod bag with shoulder strap. I have many SmallRig products, and so far, they are all in good quality. This tripod and fluid head are no exception with excellent value! 5