Kanto Dts1000 Adjustable Monitor Stand For 17-32" Displays

Product Code: eq121377
Availability: In Stock

$179.97 $232.16

Qty

17 reviews Write a review

Description
Reviews (17)

Enjoy ease of use and improved ergonomics with the Kanto Living DTS1000 Height-Adjustable Desktop Monitor Stand. The DTS1000 is designed for easy deployment and adjustment. It uses a detachable monitor plate to simplify mounting displays up to 32" in diagonal to the sturdy base. The tilt mechanism provides +20 to -50° of adjustment and the mount can swivel up to 30° left or right. Along with the ability to adjust the height from 12.6 to 19.7", the DTS1000 will help you find your perfect monitor position. Rotation is also available to easily switch from landscape to portrait orientation and a cable management clip helps keep wires neat and out of the way.

Supports 17 to 32" Displays 75 x 75 to 100 x 100mm VESA Mount Supports up to 17.6 lb Height Adjustable from 12.6 to 19.7" +20° to -50° Tilt 360° Monitor Rotation ±30° of Swivel Adjustment Cable Management Clip

Parameters
Compatible Models	Displays 17 to 32"
Mounting-Hole Pattern	75 x 75 to 100 x 100 mm
Load Capacity	17.6 lb / 8 kg
Adjustments	Rotation: 360° (-180 to 180°) Swivel: 60° (-30 to 30°) Tilt: 70° (20 to 50°) Height: 12.6 to 19.7" / 32 to 50 cm
Orientation	Landscape, Portrait
Material of Construction	Steel, Aluminum
Dimensions	19.7 x 12.6 x 7.9" / 50 x 32 x 20 cm
Weight	9.5 lb / 4.3 kg
Packaging Info
Package Weight	11.165 lb
Box Dimensions (LxWxH)	17.2 x 10.5 x 4.5"

The height adjustable column clicks into place while raising your monitor to eye level for easy on-the-fly adjustments to improve ergonomics.

The DTS1000 features tilt and swiveling to place your monitor in the most comfortable position and reduce glare. 360° monitor rotation allows you to rotate your monitor from landscape to portrait easily.

A thick steel base holds your monitor securely in place even while adjusting your monitors height, protecting your investment and giving you peace of mind.

A detachable monitor plate allows for easy setup and takedown, saving you time and frustration.

Easily route cables and achieve a clean setup with the included cable guide that attaches to the column.

Related Questions and Answers

Q: 1. is the nonslip padding optional or does it already come applied?

A: The Auray SMS-10C Adjustable Clamp-On Desktop Studio Monitor Stands come with four nonslip EVA pads inside of the package which the user can apply as desired or leave off.

Q: 2. Would my MSI monitor be too heavy for the arm? It weighs in at 19.215lb. BH #MSSAMSG274R2 MFR #OPTIXMAG274R2

A: The Gabor Levitouch Dual-Arm Desktop Monitor Mount for Two 17 to 32" Displays BH #GADM552 holds displays up to 19.8 lbs. each. The MSI Optix MAG274R2 27" 16:9 G-SYNC 165 Hz HDR IPS Gaming Monitor B&H # MSSAMSG274R2 weighs 13.34 lbs.

Q: 3. Can this hold 2 "ASUS ProArt Display PA278QV" in portrait mode?

A: The Mount-It! Dual-Monitor Desktop Stand for Two 13 to 27" Displays BH #MOMI1781 will hold the ASUS ProArt Display PA278QV 27" 16:9 Adaptive-Sync IPS Monitor BH #ASPA278QV • MFR #PA278QV in portrait mode.

Q: 4. Would the new Apple 27" display work in portrait mode on this stand?

A: Yes. The Gabor Mainmast DMS-200 Desktop Monitor Stand for 17 to 32" Displays BH #GADMS200 is compatible ith the included VEA adapter for the new Apple 27" Studio Display (Standard Glass, VESA Mount Adapter) BH #APMMYQ3LLA .

Q: 5. What is the minimum clamp depth required? My desk only has 1.5" of depth and I can't tell if that's enough. Thanks!

A: The Auray SMS-10CL Adjustable Clamp-On Desktop Studio Monitor Stand does not specify a minimum width/depth that its clamps can be mounted to, but based on the images provided that show the length of the tightening screws, this stand should be capable of mounting to thin surfaces as small as roughly half an inch. The SMS-10CL should have no issue mounting to a desk of 1.5" thickness.

Q: 6. Will this fit an Eizo CG211?

A: The Gabor Mainmast DMS-200 Desktop Monitor Stand for 17 to 32" Displays BH #GADMS200 will fit the EIZO ColorEdge CG211 21.3" LCD Display via its VESA compliant mounting hole spacing.

Q: 7. Where are these manufactured?

A: Unfortunately I cannot answer this question without looking at the underside of the base to see if there is a manufacture sticker or plate. The only sticker visible is for model and weight limitation.

Q: 8. Will this work with 34" LG monitors (not curved)?

A: Yes it will. Be sure to check the monitor's VESA pattern: Supports 32 to 60" Displays Up to 60 lb 100 x 100 to 600 x 400mm Mount Patterns

Q: 9. How much weight per monitor can this mount handle?

A: The Mount-It! MI-4753B holds three display screens from 17" to 27" with maximum weight of 15.4 pounds per arm, and is compatible with 75x75mm and 100x100mm Arms are adjustable and can be tilted at 45 degrees or swiveled at 180 degrees to find your ideal viewing location Cable management included to hide unwanted cables

Q: 10. I have a one inch lip on my desk top. Is this one inch enough material for the clamp to attach to?

A: No, the Gabor Levitouch Dual-Arm Desktop Monitor Mount for Two 17 to 32" Displays (B&H # GADM552) should ideally have 2" of horizontal distance to clamp from the side of a desk.

anyonymous	21/09/2024
[11.165 lb] Worked on my 34" LG ultrawide. Just tighten the heck out of things. 5

Isaac	16/09/2024
[11.165 lb] Mounted a 43 TV and it was very easy to install. The plug didn't fit since its to close to the wall so I put a extension wire with a flat plug and it worked perfectly 5

Neil	16/09/2024
[11.165 lb] Sturdy, stable, fully articulating, easy to assemble and aesthetically appealing. 5

Patrice	22/08/2024
[Steel, Aluminum] great monitor arm - mount - using with 32 and 27 - perfect - don't need anything more sophisticated or expensive 5

Elizabeth	18/08/2024
[11.165 lb] Setup in minutes. Arms move in every direction (except behind the mount), while retaining a sturdy feel to support our 22lb, 27-inch LG monitor. The cable keeper is a nice feature, but our existing cables were almost too short to use. 5

Gerald	15/08/2024
[Steel, Aluminum] Worked perfect to flat wall mount my Q70 SERIES 85 4K UHD SMART QLED TV. Very sturdy installation being able to fasten to 2 sets of wall studs. TV off and on is very easy. 5

anyonymous	28/06/2024
[Steel, Aluminum] I was looking for a freestanding VESA stand for our new EIZO ColorEdge 27 4K display. The EIZO panel is fantastic, but the supplied base is plasticky and the round shape of the base did not go well with our desk theme. We searched online and did not find too many options that interested us. Among all the items listed this one - Gabor Mainmast DMS-200 - looked the most promising. Happy to say that it exceeded expectations right at the time of unboxing. Packaged well with all tools and accessories supplied, with clear instructions. The build quality is a noticeable improvement over the stock EIZO base... an optimal combination of metal and plastic with metal being the dominant material. The design is sleek and the height adjustment lever is a clever design. Does not wobble much during adjustment of tilt angle. Rotation is smooth along both axes. I like the fact the they restricted the left to right rotation within certain angles... that makes sure you will not accidentally hit the wall if the monitor is placed close to a wall (like ours is). The cable organizer hole is neat and as you can see in the photo - extremely effective at hiding all cables. At first we thought it would be better to not have the logo and make/model printed on the base, but we found it is tastefully done and we do not mind it much. They may still want to consider making it a removable sticker like auto decals. Overall, very impressed and totally happy with the purchase. A high-end panel like EIZO deserves a base like this. 5

Diane	02/06/2024
[11.165 lb] I highly recommend this affordable sturdy VESA mount, esp. for the Apple Studio Display. The footprint is more behind the front of the display and it reaches 1 lower than the height-adjustable Apple Studio Display as I have both to compare. Pulling the bar (at the back with yellow sticker in photo) towards the monitor to make height adjustments is convenient enough because I make height adjustments not more than a few times a day. Big savings. 5