Send 4K HDR signals to multiple destinations up to 330' away with this 4-Output Extended Distance 4K HDR HDMI to HDBaseT Distribution Amplifier from Atlona. The high dynamic range (HDR) distribution amplifier features one HDMI input and four HDBaseT outputs that can transmit DCI 4K60 video with 4:4:4 chroma sampling, multichannel audio, power, and control signals up to 330' over a single Cat 6/6A/7 cable. It integrates seamlessly in commercial AV distribution applications and boasts support for HDMI pass-through to external monitors, audio de-embedding to a balanced output, EDID management, HDCP 2.2, CEC display control, RS-232 and IR control extension, remote power for receivers, and HDBaseT link testing.

High dynamic range format support includes HDR10, HLG, and Dolby Vision, and multichannel audio pass-through is also supported. The unit works with TCP/IP or RS-232 control systems with bidirectional RS-232 and IR and is housed in a low-profile enclosure with an external universal power supply.

Extends DCI 4K60 4:4:4 up to 330'    Supports HDR10, HLG, and Dolby Vision    Bidirectional RS-232 and IR Control    Audio Deembedding to Balanced Output    Pass-Through HDMI Output to Monitor    Multichannel Audio Pass-Through    Compliant with HDCP 2.2

• Pass-through HDMI output to support local monitor
• DCI 4K capability at 60 fps with 4:4:4 chroma sampling
• Supports HDR10, HLG, and Dolby Vision HDR formats
• Visually lossless compression with no latency to enable HDR and 4K/60 video signal extension over HDBaseT
• HDBaseT outputs extend HDMI, control signals, and power up to 130' for 4K HDR or 230' for 1080p with Cat 6/6A/7
• Bidirectional RS-232 and IR control extension for each output
• Remotely powers compatible receivers over HDBaseT
• CEC display control sends display power on/off commands over HDBaseT using the power button, IP, or RS-232
• Audio de-embedding to balanced analog output with volume control for integration with a separate audio system
• HDBaseT link test verifies cable, termination, and link quality for more reliable installations
• Multichannel audio pass-through
• Cascade up to eight units to expand the system without compromising performance
• Compliant with HDCP 2.2
• Manages EDID communications with the source through a display’s EDID or internally stored EDID
• Intuitive GUI-based configuration using integrated web server
• Flexible control options via TCP/IP, RS-232, and IR with Atlona Velocity or third-party control systems
• Easy to configure and manage with AMS (Atlona Management System)
• The front panel includes LEDs for power, HDBaseT link, and HDMI signal status as well as power and EDID control buttons
• Compatible with HDR-EX-100CEA-RX, as well as AT-UHD-EX
• Low-profile enclosure for easy installation under a table or in furniture

Related Questions and Answers

Q: 1. Hi. Just wondering if this can simultaneously have a v mount plate and a VESA plate attached for a stand? Can you run it off of a v mount battery and attach it to a stand via VESA at the same time, or do you have to pick one or the other?

A: In order to use a VESA plate, the V mount battery module must be removed. You can power the monitor by v-mount battery with a 12v 4-pin XLR to d-tap cable.

Q: 2. Can you have source 1 routed to output 1-4 and source 2 routed to output 5-8?

A: No the BZBGEAR 2x8 UHD 4K Splitter/Distribution Amplifier with CEC Turn On/Off TV will not be able to perform Matrix switcher functions. A 8x8 Matrix switcher listed below will be able to fill your needs for routing. BZBGEAR 8x8 4K UHD 18 Gb/s HDMI Matrix with Audio Extractor & ARC BH #BZUHD88M • MFR #BG-UHD-88M

Q: 3. Is there any latency in the video signal when used in a live production?

A: The latency on this camera should be extremely low, possibly unnoticeable. It would integrate very well with other cameras for live production.

Q: 4. What is the reason for two power inputs?

A: The AVMATRIX SD1151-12G 12G-SDI 1x5 Reclocking Distribution Amplifier has two power inputs for power back up redundancy.

Q: 5. When switching is there a delay on the output while it re-syncs? Or is it seamless and instantaneous?

A: Never mind. This unit doesn't switch. Duh.

Q: 6. Approximately how many hours will it run using a V-Mount 160watt Battery?

A: The Elvid StudioVision 4K HDMI Monitor with HDR should last almost two hours with a 98Wh battery.

Q: 7. How do you assign custom functions to the function keys?

A: As noted in the manual, under page 9: https://bit.ly/2Vojsx3 To reassign menus to the function buttons, follow these steps: 1. Press and hold the function button until the function select menu appears on-screen. 2. Use the navigation buttons to select the desired function, and press menu to set the change and return to the main view. Press Exit before you accept the change with the Menu button will cancel the action and revert to the previous setting.

Q: 8. Is this monitor's color reproduction good enough to grade on? Looks like it could be a good mobile solution for this..?

A: no it is NOT this is not a reference level monitor and would not be suitable for colour grading

Q: 9. is this can directly push the HDBaseT Interface video directly into a server?

A: Not that we are aware of. HDBaseT is a system that allows for sending an HDMI signal over Cat6 cables for the purpose of allowing longer distances than typically available though a standard HDMI cable. It is not an IP format which you'd connect to a network directly. For that you may want to look at the PTZOptics PVTL-ZCAM 2.07MP 3G-SDI Box Camera with 4x Zoom Lens, B&H # PTVLZCAM instead. https://bhpho.to/2GIZNhP

Q: 10. Does this monitor have any ability to tilt within the frame?

A: The Elvid StudioVision 4K HDMI Monitor with HDR is fixed in the case.