Vicoustic Vicspacer Matte Gray 4-Pack

Vicoustic Vicspacer Matte Gray 4-pack

Product Code: eq121602
Availability: In Stock

$2,667.00 $3,520.44

Qty

7 reviews Write a review

Description
Reviews (7)

This 4-pack of matte gray Vicoustic VicSpacer Matte Gray 4-Packis a fixation system for Flat Panel VMT. By spacing the panel 1.57" away from the walls or ceiling, VicSpacer helps to enhance the Flat Panel VMT's acoustic performance in the mid- and low-frequency regions. The new fixation system used by VicSpacer makes Flat Panel VMT compatible with the VicFix fixation system, either the VicFix Mini or the J Profile System, already being used on other Vicoustic solutions.

VicSpacer can be installed in the ceiling (using VicFix J Profile 2m) and used as bass trap by placing it in the corners (using VicFix Corner and VicFix J Profile 80mm). It can also be screwed to the ceiling or to the wall. Made from wood and lacquered steel, it was designed to cover the white sides of Flat Panel VMT in a stylish and visually appealing way.

Acoustic Treatment Fixation System

Parameters
Quantity	4
Color	Matte Gray
Dimensions (W x H)	47.0 x 23.6" / 119.4 x 59.9 cm
Depth	2.6" / 66 mm
Fire Rated	No

VicSpacer will need to be combined with Flat Panel VMT of 20mm thickness (not included).

Related Questions and Answers

Q: 1. will this work with my Epson 9900?

A: Yes it is compatible. You may want to create a custom ICC profile for the paper/printer combination for better color accuracy.

Q: 2. Will this paper work in my Z3200 designjet printer?

A: Yes, the HP Everyday Adhesive Matte Polypropylene (24 x 75' Roll, 2-Pack) works great with the HP Designjet Z3200PS Photo Printer

Q: 3. Is a print on matte polypropylene considered a art and archival quality giclee print?

A: Based on the information I have read, I would say it would not be. Check out The beginner's guide to giclee printing by googling it. It would not allow me to include the link

Q: 4. How aggressive is the adhesive? Would this media be suitable for decals/stickers? Need something that can be removed from hard surfaces (plastics, metals, glass, auto paint, etc...) without damage or too much residue.I'll be printing with an old DesignJet 750C+ and a Canon imageProGraf Pro-2000. Also, hope to cut with a cheap Chinese plotter/cutter converted to use opensource controller and firmware.

A: It is pretty aggressive. I would not count on it being easily removable.

Q: 5. What is the diameter of the microphone clip?

A: About 2 inches.

Q: 6. I was under the impression that this pack came with headphones. Is it supposed to?

A: It used to, but it's now only in the complete recording pack.

Q: 7. Does this work with usb-c if I have a usb-a to usb-c cable?

A: Using the included cable, into a USB A-to C adapter, this mic should work into a the computer.

Q: 8. Hello! With this microphone amplifier, will I still need phantom power to connect a condenser microphone to a camera like the Sony A7SIII, or a recorder like the Atomos Ninja V? If so, what do you recommend?

A: This amplifier is designed to work with the Shoeps MK series capsules, and will still require phantom power to run.

Q: 9. Whas the print yield?

A: Unfortunately it gives very limited amount of prints due to the ink cartridge uses up after 30 prints so you stay with lots of paper but it makes beautiful prints

Q: 10. how long is the xlr/usb cables included with this product?

A: USB is approximately 7 ft. and XLR is approximately 10 ft.

Robert	25/09/2024
[4] I'm using this mic to not over to provide voice-over commentary for a documentary that I'm working on, but also for Zoom meetings. Together, with the absolutely tiny stand (Schoeps TCg Miniature Table Stand), the mic is a discrete 'boom' mic that disappears on the desktop and avoids extraneous room sounds. While expensive, the quality and size are unbeatable. And if you're already using the mic for its typical use, it can now dual-purpose as a very high quality desktop mic using the Schoeps TCg stand. 5

Mehdi	14/09/2024
[Matte Gray] i love it 5

Daniel	11/08/2024
[Matte Gray] Solid clips, does what it needs to do 5

Edward	09/08/2024
[4] MK22 cartridges are halfway between the MK21 Wide Cardioid and the MK4 Cardioid - fairly directional but with extended base response. I frequently record in highly reverberant venues, such as cathedrals. Used as space microphones, the MK22 gives a clear sound with good stereo image, and a good balance with ambience. I plan to use them on a 1 meter stereo in ORTF configuration, with a pair of spaced MK22 microphones. Omnis tend to be muddy in this application and cards lose the warmth I seek. The MK22s will form the core sound - everything else is just for emphasis. MK22s are also effective for chamber music, often in conjunction with a pair of MK2H (far field) Omnis. 5

Jasmine	07/07/2024
[4] I received my backdrop quickly and it was perfect for my Halloween pictures! 5

Ahn	03/07/2024
[Matte Gray] I use a pair of these for my MS setup(cmc1’s, mk8, mk22). When these were released in 2019 it was welcomed with open arms. I went from a 13” to 6.7” Rycote windshield. Amazing! Size and weight is a big deal for me as I hike to my locations and I carry the mentioned MS setup plus an ORTF(2 ccm4’s). They perform excellent as expected and they draw less battery power than the CMC6. I had no reason to not own a pair. 5

Barry	14/06/2024
[Matte Gray] While it took 11 weeks for them to arrive (due to Covid), I am very pleased to have this matched pair. They are great as a main pickup or for spot mic'ing. When neither a cardioid or an omni capsule will do, this is the perfect choice. 5