Enhance your business by supporting Wi-Fi 6 access points, advanced IP security cameras, VoIP phones, and other power-over-Ethernet devices with the Netgear MS108EUP 8-Port PoE+ / PoE++ Compliant 2.5G Managed Network Switch. Designed for strong performance and easy management, this switch features eight 2.5G Ethernet ports, four of which support 30W PoE+ power while the other four can operate 60W PoE++ compatible devices with a total power budget of 230W. The easy-to-use web-based interface allows you to manage PoE prioritization, scheduling, per-port power limits and more. At the same time, the 40 Gb/s non-blocking switching capacity helps to ensure smooth performance for multimedia broadcasts and other high-bandwidth applications.

4 x 2.5G Ethernet PoE+ Ports (30W)    4 x 2.5G Ethernet PoE++ Ports (60W)    40 Gb/s Switching Capacity    230W Power Budget    Desktop & Wall Mountable    Silent, Fanless Design    Web-Based Management

Place the MS108EUP network switch on a desktop or mount it onto a wall with the included kit.

The all-metal, fanless design efficiently dissipates heat without disrupting your environment.

Manage PoE prioritization, scheduling, power limit per port, and more for simple control over all PoE-powered devices.

Simply plug the MS108EUP and configure it using the web-based interface.

Maximize your bandwidth with compatible devices by combining up to four ports, with a maximum of four link aggregation groups.

Related Questions and Answers

Q: 1. Pardon my ignorance but I'm not an IT guy. I am purchasing three Sony PTZ cameras that will power with POE. Normally you would look all three via cat 5 but there are many times when the distance of all three combined would be over 100m which is the typical max length of POE from what I gather. If I take the control cable from the PTZ cameras into this box, cam I simultaneously feed 3 cat 5 POE to each camera 100M each? Or is this strictly a switched output rather than using it as a splitter.

A: I would recommend using a Ubiquiti Networks 50V PoE Adapter with Gigabit LAN Port at each desired end location. Injecting power at the site of the PTZ camera at a closer point dropping the distance limitations.

Q: 2. If a 10Gbit Ethernet port is connected the to input of this device will the POE port be limited to 1Gbit or is 2.5Gbit possible?

A: Yes, If you used the Ubiquiti Networks 50V PoE Adapter with Gigabit LAN Port on a 10Gbit network the speeds would drop to gigabit speeds.

Q: 3. Does the us-16-xg come with ears for rack mounting?

A: The mounting brackets are included.

Q: 4. Does this support VLAN?

A: Yes, the Ubiquiti UISP-R supports VLAN.

Q: 5. is PoE adapter the same as PoE injector?

A: Yes, this device is a POE injector. It can be used to power cameras.

Q: 6. Will this work with a Panasonic AW-HE40SW HD PTZ Camera?

A: Yes it would, but look at the power standards not necessarily voltage. Regular PoE is the 802.3af standard, and PoE+ (plus) is the 802.3at standard. The main difference between the 802.3af (PoE) and 802.3at (PoE+) standards is the maximum amount of power they provide over Cat5 cabling. The maximum amount of power for the 802.3af (PoE) standard is 15.4 watts. The maximum for the 802.3at (PoE+) standard is 25.5 watts. Ubiquity mixes PoE equipment standards with 12V, 24V, 48V and 50V PoE adapters but most PoE equipment is 48V PoE or PoE+. Usually you only need higher voltages to reach longer distance's. Sometimes it is hard to get PoE+ to reliably work over 100M or 300ft, so you would need a PoE injector with slightly higher voltage to deliver 25W at 300 plus feet.For the record, the Panasonic camera does not need GB speed which uses all 8 conductors. 100mb over 2 pairs CAT5 or CAT5E (using only 4 of 8 conductors) will work fine. I'd stick with a 100mb PoE+ injector.

Q: 7. Will this work with Avaya IP desk phones?

A: That would depend on the model of the Avaya Phone.

Q: 8. Is this the right POE adapter for the Reolink RLC-410?

A: Robert is correct. No, this will not work. This is a 24VDC passive POE adapter. Reolink cameras require a IEEE 802.3af or IEEE 802.3at (48VDC) active POE injector. Consider this one: TP-Link TL-POE150S Power Over Ethernet Injector B&H # TPTLPOE150S: https://bhpho.to/3qW24K1 IEEE 802.3, 3u, 3af Compliant 1 x 10/100/1000M LAN Port 1 x Power Socket (DC IN) 1 x 10/100/1000M PoE Port Power LED Indicator

Q: 9. So in essence, with the right breakout cables (QSFP28 to 4 x SFP28) the switch can support 24 (4x4 + 8) SFP28 ports?

A: The QNAP QSW-M7308R-4X 12-Port 100G QSFP28 / 25G SFP28 Managed Network Switch, B&H # QNQSWM7308R4, does not support breakout cables.

Q: 10. Will this work to provide extra power to the Ubiquiti Switch Flex?

A: The Ubiquiti Networks 50V PoE Adapter with Gigabit LAN Port BH #UBPOE5060W will power a Ubiquiti Switch Flex.