Compatible with most fluorescent 54 and 55W ballasts, the Videssence LED 55W Biax Lamp Replacementreplaces the 55W/56K studio line-type fluorescent lamps.

4-Pin 2GII Base    Color Temperature: 5600K    Dimmable    Extruded Aluminum Heat Sink    Frosted Lens    Life Span: 50,000 Hours    CE Listed

Related Questions and Answers

Q: 1. What is Watt-equiv output of this pair of lights? Specs say 3.4W (I assume per lamp). At typ conv ratio of 3.8, that's only 26 W-eq for the pair! That's feeble, even for intended use on videochat. What am I missing?

A: Unfortunately, the manufacturer does not publish a watt equivalent rating for these lights. The only measurement they offer is a foot candle rating of 22 at a distance of 18 inches from the subject.

Q: 2. My prints are 17 x 23 inches. Will a single light give consistent coverage or do I need two lights to cover an area that size?

A: A single light will give you consistent coverage.

Q: 3. Why is the light intensity listed in the specs as 1,990 lux for both the 50w and the 30w units?

A: It is an error but it comes from Savage. An estimate is the 30w version is about half of the 50w. A good estimate is about 1000 Lux for the 30w and 1990 lux on the 50w.

Q: 4. Will it fit into the impact 10 inch reflector?

A: Unfortunately, this LED lamp is too wide to fit the opening on a Impact socket with a 10 reflector attached.

Q: 5. What is the voltage?

A: Atlas Sound does not provide this specification, but this LED lamp works from the XLR phantom power output so it is 48 V or less.

Q: 6. Since the "Overview" and "Specs" tabs are grayed out, is this the updated model with Thread capability?

A: The Eve Flare Portable Smart LED Lamp BH #EVFLARE is the latest model. For thread compatibility you will need an Apple HomePod (2nd gen), HomePod mini or Apple TV 4K (2nd gen, 3rd gen 128 GB).

Q: 7. What socket size does this fit?

A: This lamp would fit most Edison base sockets which do not use a reflector around them. An example of such is the Smith-Victor 100UL Cordset and Socket with Clamp Mount B&H # SM100UL. Please see the image below for reference.

Q: 8. Is there a way to turn on / off power without having to reach the button? Ideally, I'd like it to always be on and I can power with a power strip

A: You can use a power strip with a inline switch to turn it on and off.

Q: 9. Does this fuse work well on a dynolight Uni400?

A: Not sure it will or not, due to that light being a flash and the fuse is for a constant light.

Q: 10. dose it fit in the octacool 6 and 9?

A: No, the circumference is too wide. The bulbs that work are about 2.76 inches and the LED bulb is 3.5 inches.