The Bescor BLX-1 Dummy Battery Charger Kitby Bescor BLX-1 Dummy Battery Charger Kithas batteries and chargers made to work with the Olympus OM-1 camera and future cameras that will utilize these items. This kit includes one unregulated BLX-1 Olympus-style dummy battery, one AC wall adapter to dummy battery adapter, one BLX-1 USB-C internally regulated dummy battery for use with USB-C power sources, and one BLX-1 battery and charger.

Made for the Olympus OM-1    BLX-1 Dummy Battery    AC Wall Adapter to Dummy Battery Adapter    BLX-1 USB-C Dummy Battery    BLX-1 Battery    BLX-1 Battery Charger

• Voltage: 7.2V
• Capacity: 2250mAh / 14.4Wh

Related Questions and Answers

Q: 1. will it work with the new black magic URSA??

A: I bought this to light a custom made LED light. So I don't know about Black Magic camera. I do know it comes with 4pin XLR OUT, and it is rated at 12V. Don't know the power consumption rate of Black Magic. It may not last too long.

Q: 2. will it work with black magic cameras?

A: Yes it will work on the Black Magic Production camera as the camera has got a 12-30 V DC input. However you will have to change the XLR power plug on the battery pack, as the Production cameras DC-input is not an XLR input socket.

Q: 3. Can this be powered with a D Tap?

A: No, there is no D-Tap adaptation for the Bescor Nikon EN-EL18-Style Dummy Battery with Cord or the Nikon Z9 Mirrorless Camera.

Q: 4. Can i get just the dummy battery part to use to power an original (not the 4K) BMPCC?

A: Hello, at this time the dummy battery alone is not available separately. Sorry!

Q: 5. I wanted to ask if there is a connector that can convert the female pin/outlet from a 4-pin to a D-pin of barrel pin so that it can be connected to Battery Adapter instead of direct AC. I have looked around and failed to get a connector. Also what is the actual name of the outlet female 4-pin ?

A: The Bescor EP5 Dummy Battery for Select Nikon Cameras is designed specifically for use with the Nikon EH5 AC adapter. There is not an option to change the plug on the above dummy battery cable. The LanParte E15 Battery Dummy Pack is an option that has a female DC barrel connector,

Q: 6. will this power and fint the 12v connection for the Blackmagic Video Assist 4K?

A: This battery solution can provide 12 volts which the Video Assist 4K can run off. The power plug is unfortunately not compatible with the Video Assist 4K. The Video Assist 4K uses a 2.5mm barrel port and this power cable can be considered to make the connection from the battery to the Video Assist 4k. Bescor XLR Male to 2.5mm Barrel Plug B&H # BEXLRM25PP MFR # XLRM25PP. https://bhpho.to/36GROMH

Q: 7. Can I use this dummy battery for original BMPCC(not the 4K) ?

A: While we are not aware of a specific test done between the two it should work. The original Pocket Cinema Camera uses EN-EL20 style batteries.

Q: 8. Is this battery the same as Bescor 14.8V Lithium-Ion Portable Battery B&H # BEVM98 MFR # VM98 listed here:? https://www.bhphotovideo.com/c/product/1240074-REG/bescor_vm98_14_8v_lithium_ion_portable_battery.html

A: The power and connector ore the same. BEBCSBMEPIC does not have e V-Mount. BEVM98 does.

Q: 9. Is this compatible with the Lowell idLight?

A: I found that the battery pack was not able to run my 100 watt halogen camera light at its maximum brightness, but was able to run it at about 60% of its brightness. This battery pack is very light and small, compared to my old lead acid battery pack that was very heavy and cumbersome. I would highly recommend this battery pack for operating a 50 watt halogen camera light.

Q: 10. how long does a full charge last?

A: The battery is 98 watt hours. Divide the number of watts you are powering into that to determine the run time.