The Kendall Howard 18 RU Linier Wall Mount Cabinet Vented Doorprovides stability and durability for your valuable server and network equipment. The feature rich design gives you a universal enclosure, suitable for use in a variety of applications. The vented door can be removed or reversed to be left or right mounted to accommodate your particular installation. The vented door allows for ventilation for your network system.

Includes One Locking Vented Door    Locking Side Panels    22.5" Mounting Depth, 19" EIA Compliant    250 lb Load Capacity

The locking feature provides additional security for all three access points to keep your valuable rackmounted equipment safe from unauthorized use.

The included set of cage nut style rails fully adjust in 1" increments to accommodate the various depths of equipment on the market. Additional rails are available for devices that require 4-point mounting.

Easy to remove side panels provide more access for growing or changing cabling schemes as well as offer the option for increased air flow to prevent equipment from overheating.

Strategically placed laser knockouts provide a plethora of locations to feed copper or fiber optic cabling into the cabinet, or to install an optional fan kit for temperature control.

The vented door can be removed or reversed to be left or right mounted to accommodate your particular installation. The vented door allows for ventilation for your network system.

Related Questions and Answers

Q: 1. Will this work with any intercom system?

A: It will not work with any system. The Telex MCP90 is a gooseneck electret condenser microphone, designed for front panel connection to that company's RTS system and select Audiocom intercom stations.

Q: 2. What is the weight capacity on these?

A: 80 lbs

Q: 3. Does it scratch the car door when mounted outside the window?

A: I suppose the metal lower section could scratch the door..if left installed and you drove another hour over gravel roads. The device is designed to be installed on the inside of a door. IF you decided it was best used on the outside, I'd personally find something like foam wrap for pipes or even glue some old bicycle inner rube around the metal edge and then use some green painters Masking tape for a non permanent non sticky residue way to hold the rubber edge to the door. I don't think I'd drive around with the Eagle on the outside of my vehicle. Dust and road grime aren't good for bearings.

Q: 4. Is this just the button and I must also separately buy a station, or is this the whole intercom?

A: This is just the door unit. If you don't have a system, you need to buy a complete one like this one: a href= http://www.bhphotovideo.com/c/product/1040537-REG/aiphone_lem_1dls_access_sentry_system.html target= _blank http://www.bhphotovideo.com/c/product/1040537-REG/aiphone_lem_1dls_access_sentry_system.html/a

Q: 5. Can you adjust the tension on the scissor arms?

A: Unfortunately, the Impact Wall Mount Scissor Boom does not offer adjustable tension for the scissor portion.

Q: 6. What dimensions (in mm) are the rear mounting holes arranged in?

A: The dimensions and positions of the mounting holes are not listed by Huddlecam at this time. However if you email us at askbh@bhphoto.com we can guide you towards additional literature for this product that may help.

Q: 7. I would like to purchase extra rails for this rack. Will the 300 series rail work? Thank you.

A: Per Atlas, the extra rails are the WMA-RR24. https://www.bhphotovideo.com/c/product/501179-REG/Atlas_Sound_WMA_RR24_WMA_RR24_Rear_Rack_Rails.html

Q: 8. how far can i pull the keyboard tray out?

A: Up to approximately 37.6 from the wall.

Q: 9. Does it impede window operation? Can the window glass move a bit up or down with this attached to the door?

A: Yes it can, But the extra weight of this mount and your camera, lens, etc. may damage the window motors in doing so. This would not be a recommended practice.

Q: 10. How small can the pantograph collapse?

A: This Impact wall mount boom closes to about 9.5 inches from the wall.