The 36" deep Kendall Howard 37U Server Cabinet No Doors No Side Panelsis a completely open server cabinet with neither sides nor doors. Built without doors or side panels allowing maximum air flow for your network equipment. Built with a 36" depth, this server cabinet is suitable for telecom and datacom systems, A/V equipment, and small home audio/visual equipment. The cabinet features laser knockouts allowing you to install fans, while removable slots provide numerous cable routing options.

1300 lb Weight Capacity    800 lb Weight Capacity on Castors    Top Includes Removable Laser Knockouts    Preinstalled Casters and Levelers

The open frame design allows for maximum air flow for your network equipment.

Includes two sets of adjustable, vertical rails which extend to a maximum depth of 36" for versatile mounting options.

• There are numerous cable entry points on both the top and bottom of this open frame rack.
• There are also four large knockouts on the top of the frame to install fans, or for added cable pass through.

Casters and levelers are preinstalled to allow you to easily move and load your system into the desired location. Rack hardware not included.

Related Questions and Answers

Q: 1. Will the 4017b fit in here?

A: The Rycote Windshield Kit 2 would not be recommended for the DPA 4017b, as it will be slightly too short. The Rycote Super-Shield Kit for Shotgun Mics (Medium) (BH #RYSSKM) would be recommended instead.

Q: 2. Using an external power source, will this unit simultaneously be powered for operation AND charge the internal battery?

A: Yes, the ClouZen TAINER Portable All-in-One Backup Storage (No SSD) can be charged and used at the same time using an external power source. Note, if the temperature of the TAINER goes up during the backup, then stop charging. And never charge and use at the same time if you are using a Smartphone as the power source.

Q: 3. Can anyone tell me the thread size on the bottom of this unit (for boom pole, etc)? I need to adapt it to an old-school mic stand. Thanks!

A: Hi Jeff: thanks for your question. It's 3/8 . If your old-school stand is 5/8 , you can use the following adapter: a href= http://mymic.rycote.com/products/brass-3_8-m-to-5_8-f-screw-adaptor/. target= _blank http://mymic.rycote.com/products/brass-3_8-m-to-5_8-f-screw-adaptor/./a Basically, any 3/8 M to required size adapter will work. I hope that helps!

Q: 4. Can this accomodate a Sanken CS-M1?

A: No. The Rycote WS 9 Modular Windshield Kit is not compatible for use with the Sanken CS-M1 Ultracompact Shotgun Microphone. The WS 9 Windshield is intended for use with microphones that are up to 3.9" long and the CS-M1 is just over that at 4.06" long. As a compatible option, you can use the Rycote Modular Windshield WS 1 Kit MZL (B&H # RYMWS1MZLKIT) which is intended for use with microphones that are 2.8 to 4.7" (71 to 120mm) long.

Q: 5. What are the dimensions including the yoke? Will they fit neatly with other 4x4 modifiers?

A: From the pin to the top of the board is 47.2 inches while from the handle to handle, the measurement is 51.8".

Q: 6. Will the Sanken cs1 mic be compatible with this?

A: No, the Rycote Windshield Kit 10 is not large enough for a Sanken CS-1e.

Q: 7. I use this with my CMC641, but would like to get a miniCMIT. Any one know if it will work with that?

A: Hi Veronica. Yes, it will definitely work.

Q: 8. Which cloud backup services are supported by this device?

A: The ClouZen TAINER Portable All-in-One Backup Storage (No SSD) supports Google Drive, OneDrive, and Dropbox.

Q: 9. what is the country of origin for this item?

A: The country of origin for this item is the United Kingdom.

Q: 10. Will the top plate mount to the Komodo remote handle?

A: No, the Outrigger handle will not work with the 8Sinn top handle.