Achieve reliable performance from your unshielded twisted pair (UTP) LAN cables by finishing them with the Simply45 Cat 6 Unshielded RJ45 Modular Plug. One-hundred single-piece pass-through modular RJ45 plugs come packed inside of a convenient plastic jar, which are designed to fit 23 AWG solid or stranded Cat 6 cables up to 7mm in diameter in a straight-line arrangement. Each plug features a 3-prong pin design with 50μ 24kt gold plating to help deliver high electrical conductivity and a stronger connection to wire conductors and has a light green tint for easy identification. The Cap45 isolation cap/bar covers exposed wire ends to reduce the risk of electrical shorting. These modular plugs are rated to work with PoE and PoH devices.

Cat 6 Unshielded RJ45 Modular Plug    Supports Solid and Stranded LAN Cables    Gold-Plated 3-Prong Pins    Straight-Line Wire Insert    Green Tinted    Pass-Through Plug Design    Cap45 Isolation Cap / Bar    PoE/PoH Rated

Simply45's 3-prong pins feature 50μ of 24kt gold plating. Having a 3-prong pin provides three points of contact with the copper wire conductor, which provides a strong connection for high electrical performance and improved signal integrity with less heat build-up compared to a 2-prong connection.

The patented Cap45 design features a cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, which helps to prevent electrical shorts and other electrical risks by covering the exposed wire ends.

Related Questions and Answers

Q: 1. Can I use this device with xsw2?

A: This is a UHF transmitter, but it is not meant to be used with the XSW series of wireless microphones.

Q: 2. Work with shotgun mic?

A: Hello Don - the SKP 100 G4 will work with shotgun microphones that feature battery power, such as the Sennheiser MKE 600. If you'd like to use this transmitter with a microphone that requires phantom power, please look into the SKP 500 G4 as this will provide +48V for shotguns like the MKH 416 and MKH 8060. Please note that this item is a transmitter and you'll need a full system, including a receiver, for your shoot. Options for consideration might include the EW 100 ENG G4, EW 500 FILM G4 or EW 500 BOOM G4.

Q: 3. Sennheiser EW 100-ENG G2 series and I need to replace the transmitter. Would this G4 version work with the G2 series?

A: Yes they are backwards compatible. NOTE: In order for it to work they should be in the same frequency range, or at least a good portion of the frequencies should be within range of your existing system.

Q: 4. Is it compatible with the Audio-Technica AT8035 Long Shotgun ?

A: This SKP 100 G4 Plug-On Transmitter does not provide phantom power, so a shotgun mic such as the Audio-Technica AT8035 would only be compatible if used with battery power.

Q: 5. Greetings, I would like to know if the SKP 100 G4 is compatible with an older G3 transmitter in G band. I wish to send the audio output from a Sound Devices MM-1 preamp connected to a Sennheiser ME-66 mic (line output level). Will this work fine without an attenuator? Thank you.

A: Yes the Sennheiser SKP 100 G4 in G-band will work with a Sennheiser ME66 and G3 receiver in G-band.

Q: 6. Will this work with the AVX system? If not is there any similar product that will?

A: Unfortunately it will not. They are in 2 different frequency blocks. There is nothing like this transmitter for the AVX. If you need one you can get a Rode wireless that has only a mic plug and a receiver. This is the B&H part number B&H # RONSH.

Q: 7. Would any of these work in Bangladesh?

A: In Bangladesh the power plugs and sockets are of type C, D, G and K. The standard voltage is 220 V and the standard frequency is 50 Hz. So this combo Kit will work with most of the configurations in Bangladesh, but not all. Therefore I recommend getting a single power adapter with multiple Interlocking pieces.

Q: 8. Iceland? Which plug?

A: The Watson International Power Adapter Plug Kit comes with 5 different plug adapters. The one labeled "Northern Europe" is suitable for Iceland.

Q: 9. Will this work with the EW100-S3 model?

A: The SKP-100 G4 transmitter will work with EW100 G3 receivers as long as the frequency bands match.

Q: 10. Does this item contain samples of bacteria, too?

A: Only 1 slide with 3 types of bacteria (unidentified). Overall, it's a good material.