64X16 Matrix Switch Composite Video Router With Status Panel

64x16 Matrix Switch Composite Video Router With Status Panel

Product Code: eq122598
Availability: In Stock

$16,364.85 $22,583.49

Qty

12 reviews Write a review

Description
Reviews (12)

The 64 Input x 16 Output Crosslink Composite Analog Video Router with Status Panel from Matrix Switch is an analog video routing switcher with 64 BNC inputs and 16 BNC outputs that employs Crosslink technology and can be used as a standalone unit or it can be combined with other analog video routers to adapt to a two-channel YV router or three-channel YUV/RGB router.

Low crosstalk and very limited noise levels are achieved using premium quality components with extensive shielding and low-noise, linear on-board power supply regulation. A built-in web interface provides configuration and control options using a PC or mobile device. The unit supports the easy-to-use Mascot protocol, as well as other common third-party protocols. Two BNC ports provide tri-level sync or NTSC/PAL black burst, and users can store and recall up to 10 presets on the system.

RS-485, RS-232, AUX GPIO, and TCP/IP over Ethernet interfaces are all available on the router and two power ports are included, with one of these intended for optional, redundant power support.

64 BNC Inputs x 16 BNC Outputs Switch Inputs to Multiple Outputs RS-232 Control Supported Redundant Power Supply Store and Recall up to 10 Presets Tri-Level Sync or NTSC/PAL Black Burst

Processing
Switching Type	Software
Processing Resolution	576i
Input
Video Inputs	64x BNC (Composite) Female
Input Video Format	Composite 480i / 525 lines 576i / 625 lines
Output
Video Outputs	16x BNC (Composite) Female
Output Video Format	Composite 480i / 525 lines 576i / 625 lines
Connectivity
Other I/O	2x BNC Blackburst, Tri-Level Sync Input/Output 1x RJ45 Control, LAN Input 1x DE-9/DB-9 Control, RS-232, RS-485 Input 1x Unspecified Interface GPI Input
Hardware
Wi-Fi	Yes
Bluetooth	Yes
Power
Power I/O	2x DE-9 Input
General
Operating Conditions	32 to 107°F / 0 to 75°C up to 90% Humidity
Storage Conditions	14 to 212°F / -10 to 100°C
Certifications	CE, FCC, RoHS, UL
Rack Form Factor	2 RU
Dimensions	19 x 11 x 3.5" / 48.3 x 27.9 x 8.9 cm
Weight	12 lb / 5.4 kg

Additional audio level can be connected to DB25 connector with breakaway support
Inputs can be switched to multiple outputs without restriction
Vertical interval switching using vertical sync input (tri-level sync or NTSC/PAL black burst)
Store and recall up to 10 presets
Includes panel with status lights
Supports Matrix Switch Corporation remote panels
Ethernet port for control via built-in web page interface or TCP/IP ports
Interactive web page interface
Serial control via RS-232 port
RS-485 port for an additional high speed long distance capable control interface
Support for some common third-party protocols for added integration flexibility
Auxiliary port for external status and control signaling
Real Time Operating System (RTOS) with 32-bit ARM processor
System software updates from webpage interface
Redundant power supply included
Complies with all relevant FCC, U/L, CE, and RoHS requirements

Related Questions and Answers

Q: 1. Does it do scanline doubling? My input to the device would be 240p s-video that needs scanline doubling to produce the full image when output at higher resolution.

A: This product does offers an S-Video Input and will allow that signal to be up-scaled for viewing on a 4K TV through HDMI.

Q: 2. is this 50 Ohm or 75 Ohm?

A: Since this is for Composite video signals and not for power or control, the unit is 75 Ohm.

Q: 3. will this cable work with my canon XHA1 video camera?

A: Yes, the StarTech Composite & S-Video to USB 2.0 Video Capture Adapter Cable could capture from the Composite output of the Canon XHA1 camera. The Startech Capture cable would connect to a Windows PC via USB-A. The XHA1 has a composite output. The composite adapter cable does come with the camera. If you lost the composite cable it is listed below. Canon STV-250N Stereo Video Cable BH #CASTV250N

Q: 4. Can I use this cable to connect my 8m video camera to my computer in order to convert film to digital?

A: The StarTech Composite & S-Video to USB 2.0 capture device will work with any analog RCA or S-video signal. As long as your camera has an RCA or S-video output, this should work to convert its video to digital.

Q: 5. Is there a capture device like this that can upscale the video to 1080? or does that need to happen after?

A: The SVID2USB232 does not upscale the resolution. However, you may be able to upscale the resolution using third party software which is not provided with the unit. Atha, StarTech.com Support

Q: 6. what is the country of origin?

A: According to the information we have, our current inventory's Country of Origin is Taiwan. Please be aware this can change over the product's production life without notice.

Q: 7. Does it work with Old Computer b/w video signal ?

A: This device is for taking Composite video from an older camera and getting it into acomputer. It is not for taking a signal from a computer. We need additional information in order to help. Please email us. provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a

Q: 8. how do i get setup link?

A: Connect via USB and consult the included manual for a complete or customized set-up. Make sure you have downloaded the correct driveres from Logitech's website for this product. They will also offer a .pdf of the set-up manual.

Q: 9. If a 4:3 aspect ratio composite video signal is input, will the 4:3 aspect ratio be preserved when the hdmi output is displayed on a modern monitor, or is the image stretched to 16:9 aspect ratio?

A: This device allows you to select the scaling and zooming that works best for the image.

Q: 10. Will this work with SDI signal?

A: No it will only work with Composite Video.

Willie	28/09/2024
[2 RU] GREAT 5

Brent	27/09/2024
[576i] I am using this and it works perfectly. I have 2 PC's and 2 streaming devices connected to the 4 inputs, and 3 monitors and a TV connected to the outputs. Audio and 4k60hz video can be seamlessly toggled between inputs and outputs over the web interface. Does everything I hoped perfectly. 5

Tyler	14/08/2024
[Software] I had two problems to solve. I wanted to be able to switch between game consoles without turning my entire CRT around to access the S-video port in the back. I also wanted a splitter to output to a capture card for live streams. This does both those things, and it does so without any noticeable loss in quality or added latency, at least to my eyes. 5

Joe B	11/08/2024
[2 RU] The switcher works as expected. I thought it might use the same IR code as my component switcher, which I did not want. But there was no interaction. 5

Da Accounts	18/07/2024
[576i] Exactly as described. 5

Jonathan	29/06/2024
[Software] Top-notch quality like never before highly recommended 5

Stephen	16/05/2024
[Software] I'm an old time video guy - if you had told me 20 years ago that I could by a 4x2 Matrix switcher for under $200 I'd say you are crazy. This thing is super easy to use and looks great. Fantastic product! 5

Ben	24/04/2024
[2x DE-9 Input] After using this a few times I got to say this is an amazing piece very high-quality and easy to use. I would definitely recommend buying this. 5