[3.3 x 3.25 x 1"] Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet

[3.3 x 3.25 x 1"] It's definitely pricey, but it's totally worth it.

[3.3 x 3.25 x 1"] Vinten heads come with very low bowl clamps, and that's fine if you have a wide opening to work with. But the Flowtech 75 is a narrow opening, and that makes it difficult to adjust the short Vinten clamps. This one is designed specifically for use with these legs, so it's the perfect fit, offering more to grab when you reach for it. And, it's still short enough that it doesn't hit the ground when the legs are lowered to their lowest point.

[3.3 x 3.25 x 1"] My flowtech legs have little magnets that hold the legs in place when closed, so this handle is all I need to carry the tripod.

[0.04 lb] Well built with no issues. Works on my Sachtler flowtech 100

[0.04 lb] This is the best tripod design that I have seen in my almost 40 years of shooting film and video. It's lightweight and easy to adjust and level even when the camera is mounted. I love having the locks where they are easy to reach. It is perfectly steady when using a fully rigged out Canon C300 and 40" slider. The magnets keep the legs firmly together for easy transport. It has all the build quality that you expect from Sachtler. I does have an odd rainstick sound effect when extending the legs, but that's an observation not a criticism. I would definitely recommend this tripod. Yes it's $$$$ (it's Sachtler), but your back will appreciate it at the end of the day.

[0.04 lb] I bought a used Flowtech. The tie down was not included. I tried to use the tie down from my 100mm Sachtler head but it was too wide for the Flowtech legs to close completely. This tie down is narrower and allows legs to close all the way. Kind of a bummer to have to purchase a specific tie down but it works. The Flowtech is really great.

[0.04 lb] As is typical of Sachtlers stuff, this is well built and does the job. I wouldnt normally even bother to review this, but wanted to add a note for anyone considering using this with a Gitzo systematic tripod with 100mm half bowl adapter: I found that it would not grip the screw from my Sachtler DV 12 SB when mounted on my Gitzo GT3543XLS with the GD3322V100 (series 2-3-4) 100mm adapter. Its no fault of this flowtech tie-down-- it was not designed for it.
The tie-down that DOES work for this set-up is the 75mm tie-down from my Sachtler DV 6 SB. Havent tried other tie-downs, such as the older Sachtler 100mm, but will report back if I do.

[Black] So far, I love this tripod. Coming from Libec and Manfrotto sticks... I've had a Sachtler head for a long time but never upgraded the tripod itself. It is far and away faster to setup, easier to raise and lower, easier to carry when folded and easier to move with the camera on the sticks thanks to the included handle. They are very rigid.

The only con I've noticed is that sometimes the feet tend to get twisted or don't flatly contact the ground when setting up, probably from getting bumped around while folded up.... but I've never had this happen with any other tripod. It's not a big deal, happens rarely and I just tweak it back to normal and I'm good to go.

I do wonder about long-term wear and tear. I've already got some good scratches in the carbon fiber legs after 2 months of normal use.

[3.3 x 3.25 x 1"] I bought this setup to replace a Miller head I used on a Gitzo tripod for years. While that setup was very good the Sachtler is just a bit better especially with really long, heavy glass like the 600 f4. The setup on these legs is very fast but takes some getting used to. They work perfect for chasing Elk and deer in the mountains which is where I typically use this. The head easily handles the weight of my 400 2.8 and allows me to use the 600 f4 when needed. Shooting stills from a fluid head is a breeze and I prefer this over the gimbal heads I used to use for birds in flight with long glass. If you can get past the high cost you will be happy with your choice.