Lighting designers in search of a quality wash fixture will be impressed with the American DJ COB Cannon LP200ST, a potent color-mixing wash lighting fixture with a 5-in-1 RGBAL COB (chip on board) light source, allowing for a powerful LED engine to be placed in a small amount of space, making it ideal for mobile or permanent installations in clubs, houses of worship, and event spaces. The high-powered 5-color LED PAR can produce ceiling and wall color washes with high luminescence and smooth color mixing.

The 4-button digital display lets you access pro features, including 0 to 100% dimming with four selectable curves, flicker-free operation, and strobe/pulse effects. In addition, the wide 80° beam angle can be customized to 40 and 50° with the included lens kit, and up to seven fixtures (120V) can be powered out of one power outlet by daisy-chaining each unit using the powerCON input and output sockets. The COB Cannon LP200ST comes equipped with a double-bracket yoke that allows for flexible positioning on a truss or upright on the floor. It includes the ADJ RFC remote control and ships with a powerCON power cord.

200W 5-Color RGBAL COB LED    Wide 80° Beam with High Illuminance    10 DMX Channel Modes    64 Built-In Color Macros    0 to 100% Dimming    6 Dim Modes + 4 Dim Curves    Strobe/Pulse Effects    Lens Kit for 40 and 50° Beams    Includes UC IR Wireless Remote    Includes Scissor Yoke and powerCON Cable

• 200W 5-in-1 (RGBAL) LED with COB (chip on board) technology, rated at approximately 50,000 hours
• Wide 80º beam with high illuminance
• Includes lens kit to narrow beam to 40 and 50º
• Flicker-free operation (no flickering on camera)
• Produces powerful, smooth RGBA color mixing with rich palettes of color
• Use as wash/PAR or for pixel mapping for a stunning visual effect
• Scissor yoke allows fixture to be mounted on a truss or set on the ground
• Run all night—no duty cycle
• 10 DMX channel modes: (5, 8-A, 8-B, 9, 10-A, 10-B, 12, 13, 16, 20)
• 64 built-in color macros
• 4-button digital DMX display on the rear panel
• Works with the ADJ UC IR remote control (included)
• LED pulse and strobe effect
• Electronic dimming: 0 to 100%
• Selectable dim curves: Standard, Stage, TV, Architectural, and Theatre
• Refresh rate:14 presets from 900 Hz to 25 kHz
• 3- and 5-pin connectors for DMX linking
• Locking power in/out connections to daisy chain power (7 fixtures at 120V, 14 fixtures at 230V)
• Optional barndoors (BAR001) sold separately

Related Questions and Answers

Q: 1. Will this light take NP - F batteries and can it do it out of the box?

A: Yes, the amaran COB 60x S Bi-Color LED Monolight comes with a Dual NP-F Battery Plate for DC Barrel (5.5mm) that attaches to the light so you can use two NP-F batteries.

Q: 2. Can this run on batteries?

A: Yes, the following is needed as well batteries of choice. Aputure 2-Bay Battery Power Station (V-Mount) B&H # APAAKS2BPSV MFR # APD0170A3B https://bhpho.to/3Vn3nlR

Q: 3. What's a good size lantern softbox for this light?

A: The Godox Collapsible Lantern Softbox (26.6") would be a great softbox option for the COLBOR CL60R RGB COB LED Monolight: https://bhpho.to/3g0XZyZ.

Q: 4. How much will this light last if powered with two NPF 970 batteries?

A: With an average capacity of 57Wh for a NPF-975, the amaran COB 60x S Bi-Color LED Monolight BH #AMAPA0020A20 would have a run time of just under 2 hours.

Q: 5. Is this gridded softbox compatible with the Intellytech Light Cannon F-485? I see that the Light Cannon and 485 have a 7 "lens, so I am looking for a softbox for this gridded fresnel that is fully compatible.

A: The Intellytech Softbox for F-300 and F-485 LED Fresnels, BH # IN173007 is the only compatible softbox for the F-485 at this time. https://bhpho.to/3zVIhQg

Q: 6. What do I need to power this from a v mount battery? And will a 99watt battery work if I only use the light at half power?

A: Yes, a 99WH battery will work on the amaran COB 100d S Daylight LED Monolight if used at half power. You will need the Aputure 2-Bay Battery Power Station (V-Mount) in order to attach V-Mount batteries to the light. (B&H # APAAKS2BPSV)

Q: 7. When combined as shown with other units do they each need to be plugged in or do they power each other in series?

A: Each COLBOR CL60R RGB COB LED Monolight needs to be plugged into an outlet in the wall to power them.

Q: 8. I've heard from others that the fan noise on the 200d was loud and obnoxious. Is that problem fixed with the new 200d s?

A: Fans on lights of this level will with the Amaran 200d will make some noise. If you are able to use a mic with an isolating pattern and move it from the light you can work around the fan noise. If you are using only a multidirectional room mic with the mic placed near the light you will of course pick up the fan.

Q: 9. Will the Bowens mount on the amaran COB 60x S Bi-Color LED Monolight hold up well with a Godox 60 x 90 cm softbox?

A: The amaran COB 60x S Bi-Color LED Monolight BH #AMAPA0020A20 would be fine with a 60x90cm softbox.

Q: 10. What travel case is good for this product?

A: Yes, we suggest the following unit for your travel needs. Pelican 1615AirWF Wheeled Hard Case with Foam Insert (Black) BH #PE1615ACFB • MFR #016150-0001-110 https://bhpho.to/4317bvT