Designed for SpeechLine digital wireless systems, the Sennheiser AWM 2 MK II Wallmount Antenna 1.9 GHzis an antenna that can be discreetly mounted either on a wall for permanent installs or on a tripod for mobile setups. The AWM 2 MK II features a robust metal housing with two connectors on the top to attach the two white rod antennas—tuned to the 1.9 GHz frequency range. Integrated R-SMA sockets on the bottom side allow for a direct connection of the antenna cables, thus simplifying installation. There is a 3/8"-16 internal thread at the bottom for tripod attachment as well as two 0.35" mounting holes at the rear for wall attachment.

Unobtrusive Antenna for SpeechLine    Allows for Wall or Tripod Mounting    2 Rod Antennas (White)    Robust Metal Housing

Related Questions and Answers

Q: 1. I have receptor trouble wont let me pair if i press the pair button all the green leds turn on and then it shut off it self, any idea about the problem? Thanks

A: In order to assist you it would be helpful to know which transmitter you are using with the AVX EKP receiver. There are two options -- the Sennheiser SK AVX Digital Bodypack Transmitter - 1.9 GHz (B&H # SESKAVX4) and Sennheiser SKM AVX-835S Digital Handheld Microphone Transmitter - 1.9 GHz (B&H # SESKMAVX8354). The receiver and transmitter must both be powered on and within line of sight of each other in order to pair them. The transmitter and receiver need to be within close proximity and able to "see" each other during setup. Please be aware that other Sennheiser transmitters like those from the Evolution series or the XS series (which operate on the UHF band) or XSW-D series (which operates on the 2.4 GHz band) are not compatible for use with the AVX series receiver. Please contact us by phone or through live chat on the website if you have additional questions or if you would like further assistance to troubleshoot the problem.

Q: 2. How do I sync the AVX Digital Handheld Microphone Transmitter with a separately purchased AVX receiver? I have turned both on, hit sync and nothing happens.

A: To establish a new radio link between a receiver and a transmitter, proceed asfollows:Switch on the receiver and the transmitter that you want to pair.The status LED on both the receiver and the transmitter indicates the currentdevice status.Long-press, one after the other, the Pair buttons of the receiver and the transmitter to be paired until their status LEDs flash alternately green and red. You have 120 seconds between pressing the first button and the second button.Press pair on receiver appears on the transmitter display panel.Existing radio links to other devices are now disconnected.Wait for approx. 10 seconds until the radio link is established.- Once the radio link is successfully established, Paired appears on thetransmitter display panel and the status LED on both the transmitter andthe receiver lights up green.- If no radio link can be established, Pairing failed briefly appears on the transmitter display panel, followed by the message No Link. The statusLED of the transmitter and/or the receiver lights up red.

Q: 3. Does this mic have a mute switch?

A: Yes

Q: 4. How long will the batter last? How many hours?

A: The Sennheiser AVX EKP Camera-Mount Digital Plug-In Receiver (1.9 GHz) has an estimated running time of 4 hours on a full battery charge.

Q: 5. Can the MMK 965 or MMD 945 modules be used on this transmitter?

A: No only two heads are compatible: MMD 42-1MMD 835-1

Q: 6. How long do the batteries last on this and is it advisable to get another for a day long shoot?

A: The Sennheiser BA 10 Rechargeable Battery Pack, (BH # SEBA10) has an operating time of 15 hours. It is always a good to have an additional battery, or a set of AA batteries on-hand, as a back up.

Q: 7. Can the receiver be powered/charged via a Dtap source? (DC 11.9-17v, Unregulated). With a Dtap to Microusb cable?

A: The voltage of the Dtap unit would be too much for the battery to handle. A standard usb power brick can be used to charge the batteries. BH #RARPPB010.

Q: 8. is the orientation of the xlr male connector adjustable? or is it fixed.

A: If you need more space, use a 1 foot XLR cable to extend.Enter an answer to this question.

Q: 9. does this come with the AA battery sled, or the li-ion rechargable batt?

A: You would have to purchase the li-ion battery separately. B&H # SEBA30.

Q: 10. What are the physical dimensions of the mic? It's not listed in the specs. Only the box is listed.

A: It is about 2 wide at the head and 10.5 Long.