You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Violectric Hpa V550 Headphone Amplifier Preamp

Violectric Hpa V550 Headphone Amplifier Preamp
  • Product Code: eq123227
  • Availability: In Stock

$8,999.97 $13,589.95

Designed to drive everything from low- to high-Z loads for headphones or loudspeakers, the HPA V550 Headphone Amp and Preamp from Violectric delivers versatile functionality and low-noise, low-distortion circuits specially optimized for dynamic and orthodynamic headphones. With support for headphone impedance loads of 16 to 600 ohms, the V550 can drive the most demanding headphones, while pre-gain selection via DIP switch and pre- or post-fader selection make the unit equally comfortable as a high-fidelity studio preamplifier.

The V550 sports balanced stereo Neutrik XLR outputs and inputs, two unbalanced RCA inputs, four unbalanced RCA outputs, two unbalanced 1/4" stereo TRS headphone outputs, and one fully balanced, Neutrik XLR 4-pin stereo headphone output with gold-plating for true balanced headphone amplification. This amp features plenty of control over your amplified signal with standard volume control with balance knob, dedicated input and output selection, and a wireless infrared remote control for conveniently controlling volume and selecting inputs or outputs.

Balanced Headphone Amp and Line Preamp    Supports 16- to 600-Ohm Headphones    Balanced XLR Inputs and Outputs    Unbalanced RCA Inputs and Outputs    Balanced XLR 4-Pin Headphone Out    Two Unbalanced 1/4" Headphone Outs    Standard Volume Control    Pre or Post Fader Selection for Line Out    Pre-Gain DIP Switches for Input/Output    Includes Infrared Remote Control

Key Specs
Number of Headphone ChannelsSingle Channel
Recommended Headphone Impedance16 to 600 Ohms
Headphone Output Power6400 mW into 50 Ohms (Max)
735 mW into 600 Ohms (Rated)
Analog Audio I/O2x XLR 3-Pin Balanced Line Input (1 Stereo Pair, Rear Panel)
4x RCA Coaxial Unbalanced Line Input (2 Stereo Pair, Rear Panel)
2x XLR 3-Pin Balanced Line Output (1 Stereo Pair, Rear Panel)
2x RCA Coaxial Unbalanced Line Output (1 Stereo Pair, Rear Panel)
1x XLR 4-Pin Balanced Stereo Headphone Output (Front Panel)
2x 1/4" TRS Unbalanced Stereo Headphone Output (Front Panel)
Power RequirementsAC Input
Parameters
Number of Headphone ChannelsSingle Channel
Recommended Headphone Impedance16 to 600 Ohms
Headphone Output Power6400 mW into 50 Ohms (Max)
735 mW into 600 Ohms (Rated)
EQNo
DisplayNo
Connectivity
Analog Audio I/O2x XLR 3-Pin Balanced Line Input (1 Stereo Pair, Rear Panel)
4x RCA Coaxial Unbalanced Line Input (2 Stereo Pair, Rear Panel)
2x XLR 3-Pin Balanced Line Output (1 Stereo Pair, Rear Panel)
2x RCA Coaxial Unbalanced Line Output (1 Stereo Pair, Rear Panel)
1x XLR 4-Pin Balanced Stereo Headphone Output (Front Panel)
2x 1/4" TRS Unbalanced Stereo Headphone Output (Front Panel)
Digital Audio I/ONo
Network I/ONo
USB I/ONo
Performance
Frequency Response5 Hz to 250 kHz -0.5 dB
Gain/Trim Range0 dB +6 dB
Maximum Input Level+21 dBu
Maximum Output Level+21 dBu
Dynamic Range> 131 dBA
ImpedanceOutputs:
< 1 Ohm
Line Inputs:
10 Kilohms
THD+N< -102 dB / < 0.0008% (At 1 kHz, 2 x 10V, 100R = 1W)
< -100 dB / < 0.001% (At 1 kHz, 2 x 4V, 32R = 0.5W)
Noise< -103 dBu (A-Weighted)
Crosstalk-105 dB (At 1 kHz)
-100 dB (At 15 kHz)
Channel Balance6 dB
Damping Factor320 at 50 Ohms (Unbalanced)
160 at 50 Ohms (Balanced)
Power
Power RequirementsAC Input
AC Input Power115 to 230 VAC, 50 / 60 Hz (T 1 A)
Ground LiftYes
AC/DC Power AdapterNo
Power Consumption50 VA
Physical
Dimensions11.4 x 10 x 3.1" / 29 x 25.4 x 8 cm (with Feet)

Related Questions and Answers

Q: 1. Please explain the mono switch. What I'm looking for his a device that will mix the stereo channels into mono and deliver the mono signal to both headphones channels. Can this unit do that?

A: The stereo/mono switch sums the stereo input to mono. In this mode all headsets connected will be fed a mono signal. (Same signal to both left and right).

Q: 2. how long does the 9 volt run this unit?

A: I've never done a controlled test, but we've used these for several years and I'm perfectly happy with the battery life. I think they'll last as long as in any other basic IFB box.

Q: 3. is it possible for a battery to run this unit?

A: Unfortunately no. It must have DC power.

Q: 4. Will this Rolls RA53B shipped with 220V power adaptor?

A: The 12 VDC Power Supply included is designed to accept 120 VAC only.

Q: 5. Is it have enought impedance output for 300 Omhs headphones?

A: To drive higher impedance headphones(such as 300 ohm phones) a amplifier usually needs to produce a higher voltage swing. This is not a case of having "enough impedance for 300 ohm headphones", but of having enough voltage. Having "enough" depends on the sensitivity of the 300 ohm headphones and the voltage output capability of the amplifier, and how loud you prefer to listen. This amplifier can produce a RMS voltage swing of no more than 4.2 volts. That may be enough if you have sensitive headphones (more than 100dB/volt) and listen at safe levels. However, if your phones have low sensitivity(less than 96 dB/volt)and you want to listen at hearing-damaging heavy metal levels, then this amp won't be powerful enough.

Q: 6. What exactly does Output Impedance Minimum 10 ?, per channel mean? I'm trying to find out the actual impendance output of this amp and I don't know what they mean by minimum ? Can anyone clear this up for me? Thanks.

A: Don't buy this unit it's a piece of junk it doesn't work.

Q: 7. Hi, is the adapter 110v or 230v ?

A: The ART HeadAmp4 available from B&H will ship with a 110VAC power adapter.

Q: 8. Will this unit drive a 250 ohm headphone with enough power to where I dont feel like I need a higher power amp?

A: This is a professional, studio- quality headphone amplifier that is compatible with low and high impedance headphones, and will have the power to handle 250 Ohm headphones.

Q: 9. Are these good for podcasting?

A: Hi, Thank you for reaching out. Great for podcasting using more then one set of headphones or to send out audio out to other equipment.

Q: 10. It can be run also with DC?

A: P.S. Here is what is printed on a U.S. power adapter:BEHRINGERITE POWER SUPPLYMODEL: U090075AITEM NO: PSU-MINI-UL-01INPUT: 120 V AC 60 Hz 0.15AOUTPUT: 9 V AC 750 mA

24/07/2024

[Single Channel] It can do more than you think it can do. It improves your sound so much better. It cleans the sound and make it punchy and better. I like this little piece of equipment. It is really worth it.

5
16/07/2024

[0 dB +6 dB ] works great. although didnt need as receiver had enough power on its own

5
14/06/2024

[> 131 dBA ] Great sounding amp. I'm sure it will satisfy for years to come. The service at B & H was fantastic. Love this company.

5
09/06/2024

[Single Channel] Original intent was to downsize space-wise (which it did)--HOWEVER pleasantly SUPRISED at the Audio oomph.BIG Sound in a small Package!!

5
08/06/2024

[50 VA] I have this hooked up with my PC's Line Out with Realtek Audio Console and with my AKG K240s, sound quality is very nice.


Construction of the amp is solid, all ports are secured and dials are easy to turn. I would recommend buying a four channel amp like this instead of a single channel for its versatility for use cases such as podcasting or studio work.


Overall, very happy with this purchase.

5
24/05/2024

[0 dB +6 dB ] One of the absolute BEST solid state amps made today… PERIOD.
Warm sound, great depth, great detail and soundstage is deep and BIG.
The warmth feels “tube- like” but not over done or veiled… just rich, lush sound all around!!

5
11/05/2024

[16 to 600 Ohms] This is a handy dandy item at a good price. I'm a videographer and sometimes more than 1 person needs to listen to the audio as it is being captured. The solution is this headphone amp/splitter. Also comes with adapters so if your headphone has an 1/8 or 1/4 connector, you are in business. Individual volume pots are a nice feature.

5
08/05/2024

[16 to 600 Ohms] In the category of small and inexpensive headphone amps, this one is a winner. It is well made, includes all the necessary cables and adapter plugs, is loud enough for almost any headphone and delivers pristine sound. I have used it with Teams, Skype and zoom video conferences where multiple people want to listen in with differing levels of loudness without disturbing others. Even attaching it to a laptop delivers excellent sound to a single headphone at a loudness level that exceeds what a laptop can deliver over the 3.5mm audio-out connector. I tested the amp with Sony, Sennheiser and AKG headphones and in all cases the sound was as good as can be expected.

5
22/04/2024

[0 dB +6 dB ] I felt skeptical when first ordering this, honestly. I was worried that it was _too inexpensive_ to be any good, but I talked to a specialist and took the leap.


For what it is - a powered headphone hub with individual volume controls, basically - it's fantastic. I don't have testing equipment so cannot quantify how good a job it does at faithfully reproducing sound, but to my picky ears, it does a great job. No hiss, background noise, no issues raising or lowering the level (volume). It just works.


It solves a problem for me where I had two headphones, one with a much higher impedance than the other, and a listening partner with a much lower volume appreciation than me. Now, my headphones can be as loud as I want them, while the other set is as quiet.


I would get this again without hesitation. I bought one for my aging folks, too, because they have a similar listening situation as I do. A+. Also, thanks to the specialist who helped me pick this out!

5
30/11/-0001

[> 131 dBA ] With more people working from home, two or more people with this headphone amplifier can listen to a video stream without disturbing others. In a family Skype or zoom call, different family members can adjust the volume levels to their liking. And the sound quality is great. Attaching studio headphones to the 3.5mm analog out of my laptop provides a great sound experience, better than without extra amplification. Such a small and reasonably priced device with so many applications!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Violectric Hpa V550 Pro Headphone Amplifier Preamp

$10,799.97 $16,631.95

Violectric Hpa V202 Headphone Amp

$2,997.00 $4,075.92

Violectric Dha V590² Headphone Amp, Preamp, Dac

$11,099.97 $17,093.95

Violectric Dha V590² Pro Headphone Amp Preamp Dac

$12,899.97 $18,059.96

Violectric Niimbus Us 5 Headphone Amp

$17,999.97 $24,479.96

Violectric Niimbus Us 5 Pro Headphone Amp

$19,799.97 $31,085.95

Xlr Headphone Amplifier

$389.97 $499.16

Ha4000 Pro Headphone Amplifier - On-stage

$128.85 $168.79

Spl Phonitor 2 Headphone Amplifier - Black

$5,397.00 $8,581.23

Spl Phonitor Headphone Amplifier Black

$3,597.00 $5,719.23

Spl Phonitor Headphone Amplifier Silver

$3,597.00 $4,532.22

Products You May Like

Jbl Irx108bt 8" Portable Speaker Pair Kit

$2,399.85 $3,431.79

Tiffen Gold Diffusion/fx 3 Filter 4 X 5.65"

$1,527.00 $2,000.37

Qnap Ts-h1090fu 10-bay Nas Enclosure

$19,797.00 $31,477.23

Xinfrared T2 Pro Thermal Camera For Iphone

$1,197.00 $1,508.22

Asus Geforce Rtx 4070 Dual Oc White Edition Gpu

$1,709.97 $2,205.86

Gvm 20x50 Hd Porro Binoculars Black

$147.00 $217.56

Tokina Szx 400mm F/8 Reflex Lens For Fujifilm X

$1,017.00 $1,494.99

Tiffen 4.5" Round Pro-mist Filter

$716.85 $860.22

Cinegears Pegasus Circle Hardware Kit 67"

$1,005.00 $1,316.55