This Kendall Howard ESD Workbench 48provides technicians in static control environments an ESD safe work space for servicing and maintenance of sensitive electronic components across a multitude of industries. Designed for optimal ergonomics and static control, the ESD Workbench can be adjusted in 4" height increments from 30" up to 38" in minutes. Each table includes two grounding options to ensure proper static protection. Ground 1 is through an included 10' external Earth ground wire. Ground 2 is established with a unique aluminum boot attached to a leg level to provide a connection to all non-insulated or ESD safe flooring. Workbench is also equipped with a single strategically placed wrist grounding strap grounding point. (Wrist straps not included)

1000 lb Load Capacity    ESD Protected Laminated Work Surface    RoHS 3 Compliant

The worksurface can be fixed into three different heights in 4" height increments from 30"-38".

Work surface has a low electrical resistance and will diffuse static charges to ensure protection of sensitive devices during assembly. Resistant to most common solvents, solder and fluxes creating an extremely durable surface.

ESD tables can be grounded two ways. A 10' long Earth ground wire is provided to attach to common grounds. The second ground is built into a leg leveler with a unique aluminum boot. Workbench also includes a designated wrist strap grounding point.

Resistance to top 1.0 x 10^5 - 1.0 x 10^9 Ohms resistance at 70° F & 30% relative humidity. Resistance to ground (Common Ground Point, Wrist Strap, Floor Ground Equipment Ground) tested 1.0 x 10^5 to 1.0 x 10^9 Ohms resistance @ 70° F and 30% relative humidity.

Related Questions and Answers

Q: 1. How do I assemble this thing without breaking the poles?

A: Use muscle to bend the pole. if you cant bend, take item to the gym and ask someone to bend the poles into the wholes, then ask if you can take their picture. Win win everyone

Q: 2. What is the difference between this unit and the less expensive MEDV3ESD1 located here?: a href= http://www.bhphotovideo.com/c/product/599912-REG/METRO_DataVac_DV_3ESD1_DATAVAC_3_ESD_Anti_Static_Computer_Electronic.html/prm/alsVwDtl target= _blank http://www.bhphotovideo.com/c/product/599912-REG/METRO_DataVac_DV_3ESD1_DATAVAC_3_ESD_Anti_Static_Computer_Electronic.html/prm/alsVwDtl/a

A: They would be the same, except for the voltage. This model can also be used in countries that are on 220/240v.

Q: 3. What adaptor would I need to use this with Broncolor lights ?

A: The Elinchrom Litemotiv Octa Bracket for Bron Pulso, B&H # ELLMBBP, would be required to connect the Godox P120L Parabolic Softbox with Bowens Mounting (47.2 ) to a Broncolor light fixture. It is the only 16-sided speedring we carry compatible for use with Broncolor lights.

Q: 4. Does this unit come with a power supply?

A: No, the StarTech 7-Port Industrial USB 3.0 ESD and Surge Protection Hub does not come with a power supply.

Q: 5. What is the length of the power cord?

A: Power Cord: 12 ft., heavy-duty, 3-conductor

Q: 6. Do these have some way to attached them to a stand/tripod?

A: Most people like to use one of these for easy control. https://bhpho.to/2JwpKmK

Q: 7. Can this be used with Godox ML60 bi (first version) light?

A: Yes, if paired with the Godox S2 Speedlite Bracket for Bowens the Godox Deep Parabolic Softbox (48") will connect to the Godox ML60 bi light.

Q: 8. Do you have stock for 2 unit of Metro datavac / 3ESD1 with input power 220 Volt, not the 120 Volt? Thank you.

A: B&H currently does not carry a 220v version of this item.

Q: 9. How can I mount this on a Paul C Buff Einstein (balcar mount)?

A: The Westcott Zeppelin Speed Ring & Bracket for Balcar B&H # WESPZBQ would be a compatible speed ring for the Einstein monolight. https://bhpho.to/2QT0HPb

Q: 10. is this working as blower or just a vacum, thank

A: The DataVac®/3ESD is a complete anti-static vacuum/blower system.