A lightweight and uncomplicated acoustic solution, the Vicoustic ViCloud VMT 3D Natural Stones Emperador Darkhangs in the ceiling suspended in the air to support and manage sound where there is a lot of background noise, conversation, and disruptive sounds, such as in restaurants, open-plan offices, convention centers, and atriums. This square-shaped VMT ships in a box with four pieces. The ViCloud VMT 3D are ready to be installed without the need of professional assistance and in lots of different of spaces.

Lightweight Acoustic Suspension Solution

Related Questions and Answers

Q: 1. If I wanted to switch out fluorescents for Tungsten bulbs, which would I use?

A: Hi Victoria, there are 3200k CFL bulbs out there. Alzo is a good brand. The large CFLs are a bit heavy for the stands, so it's wise to get the standard size bulbs. There are also some new 3000k LED E26 bulbs made by Eiko and others. I use LED bulbs and really like them.

Q: 2. What are the dimensions of the bag, and how much does it weigh with everything in it?

A: Hi Emma,The bag (fully loaded) weighs just under 20 lbs. This is without the bulbs. They easily fit in the bag with the rest of the lighting kit. But I pack them seperatly in a hard case for protection. That adds another 2-3 lbs to the total package. The outside dims (again when loaded) is about 8x9x36 inches. Hope this helps,Rick

Q: 3. Can you use L.E.D. bulb on this kit

A: I don't see why not.

Q: 4. What is the weight of the whole kit? including the bag?

A: I use the three light kit almost exclusively with the soft box covers. Produces great light for VLOG production and fill light for shooting portraits. I purchased another IMPACT carry bag to make it easier to carry the kit, extension cords, etc.

Q: 5. Are these lights silent? What about after a year? I've worked with low-end flo kits that buzzed and I don't want to waste my money on buzzy lights.

A: They don't have a buzz to them. They have a slight little noise but it's tolerable. They are not very bright though :/

Q: 6. Are the lights cool?

A: Yes, But not as cool as LEDs.

Q: 7. Could this be used to shoot a video interview in a small room with a DSLR? I want to make sure I have enough lighting for 24fps at 1/50th...? It doesn't have to have a lot of emotion or anything, just has to be well lit to look like quality recording.

A: Yes this will work very well. If the room is small, you may have too much light with all the bulbs installed. The light can be easily adjusted by distance to the subject and number of bulbs in each fixture. I have been very pleased with this unit. Lots of good light, at around 5200K as I recall. Very well constructed and should give years of good service.

Q: 8. I am new to lighting set up, can I switch the bulb holders to hold flashes/sped light?

A: If your question relates to re-dedicating the stand to hole another fixture , then the answer is yes. I don't have the gear handy to measure, but tripods/stands have various stud diameters and I'd look at the Impact product specification to get the size. From there, you can see if your fixture will mate onto that stud.If you look closely at the thumb nut on the bottom of the fixture, this is the means of tightening it onto the stud.

Q: 9. Can the bulbs be illuminated individually? can you either switch off one or many bulbs or unscrew them so only 1 or two are on at a time?

A: Although each socket cannot be switched on/off individually, you can remove as many bulbs as you wish and still operate the light. Personally, I switch between setups with two 64W CFL bulbs and two empty sockets, and setups with four 26W bulbs and both work perfectly (have been doing so for about a year). To make things even easier, the white section on the softboxes are removable, so switching out bulbs for a different color balance or different bulbs is easy. I hope that answers your question!

Q: 10. Do the lights get hot? or are they cool bulbs?

A: I would say cool . Now, I usually use gloves to unscrew, as they are slightly warm to the touch but I must say I use the gloves more to protect the bulb because I heard years ago it's better not to allow the oils from your fingers to coat these types of bulbs. Plus if I happen to apply too much pressure unscrewing, bulb will not shatter in my hand. Use of this kit has been critical in the videography business. Definitely do not regret this purchase.