This ALZO 24' Switched Cord for China Ball Lights (2-Pack)from ALZO 24' Switched Cord for China Ball Lights (2-Pack)can be used as a spare or replacement for the switched lighting cable that came as part of the ALZO LED China Ball Overhead Light. The cable is white with a length of 24' and an on/off switch 6' from the plug end. It has a grounded 2-pin US plug, and an E26/E27 bulb socket on the other end. This set of two cables includes four T-bar ceiling hooks for supporting the cords from ceiling frames.

Grounded US 2-Pin Plug    E26/E27 Lamp Socket    All White Design    24' Long, On/Off Switch 6' from Plug

110-240V

100W

SPT-2, 18AWG

Related Questions and Answers

Q: 1. Would this work with the Rode VideoMic NTG TRRS output (allowing you to record the signal in addition to the safety track separately) with any mixer with XLR inputs?

A: The adapter has a female 3.5mm TRS connector, so to avoid the possibility of any issues with compatibility, it would be better to use a TRS cable instead of the TRRS cable since the auto-sensing feature may not work properly when connecting to an adapter rather than directly to a mic input. For a standard TRS cable, you could use the Rode SC2 Right-Angle 3.5mm TRS Coiled Patch Cable (B&H # ROSC2). As an easier solution, you can use a single Y-cable with 3.5mm TRS and left/right XLR connectors like the Kopul Y-Cable with 1/8" TRS Stereo Mini to 2 XLR Male Connectors - 3' (B&H # KOSMYCM2XM03) or Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 3' (B&H # HOHMX003Y) or Hosa Technology Stereo Mini-Phone (3.5mm) Male to 2 XLR Male Y-Cable - 6.6' (B&H # HOYCSMM2XM6). All of the Y-cables are available in longer lengths. The single Y-cable ensures a proper left/right split and helps to avoid introducing noise into the signal.

Q: 2. How many hours does it take to charge fully

A: According to the manufacturer, these batteries take 6 hours to charge.

Q: 3. I just received this battery and the charger but I do not have a power cord. Do you have a cable I can purchase or any other solutions? Thanks!

A: This unit does not need a cord. It plugs directly into the wall outlet.

Q: 4. Will they work with a conventional house dimmer? if so, do they dim to a nice low level or do they stay at 15-20%?

A: Hi Samuel, unfortunately, we can't guarantee that they will work with a conventional dimmer. Our experience is that if they work, dimming is not consistent as the conventional dimming circuits are designed for low-impedance lights that use Tungsten/incandescent bulbs. What works for some people is to use one Tungsten bulb on a circuit, combined with LED bulbs. The best solution for dimmable LED bulbs is to install a new dimmer switch designed for LED bulbs.

Q: 5. would this work with the Fuji xt3?

A: Yes this will fit the PC socket of the camera

Q: 6. How fast does the charger included charge the batteries?

A: Takes about 10 hours from 20% to fully charged.

Q: 7. Would this work with a Yashica MAT LM?

A: No

Q: 8. How many watts can this socket take?

A: The socket can handle up to 250 watts.

Q: 9. If I connect the 3.8mm to a Hollyland Lark Max, and the XLRs into an Ursa Mini Pro, will it split the left and right signals?

A: If the Hollyland Lark Max receiver is set to stereo mode, then the ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord will carry left and right signals on the first and second XLR outputs respectively. If it is set to mono mode, the same mixed signal will be carried on both XLR connectors.

Q: 10. Will this work with my stereo clippy mics which end in a 3.5 male trs to be able to use the xlr inputs for my MixPre6?

A: The ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord for Pro Camcorders is compatible with stereo microphones which use a 3.5mm TRS connector.