Hawk-Woods Vl-Ca9 V-Mount For Blackmagic Ursa

Hawk-woods Vl-ca9 V-mount For Blackmagic Ursa

Product Code: eq123849
Availability: In Stock

$799.80 $1,231.69

Qty

7 reviews Write a review

Description
Reviews (7)

This Hawk-Woods VL-CA9 V-Mount for Blackmagic URSAfrom Hawk-Woods VL-CA9 V-Mount for Blackmagic URSAoffers the user greatly extended run-times. The VL-CA9 attaches to the camera body via the fitting points on the URSA providing the electrical connection through the camera's 12-pin connector. The VL-CA9 fitting offers three D-Tap and two Hirose output allowing the user to power further accessories/equipment.

Regulated 12V Outputs support 6A Total

Key Specs
Camera Power Method	Connector
Plate Front / Battery Mount	V-Mount
General
Camera Power Method	Connector
Inputs/Outputs	3x D-Tap 2x Hirose 4-Pin
Plate Front / Battery Mount	V-Mount
Number of Battery Bays	1
Dimensions	5.3 x 3.3 x 1.3" / 13.5 x 8.5 x 3.4 cm
Weight	8.5 oz / 240 g
Packaging Info
Package Weight	0.64 lb
Box Dimensions (LxWxH)	7.4 x 5.8 x 2.1"

Outputs on this adapter are regulated to 12V
The regulator supports 6 amps
This product will also fit the URSA MINI

Related Questions and Answers

Q: 1. Does this battery plate work with the Ursa Mini Pro 12K? That camera is not mentioned in the compatibility section

A: Yes. Works with the 12k unit.

Q: 2. does this plate charge the battery?

A: The plate does not charge the battery, all it does is allow you to be able to mount V-mount batteries onto the Blackmagic URSA. It does have a D-Tap port for accessory power however.

Q: 3. Does this battery plate work with the SSD recorder (the one also made by BMD)?

A: Yes it does, I use it with mine and have no issues

Q: 4. Do I need to plug the mount to camera with d tap or battery plugs up to camera directly? I am new to Ursa , it says no cord needed in description. Please help

A: The connector is on the plate itself, it should just connect directly to the back of the URSA camera.

Q: 5. Works it for Mini Ursa 4.6k or only Mini Ursa Pro?

A: There are 2 Blackmagic Design B4 mount models. The URSA Mini Pro B4 Mount model is only for the URSA Mini Pro. And the URSA Mini B4 Mount is only for the URSA Mini 4K PL and URSA Mini 4.6K PL camera models.

Q: 6. Will this work on the Ursa Mini 4K?

A: No, the URSA Mini 4K EF camera doesn't have an interchangeable lens mount. The URSA Mini 4K PL camera model can only be interchanged with the URSA Mini B4 Mount.

Q: 7. Are the shims included the same as the kit in accessories? If not how many are included?

A: Yes they are including the 9 shim kit.

Q: 8. I assume this has a 12-pin Molexconnector n the back but there are no pictures of the back and no mention in the description. Does this have the Molex?

A: Yes, the Blackmagic Design V-Mount Battery Plate for URSA has a Molex connector on the back.

Q: 9. Will this battery mount work with the BM 12k Cinema camera?

A: Yes, the Blackmagic Design V-Mount Battery Plate for URSA will support and work with the Blackmagic URSA 12K.

Q: 10. Will a HD 2/3'' B4 mount lens work with no vignetting on the Ursa Mini Pro using this mount?

A: Yes in windowed HD mode.

Paul	14/09/2024
[V-Mount] I was looking for a small, low profile power system to power my Sony A7Sii, monitor, follow focus and wireless transmitter. I bought this with the Hawk-Woods 98Wh and 150Wh Mini V-Mount batteries. Since the plate comes with 4 built in D-Tap receptacles I am able to have one small but powerful battery source for everything. The plate also takes my full size V-Mount batteries should I need them in. 5

Daniel	04/08/2024
[1] Honestly I just got it and I'm positively shocked at what a great idea this type of rigging is and how well it seeems to take weight. I've got Hytron batteries on it which are INCREDIBLY heavy and while I wouldn't recommend doing it too much just knowing it can take it in a pinch is great. Great build quality. A idea, A execution 5

Andrew	28/07/2024
[1] Its a good and versatile slot receiver bucket tha will allow a quick add to my camera to expand its ability to receive more freqs. 5

Warren	13/07/2024
[V-Mount] Even though it seems to be of a design that may fail, I have used it non-stop for two years of Production Sound for double system film sound recording and it has worked perfectly. I actually bought two of them in case one failed, but so far I have only used one. It is much better than the one made by Sound Devices, because it has a lower profile when fitted with an XL-B3 battery pack. A professional will pay attention to what they are doing when inserting and removing this, and will never have problems! 5

Ayatullah	11/07/2024
[Connector] This should be the standard battery sled for the Mixpre ii. I don't know what Sound Device is thinking when they design the AA battery sled. Huge design failure!. Keep falling and never securely locks. I like this sled better (Sound Device has one too). And when using it with Sony NP-F7XX, it last up 8+ hours (4 times longer than AA battery), and I'm sure it will last up to 12 hour (6 times longer) when using Sony NP-F9XX. The only cons is it's super thight. Don't use it if you plan to remove the sled very often. I suggest use USB-C port for file transfer when using this. 5

Mako	08/07/2024
[Connector] Using this with the Atomos Shinobi 7 and 3 different Gold mount batteries. Build quality is great and the batteries latch in nicely. Just plug in the cable before sliding the receiver plate onto the back of the monitor. The 3 batteries I am using with this - Indi Pro Tools Micro-Series 98W, Core SWX Hypercore NEO Slim 98Wh, and an official Anton Bauer Digital Series 90 Gold Mount Battery 87Wh. 5