Aruba 100G Qsfp28 Lc Lr4 Single-Mode Transceiver

Aruba 100g Qsfp28 Lc Lr4 Single-mode Transceiver

Product Code: eq123918
Availability: In Stock

$109,146.00 $169,176.30

Qty

10 reviews Write a review

Description
Reviews (10)

Quickly complete your installation with the Aruba 100G QSFP28 LC LR4 Single-Mode Transceiver. Designed to work with select Aruba switches, this 100GBASE-LR4 QSFP28 transceiver supports LC single-mode 2-strand fiber cables, transferring up to 100 Gb/s with a range of up to 6.2 miles.

For Select Aruba Switches 100GBASE-LR4 QSFP28 2-Strand Transceiver LC Single-Mode Connector Up to 6.2 Mile Range Up to 100 Gb/s Throughput

Key Specs
Form Factor	QSFP28
I/O	1x LC
Maximum Data Rate	100 Gb/s
Mode	Single-Mode
Parameters
I/O	1x LC
Networking Technology	100GBASE-LR4
Maximum Networking Distance	6.2 Miles / 10 km
Maximum Data Rate	100 Gb/s
Mode	Single-Mode
Dimensions	5.2 x 0.7 x 0.3" / 13.2 x 1.8 x 0.8 cm
Weight	1.6 oz / 45.4 g

Related Questions and Answers

Q: 1. Will this work with nikon D300 and Canon 5D Mark II? and will this work with ellichrom and bowens flashes?

A: Yes but you will need one for the camera and one for each light or power pac

Q: 2. Will these work with portable strobes (norman 200c, quantum turbo) that are not ac powered?

A: The PocketWizard Plus X Transceiver Radio Remotes are compatible for use with all industry standard hot shoes, PC sync terminals, 1/4 phone, 1/8 (3.5mm) miniphone, 2.5mm sub-miniphone, household plug, etc. camera/flash connectors. It also uses safe 3 volts sync voltage for modern digital camera systems, and can handle up to 300 volts. As both the Norman 200C and Quantum standard QFlashes both use household sync terminals, the PocketWizard MH1 Miniphone to Household Cable - Straight - 16 (40.6 cm), B&H # WICHHM16, would be the correct cable compatible for use with the Norman 200C and Quantum QFlash T5D-r or X5D-r flashes.

Q: 3. My question is will the pocket wizard plusx work with elinchrom D-lite 400w/s RX-4?

A: Carlos,It should trigger your strobes. You will need the Pocketwizard cable designed for your equipment. You can find their information on Pocket Wizards site, then order it through B&H

Q: 4. I want to to control 2 speedlights using a film camera, how is that works?

A: To wirelessly trigger two (2) off-camera speedlight flashes using the PocketWizard PlusX 2 Pack with a film camera with a hot shoe (or PC sync terminal), you would need a total of three (3) PocketWizard PlusX transceivers; one is needed on the camera's hot shoe (or connected to the camera's PC sync terminal) to communicate and wirelessly trigger the two (2) off-camera speedlights. If you need an additional PlusX transceiver. the PocketWizard PlusX Transceiver, B&H # POPWPX, would be a single unit sold separately. While you did not specify which camera or which speedlights you own, if you own speedlights that have a built-in PC sync terminal, you may use the included cables to connect the PlusX transceiver to your flashes. However, if your flashes do not have a PC sync terminal, you may purchase an accessory such as the PocketWizard HSFM3 Flash Sync Cable (3'), B&H # POHSFM3, to connect the PocketWizard PlusX transceivers to your speedlight flashes.

Q: 5. Do you have CE version instead of FCC in stock? thanks!

A: Unfortunately not. The only PocketWizard units sold in the USA are of the North American (FCC) frequencies.

Q: 6. Does it works mounted on Pentax K3 ?

A: I don't use Pentax camera so I can't say with certainty whether this unit would work when paired with the K3 or not. Theoretically it should work with many SLR cameras.

Q: 7. Are the dual 3.5mm plugs compatible with PC?

A: Although this Williams Sound MIC 057 Single-Muff Headset can work for use with a computer, you would only hear one channel of the audio, instead of the full stereo sound. For most use with a computer, a Logitech headset like this one is going to be a better option: https://bhpho.to/3IeGrAx

Q: 8. To transmit DMX wirelessly do I need one of these to transmit and a second one to receive?

A: You will need one LumenRadio Aurora Single Universe DMX/RDM Transceiver with Wi-Fi and Bluetooth BH #LULRINAMF1 as a transmitter and one to receive.

Q: 9. Will this work mounted on a Sony A7R / A7S to trigger a Canon 600EX-RT Flash ? Can it also adjust the flash output remotely? Thank you !

A: The Plus X will mount to either of your Sony cameras. You'll need a second unit connected to your flash (even the Canon 600) though. You can not adjust the output of the flash from your Sony with the Plus X. You would need to use a Canon camera and a different PocketWizard system for that.

Q: 10. Does this model include the QSFP+ optical module ? Also, we have Intel 40Gb/s XL710-QDA2 , will the cable that plugs into it, plug into this ATTO card ? Or will we need to change the cable ? Regards

A: This module uses SFP28, which is cross-compatible with SFP+. However, SFP28 supports a speed of 25 Gb/s with higher bandwidth than SFP+, so although it will work with an SFP+ connection you will not realize the full capabilities of SFP28.

Robert	28/07/2024
[1x LC] A must for your tool box 5

John	15/07/2024
[1x LC] For Tactical fiber cables, these are ultra light weight, but they do take a beating! Great Cables! 5

Tim	08/07/2024
[100 Gb/s] We use this to get audio/video to the front and back of large conference rooms, works great. The cable is only as thick as a single regular XLR cable. 5

William	14/06/2024
[Single-Mode] Really, there's not much you can say other than I plugged each into an SFP port and they work absolutely perfectly. These are especially useful in a situation like mine where one end is a media converter and the other is a Ubiquiti router with an SFP port (EdgeRouter 4.) It works as you would expect with no discernible speed penalty compared to just a straight Gigabit Ethernet cable. I installed mine to provide galvanic isolation between my cable modem and my home network so I need not worry about lightning strikes on my coaxial cable. Highly recommended and you cannot beat the price. 5

Shaun	28/05/2024
[100GBASE-LR4] We pulled it through 3/4 conduit and it worked out great. We used a mesh so that the ends wouldnt have any tension when we pulled. We ended up connecting two of these in a dry location with couplers. Still working fine after a year. 5

Jeffrey	25/05/2024
[Single-Mode] What a great value! And great quality! The only negative is I wish there was some support for the dangling connectors while installing. 5

John	11/05/2024
[1x LC] While I wasn't a fan of the cost at first, this is certainly a product where we are getting what we paid for. Cars and trucks of all sizes run over these cables all the time while we are trying to set things up, and after a year, the cables still look new- no signs of damage or even wear. They have sat outside for over a month at a time, in the rain and snow (minus the ends), and they just work great. 5

Michael	29/04/2024
[100GBASE-LR4] The installation went smoothly, the software has worked as expected, and I hope to see if it performs at the rated capacity. So far, so good. 5