You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Hawk-woods V-lok Dual Battery Belt V-mount

Hawk-woods V-lok Dual Battery Belt V-mount
  • Product Code: eq123922
  • Availability: In Stock

$911.40 $1,330.64

The Hawk-Woods V-Lok Dual Battery Belt V-Mountfrom Hawk-Woods V-Lok Dual Battery Belt V-Mountis a high-quality leather battery belt manufactured in the UK by Hawk-Woods. V-Lok battery plates allow the user to attach V-Lok or V-Mount type batteries and utilize it as a waist-mounted power source. Very handy for powering your equipment on locations, ideal for maneuverability. This battery belt will allow the use of two V-LOK/V-Mount batteries. These batteries will run in parallel so you will have combined wattage at nominal battery voltage. Power out can be taken from the XLR4 chassis mount on the camera fitting.

1 x 4-Pin XLR Output    2 x D-Tap Outputs

Parameters
Power2 x V-Mount
Power Output1 x 4-Pin XLR
2 x D-Tap

Related Questions and Answers

Q: 1. Would this work with Hedbox NPF97 mounted on the SmallRig 3204 to power my Blackmagic Pocket 4K and Portkey PT6 monitor?

A: The Nanlite 15V Dual NP-F Battery Adapter with V-Mount has not been tested in this specific situation. But it should work with Hedbox NPF97 mounted on the SmallRig 3204 to power my Blackmagic Pocket 4K and Portkey PT6 monitor.

Q: 2. Will this work with the sony a7s and can it also, simultaneously, power an Atomos Ninja Assassin? If so, what other connectors or accessories will I need?

A: I was not able to find a 12v cable for this to connect to an a7 camera. If such exists, you could then power the Ninja through the d-tap on the Switronix GP-S/12 V-Mount Plate with Belt. You might consider this other v-mount plate that has a a7 dummy and a d-tap. However, it is 15mm rod based, not a belt plate.

Q: 3. What light is this suitable for? Will it work with PavoTube 30C?

A: This is for the Nanlite Forza 60/60B lamp heads. For the Pavotube 30C, you may use the Nanlite D-Tap to 5.5mm Male DC Barrel Power Cable, BH # NACBDTDC which connects to any V-mount or Gold Mount battery that has a D-Tap connection. https://bhpho.to/30pooEi

Q: 4. Can you power stuff through the v-mount? Or just the dc output.

A: There are 2 different ways to power with this unit. You can power directly from the V-Mount connection from the back of the plate or through the 2.5mm output jack that is located on the side. You will just need the 2.5mm connector cable to power your specific device/camera.

Q: 5. Can I charge any brand of v-mount batteries with the LP2 or that charger can only be used with Anton Bauer batteries?

A: Anton Bauer can not guarantee results with any other brand V mount batteries. Most V-Mount batteries have firmware that communicates with their respective chargers to maintain the health of the battery. When you mix and match brands the battery firmware is not able to communicate with the charger because they are made by 2 different companies. This may prevent the battery from charging, or prompt the battery to stop charging prematurely, or it might not affect the battery at all. For the best and most consistent results we recommend using batteries and chargers from the same manufacturer.

Q: 6. Will this work with the V-mount of the 1024 CAME-TV light?

A: I would not recommend this product for this purpose because you will need an option that can supply the high wattage that those LED panels require. Rather, use conventional V mount batteries such as these that have a higher draw rating: Watson Pro 14.4V 98Wh Slim High-Load Li-Ion Battery Kit with D-Tap Charger (V-Mount) (B&H# WACSPT98SHLB) https://bhpho.to/2PgZnp7

Q: 7. Can it be used to charge the battery, if connected to a v mount charger?

A: The Nanlite 15V Dual NP-F Battery Adapter with V-Mount BH #NABTBASNPV cannot be used to charge NPF batteries.

Q: 8. Does this support all brands of vmount batteries or just indiPro?

A: This product supports all brands of V mount batteries.

Q: 9. Can I charge an Anton Bauer Dionic 90 Battery with this charger?

A: Your battery may or may not need a chip upgrade to be compatible. Please contact Anton Bauer Customer Service so that they can determine your batteries compatibility. servicesupport@vitecgroup.com +1 800 541 1667.

Q: 10. Is this compatible with the Small HD Cine 13 field monitor?

A: Yes, the SmallHD 14V/26V Dual Battery Bracket (V-Mount) is compatible with the SmallHD Cine 13 UHD 4K High-Bright Monitor.

16/09/2024

[2 x V-Mount] This is NOT Velcro! Its one strip and it sticks to itself when you press the pieces together. The glue on the back is quite strong. The teeth on the strip are deeper than Velcro.

The material is very stiff, suitable for holding items of moderate weight. If you want to hold light wires together, use something else.

I will probably want more of this.

5
14/09/2024

[2 x V-Mount] This adapter could be sold by dozens if it was better marketed. It is a fantastic idea for anyone with on set monitors (focus pullers, camera ops, video village) . Worth EVERY penny. Hot swap is the bomb.

5
04/09/2024

[2 x V-Mount] This should be the standard battery sled for the Mixpre ii. I don't know what Sound Device is thinking when they design the AA battery sled. Huge design failure!. Keep falling and never securely locks.

I like this sled better (Sound Device has one too). And when using it with Sony NP-F7XX, it last up 8+ hours (4 times longer than AA battery), and I'm sure it will last up to 12 hour (6 times longer) when using Sony NP-F9XX.

The only cons is it's super thight. Don't use it if you plan to remove the sled very often. I suggest use USB-C port for file transfer when using this.

5
29/08/2024

[2 x V-Mount] Adds record start/stop functionality in addition to lens power in conjunction with XDCA-FS7 camera adapter.

5
25/08/2024

[2 x V-Mount] I use this with a MixPre-3 and a hirose-to-d-tap cable.  Works as expected.  Its awesome to be able to power the MixPre off camera battery.  Would buy again.


Only suggestion I have is that if you do use this to power your MixPre, and if you feed a signal back into your camera (i.e. not just record to the MixPre, but also send a scratch track signal from the MixPre to the camera), then you will want to get a ground loop isolator to put in your signal chain.  Otherwise the in-camera scratch track will have interference noise.  (The internal MixPre recording remains pristine.)

5
22/07/2024

[2 x V-Mount] Even though it seems to be of a design that may fail, I have used it non-stop for two years of Production Sound for double system film sound recording and it has worked perfectly. I actually bought two of them in case one failed, but so far I have only used one. It is much better than the one made by Sound Devices, because it has a lower profile when fitted with an XL-B3 battery pack. A professional will pay attention to what they are doing when inserting and removing this, and will never have problems!

5
07/06/2024

[2 x V-Mount] Using this with the Atomos Shinobi 7 and 3 different Gold mount batteries. Build quality is great and the batteries latch in nicely. Just plug in the cable before sliding the receiver plate onto the back of the monitor.

The 3 batteries I am using with this - Indi Pro Tools Micro-Series 98W,
Core SWX Hypercore NEO Slim 98Wh, and an official Anton Bauer Digital Series 90 Gold Mount Battery 87Wh.

5
03/06/2024

[2 x V-Mount] I was looking for a small, low profile power system to power my Sony A7Sii, monitor, follow focus and wireless transmitter. I bought this with the Hawk-Woods 98Wh and 150Wh Mini V-Mount batteries. Since the plate comes with 4 built in D-Tap receptacles I am able to have one small but powerful battery source for everything. The plate also takes my full size V-Mount batteries should I need them in.

5
23/05/2024

[2 x V-Mount] Love being able to attach a V-lock easily to Inferno!

5
16/05/2024

[2 x V-Mount] Velcro works, but dual -lock is much more stable. I trust it with objects like a Teredek.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Hawk-woods V-lok Mini Battery Belt Dual Fittings

$1,209.00 $1,474.98

Hawk-woods B-lok 26v B-mount Battery 98wh

$1,289.97 $1,586.66

Hawk-woods V-lok 48v 4-way Converter V-mount

$1,785.60 $2,232.00

Game Of X V.1 Xbox - Focal Press

$188.85 $300.27

Fotodiox Pro Popspot 50 V.2 Zoom Lens

$419.85 $575.19

Spots Gaffers Control V.2 Dmx Controller Stormcase

$12,252.15 $18,990.83

Hawk-woods Mini V-lok Camera Mount 2 D-tap

$725.40 $884.99

Hawk-woods Mini V-lok Mount For Red Komodo

$985.80 $1,577.28

Products You May Like

Eschenbach Optik 10x25 Club B Binoculars

$1,379.10 $2,206.56

Vizrt Nrs16 16-bay 32tb Hdd Expansion Chassis

$105,000.00 $136,500.00

Tiffen Glimmerglass Filter 77mm Grade 1/4

$359.97 $489.56

Dell Latitude 5540 15.6" Notebook

$3,929.85 $6,287.76

Da-lite Motorized 16:10 Projection Screen 120"

$38,416.80 $53,783.52

Portabrace Xl Hard Case With Removable Soft Case

$1,025.85 $1,528.52

Ikelite 200dlm/b Housing For Panasonic Lumix Gx9

$2,685.00 $3,356.25

Shure Dh5 Omnidirectional Headset Mic Cocoa Ta4f

$1,197.00 $1,759.59

Heliopan Bay 104 Dark Yellow Glass Filter

$1,049.85 $1,658.76