The CameraRibbon QRC Shoulder Rig for Canon C100, C200, C300is a lightweight and compact padded shoulder support. The support is made from a single strip of 2" wide and 1/8" thick aluminum strip. The QRC rig takes the strain off the camera operator's wrist, hands, and back with a counterbalanced and padded shoulder support. It features a sturdy 1" diameter, solid aluminum, rubber-covered handgrip. A small vinyl-covered lead counterweight is mounted low on the back of the support for counterbalance.

The rig's design allows four points of contact with the operator for stable handheld shots while maintaining a comfortable and balanced posture for the videographer. The included standard-length quick release plate features a 1/4"-20 mounting screw. The QR plate adapter (mounted on the support) features a locking lever, safety release, and two accessory mounting points—one 1/4"-20 and one 3/8"-16. The QRC includes hook-and-loop adhesive so you can attach a wireless microphone system to the rig. The included counterweight balances the camera on the rig; an available second counterweight can be added to counterbalance heavier loads such as when using accessories.

Simple One-Piece Camera Support    Counterbalanced Padded Shoulder Support    One-Piece 1/8" Aluminum Construction    Vinyl-Covered Handgrip    Quick Release Plate Included    2 x Wireless Microphone Attachments    Included Counterweight

Simple, one-piece camera support

Designed for use with Canon C100, C200, and C300 cameras

Counterbalanced padded shoulder support

One-piece 1/8" aluminum construction

Quick release plate included

Rubber-covered handgrip

Designed for long handheld ENG-style shoots

Wireless microphone attachment

Made in the USA

Related Questions and Answers

Q: 1. What do I need to use this either with a C100 mark II or a 5d mark IV?

A: Hello JimThank you for your question! For the C100 Mark ii, you do not need anything else than this rig. The main baseplate of this shoulder mount was specifically designed for the Canon C series cameras (C100-C300-C500). So it should fit fine. As for the 5D Mark IV, if the optical center is not an issue, it should be ok, if it is, you can still use it but adding accessories like a mattebox might be a bit tricky.For more detailed info, please call us at 1.888.968.9810We hope this answers your questions and we thank you for your interest in our products.The SHAPE team

Q: 2. What follow focus accessories are needed to have a complete follow focus set up along with this (for c200)?

A: Most 15mm rod applicable follow focus units will work, as these can be mounted on the standard 15mm rod of this unit.

Q: 3. What's the main difference between this and the Shape Offset Rig?

A: The difference between this product and the Offset Version, which is B&H # SHC100OF, is the Offset configuration itself. The Standard Version has 2 longer 15mm rods that go straight from the handles to the shoulder pad. The offset rig has two shorter sets of 15mm rods and an offset bracket. Some prefer the offset design because it puts the camera directly in front of your eyes for use.https://bhpho.to/2b1Xcio

Q: 4. Can I relocate the remote handle to the handles on the shoulder mount?

A: Hello! Thank you for your question! You can indeed remove the rubber handle on the unit and insert the C300 bracket designed to attach the remote handle of the camera.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 5. Will this work with a RED Raven?

A: Hello Micheal, thank you for your question. The RED RAVEN can be mounted on this rig. However, since it has been developped specifically for the CANON C-SERIES and its specific optical center, you may experience some difficulties to fit accessories on the front rods like a matte box. There is a difference of approximately 20mm between both camera optic center. I hope this answer will help you make a choice. Best regards,

Q: 6. Does this work with C100?

A: Yes, this baseplate should work with a C100 as well as the C300.

Q: 7. Do you need a counterbalance if you're not using a battery brick?

A: That will depend on how you set up the C200 and if that set up makes the rig front heavy. Here is a 1.8 pound counter balance from Lanparte that attaches through 15mm rods. https://bhpho.to/36XEv9W

Q: 8. Will this rig work with a C100 AND a C300 Mark ii?

A: Hello Julia,Thank you for your question! The baseplate in this rig was not designed for the C100 and C300 MKii. It was designed to fit the C300 mark i. It can work, but won't be ideal and might not respect the optical center of those cameras. For instance, the C300 mark ii is a bigger camera, so if you want to add a mattebox, it might not be centered. At that point, we cannot guarantee it will fit perfectly. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 9. Wondering if a c200 would work on this rig as well? I have a c100 and want to upgrade to a c200 but have several projects that will happen before that upgrade, wondering if this would fit both just fine or if I'd need to make a switch.

A: Hello Philip, Thank you for reaching out to us! This particular setup was initially designed for the C100/C300/C500. Installing a C200 might result in a setup where the optical center of the C200 won't be exact if you install accessories in front of your lens. We suggest you take a look at our C200 products to see what options are available. https://www.shapewlb.com/camera-rigs-for-canon-c200/. We hope this helps and we thank you for your interest in our products. The SHAPE team.

Q: 10. Does this rig fit the C70 camera as well?

A: This cage on this rig is designed to match the shape of the C200 which is significantly larger than the C70. The C70 will mount on the rig but the cage will be too large for the camera.