Quasar Science Snapgrid Snapbag Softbox Ossium Frame 4' 40°

Product Code: eq124244
Availability: In Stock

$1,950.00 $2,574.00

Qty

9 reviews Write a review

Description
Reviews (9)

This 40° Quasar Science Snapgrid Snapbag Softbox Ossium Frame 4' 40°from Quasar Science Snapgrid Snapbag Softbox Ossium Frame 4' 40°measures 4' and snaps open for use as its name implies. It mounts directly to the Snapbag softbox via touch-fasteners to narrow the light's beam spread, eliminate spill light, and provide the directional control necessary for selective lighting. The grid has a semi-rigid design and is made from pre-stretched, fireproof fabric with a stainless steel frame. It folds flat when not in use and stows in the included carry bag.

Mounts Directly to Snapbag Adds Directional Control Enables Selective Lighting Snaps Open in Seconds, Folds Flat Controls Spill, Narrows Light Beam

Key Specs
Item Type	Snap-Open Grid for Softbox (Rectangular Shape)
Grid Angle	40°
Dimensions	64.2 x 26.4 x 3.1" / 163.1 x 67.1 x 7.9 cm
Parameters
Attachment Method	Hook & Loop
Grid Angle	40°
Softbox Required	Yes
Materials	Fabric
Dimensions	64.2 x 26.4 x 3.1" / 163.1 x 67.1 x 7.9 cm
Weight	2.2 lb / 1.0 kg

Related Questions and Answers

Q: 1. Would the ARRI DoPchoice SnapGrid 40° for SnapBag S60 fit on this? It says it is 35 x 24 And DoPchoice is the same company.

A: The ARRI DoPchoice SnapGrid 40° for SnapBag S60 will fit on the TRP WORLDWIDE Snapbag for Aputure Nova P300C because the fronts are the same size.

Q: 2. Can I use this box on my Elinchrom BRX light?

A: This is the fabric grid for the Broncolor 30x180 softbox. Broncolor softboxes can be attached to Elinchrom flashes via the Broncolor Speedring for Elinchrom Flash Systems B&H # BRSRE MFR # B-33.401.03

Q: 3. What are the dimensions of this light? I'm trying to find a case to put a few of them in.

A: Unfortunately, the manufacturer does not list the dimensions of the Quasar Science Q10 Q-Lion Switch Lithium-Ion Linear LED Lamp (12"). However, I would estimate it is approximately 12 inches (30.48 cm) in length, and approximately 1 inch (2.54 cm) wide, and approximately 1.5 inches (3.81 cm) tall

Q: 4. Does it come with the USB charger pictured?

A: Yes it does

Q: 5. What is the Lux at 3.3 ft?

A: The manufacturer does not specify the Lux rating of the Quasar Science Crossfade X Linear Bi-Color LED Light (US, 4') BH #QU9212303.

Q: 6. Does it come with a carry case?

A: No case included only on the sets with a hard case

Q: 7. Can I power this from the USB port of a 14.8V V-Mount battery?

A: # QUQLIQC3CMUC is recommended

Q: 8. Is the shaft diameter 7mm or 8mm?

A: This has 8mm shaft

Q: 9. What are the dimensions of the front diffuser for this softbox? There are two different measurements provided in the description.

A: The unfolded dimensions of the TRP WORLDWIDE Full Grid Cloth Diffusion for Snapbag (35 x 24"), B&H # TRSBCFNSF, included with the purchase of the TRP WORLDWIDE Snapbag for Aputure Nova P300C is 35" x 24" in inches (90 x 60 cm).

Q: 10. Are these compatible with T8 Dimmable lights from Quasar, or just the T12 Crossfades?

A: According to the manufacturer, the Quasar Science Cluster Power Adapter for 4 Linear LED Lamps with 3-Pin Grounded Plug is not compatible for use with the Quasar Science T8 Dimmable LED Lamps. The Quasar Science Cluster Power Adapter is only for use with their Crossfade lamps.

Peter	16/08/2024
[Yes] This is a must have for the Snapgrid Octa box. I’ve fit it several times and the grid is always about 1-2 inches too big. It still works just fine, but not sure if it was measured wrong. Cuts spill light by 40 degrees. Works great!! 5

Greg	09/08/2024
[40°] Really nice grid for a 4’x4’ frame. Attaches well by the corners and does what it’s suppose to in controlling light. Really looking forward to using this tool more over the year. 5

DSH	03/08/2024
[40°] I've been using a pair of these with Astera Titan's - SNAPGRID does make a version that fits those tubes more appropriately but I do like the fact that I can use them with quasars and kino flo tubes if I wanted to. I also have two Honeycrates that are made specifically for the Astera Titans - they too are great! Now, I actually prefer each for different reasons. With the SNAPGRID if feels much more rigid and the dividers keep their shape better. I have to do a test to be sure, but I felt like the SNAPGRID, because of it's better rigidity, helped to keep exposure levels higher. This could entirely be in my mind, only doing a meter test will reveal - but the Honeycrates felt a little more loose. 5

Ian	16/07/2024
[Fabric] I'd held off buying one of these because they are so pricey - by the time you've added the modifiers an Astra is an expensive light. But it's a really great way of controlling spill and I'm happy I got it eventually. Stays in the kit box! 5

Spencer	05/07/2024
[Fabric] When you need the control and don’t want to waste time with lots of flags this is just the ticket, fast and easy good price too . 5

Robert	25/06/2024
[Yes] Very high quality product, comes with a nice case and is the perfect grid diffuser for my tubes 5

Amilcar	15/06/2024
[Yes] Just as durable as the Litepanels brand. Thanks to the B&H team for pointing me in the right direction 5

Seth	06/06/2024
[Yes] These are simple to install and work perfectly for mounting t12 lights. 5

Alison	24/05/2024
[Fabric] These are perfect for my quasar lights i use these on my crossfades and my rainbows. you can screw these into anything and make your own mounts. i have them double stacked with a baby plate. 5