Add a durable quick release plate to your camera rig with this Candreva Plate-3 Quick Release Plate for Camerasfrom Candreva USA. The aluminum, 120mm full-size quick release plate fits tripod heads such as OConnor 2575, Ronford Baker RBQ, or Sachtler 7+7.

The plate features a center slot and two 3/8"-16 locating screws to ensure it stays secure in its mount. There are storage threads milled into the plate for your camera screws. Bar code slots are machined into the plate for rental house use. A hex wrench is included to tighten the locating screws.

Full-Size 120mm Quick Release Plate    Includes Two 3/8"-16 Locating Screws    Center Slot, Screw Storage Threads    Includes Hex Wrench    Bar Code Slots for Rental Houses    Durable Aluminum Construction

Related Questions and Answers

Q: 1. I have a Nikon 200mm f4 Micro Lens... will a P20 Quick Release Plate by Wimberley work with my Wimberley Gimbal Version ll?Does the P10 Quick Release Plate by Wimberley use two screws for attachment to my Nikon 200mm f4 Micro Lens?

A: According to Wimberley's plate compatibility chart, the P10 would be the ideal plate for your Nikon 200mm f/4.Micro. Both the P10 and P20 will work with the Wimberley Gimbal Version ll, and will include safety stop screws to prevent loosening of the plate. These will be separate from teh 1/4-20 screw that is also included with each model.

Q: 2. Can I attach my canon EOS 5D mark III to this?

A: I do all the time on my 5D MIII. You just have to move the plate around for the pin to fit.

Q: 3. Will this fit the A7R2 and the A6400 ?

A: The Gitzo Quick Release Plate for Sony Alpha Cameras is designed for use with Sony's slightly larger a7-series and a9 Mirrorless Digital Camera. It may fit the a6400, but do note the a6400 has a smaller body size and the tripod socket is not in the same place as on the larger cameras, so tne Anti-Twist flange may not align properly, but it should fit on the camera. It will work on the Sony Alpha a7R II Mirrorless Digital Camera.

Q: 4. Is it compatible with RRS clamps ?

A: yes

Q: 5. Will this plate fit for Sony e mount 70-200mm lens on Really right stuff BH50 ball head?

A: I dont see why not. It works with all my heads

Q: 6. What is the length of this plate?

A: The length is not listed as it is designed specifically to work with GH03/GH06/GH08/GH10 Heads manufactured after 8/2015.

Q: 7. IS THE P-30 COMPATIBLE WITH CANON 400 MM F4 LENS?

A: Their website recommends a P-20 lens plate for the Canon 400 f/4 DO lens. They did tell me that you could use a slightly longer plate if you wish.

Q: 8. What is the best lens plate to use with the Nikon 200-500 lens and MeFoto road trip tripod?

A: The Wimberley website says to use the P-30 for the Nikon 200-500 lens. That is what I use and it works fine. The P-20 is for other lenses.

Q: 9. How long does the screw extend above the plate? I have a similar product from competitor but the screw is too short (about 4.2mm) to hold well on my Sigma 70-200.

A: Wimberley has created a reference guide for which plate is recommended for each lens, which can be found here: https://www.bhphotovideo.com/lit_files/356150.pdf According to the guide, the P10 is the recommended plate for the Sigma 70-200mm lens. Here is a link to the P10 plate: https://www.bhphotovideo.com/c/product/205333-REG/Wimberley_P_10_P10_Quick_Release_Plate.html?sts=pi&pim=Y

Q: 10. if i mount this on to my canon 70-200 f2.8L IS II on a ballhead, would I be able to fit the Vello CB-600 Straight Flash Bracket on the front of the plate?

A: At least my Wimberley quick release plate does not have threads in the (appropriate size) round holes that it has. Therefore I can not directly connect my (old Hama) flash bracket plate under it. I could connect it through the holes by using an additional bolt with washer and nut. (I hope I understood the intended configuration right.)