Bring efficient cooling and customizable lighting to your rig with the ASUS ROG RYUO III 360 ARGB Liquid CPU Cooler Whitein white from ASUS. Sporting a 360mm radiator, this cooler feature a pump speed of 800 to 2600 rpm. A copper heatsink and sleeved rubber tube offload heat to the aluminum heatsink. Designed for quiet and powerful cooling, three cooling fans support 4-pin PWM control and operate at a nominal speed of 2200 rpm.

Adjust lighting on the ARGB fans or configure the Anime Matrix LED display on the pump head to show off custom lighting patterns, system readouts, and more. The LED display and fans can be set and synced with compatible components via the Armory Crate utility. The ASUS ROG RYUO III 360 ARGB All-in-One Liquid CPU Cooler is compatible with AMD AM4, AM5, and TR4 sockets, as well as Intel LGA 1700, 1200, 1150, 1151, 1152, 1155, 1156, 1366, 2011, 2011-v3, and 2066 sockets.

360mm Radiator Size    3 x Cooling Fans    ARGB Fan & Pump Lighting    2200 rpm Fan Speed    4-Pin PWM Control    800 to 2600 rpm Pump Speed    Copper Heatsink    Aluminum Radiator    Compatible with Intel & AMD Sockets

This all-in-one liquid CPU cooler is compatible with AMD AM4, AM5, and TR4 sockets, as well as Intel LGA 1700, 1200, 1150, 1151, 1152, 1155, 1156, 1366, 2011, 2011-v3, and 2066 sockets.

An 8th gen Asetek pump comes equipped with a 3-phase motor, allowing the pump to deliver optimal cooling via higher flow and lower impedance.

The Anime Matrix is a mini LED array that can display ROG-exclusive anime content, core system stats, and customize animations. Ten exclusive ROG animations are available for you to cast through the Matrix screen. Select your favorite and customize the sequence or use the Pixel Editor to create your own. Or, install Armory Crate and display your choice of system temperatures, voltages, and fan speeds from the beating heart of your rig.

Customize the color and effects displayed on the ARGB fans and AniMe Matrix screen, and then synchronize them with a range of Aura-compatible system components to create a unified theme throughout your build.

Boasting three 120mm ROG ARGB fans, this AIO cooler is designed for quiet and efficient cooling. Each fan operates at a nominal speed of 2200 rpm and delivers up to 70.07 CFM of airflow at noise levels up to 36.45 dBA, ensuring adequate airflow for a range of workloads. Plus, set ARGB illumination to give your rig a color scheme that fits your style.

Related Questions and Answers

Q: 1. This mix uses water, correct ?

A: Yes it does

Q: 2. Will the software work in windows 7 ? Cuz 10/11 SuX !!!

A: The Asus Armoury Crate software is only compatible with Windows 10 and Windows 11.

Q: 3. is this safe/approved for checked in luggage on air flights?

A: Whether this is safe for checked luggage on a flight would depend on the airline you're using. It would be best to check with that airline for their specific regulations.

Q: 4. Do the drive bay trays come included?

A: Yes, this comes with everything you need to mount multiple drives.

Q: 5. Has anyone had good results processing Super8 or 16mm B/W film with this product?

A: The manufacturer only lists this chemistry as suitable for 35mm black and white films for stills.

Q: 6. Is the monobath for developing prints?

A: No, this chemistry is for use with film.

Q: 7. Is there any differences in developing time between 120 film and 35mm film ?

A: Assuming they are the same film, speed, etc... there should be no difference in dev times.

Q: 8. Is there any way I can split up my DF96 powder so that I can just mix up 300ml of liquid (I use a lab box so I only need 300ml at a time)? My developing tank is small so it would make more sense, than mixing up 1L at a time when I am only going to develop a few rolls.

A: I contacted the manufacturer concerning your inquiry about the CineStill Film DF96 Monobath for Black & White Film (Powder, to Make 1L). According to CineStill, they state they do not recommend dividing up the powder concentrates. Because there is a mixture of several powdered chemical components in these concentrates, each with their own grain size and weight, it's practically impossible to ensure that the chemical concentrations of all components will be accurate if divided by weight or volume, which could lead to uneven development. CineStill always instruct users to mix up the full 1000mL and re-use for up to 16 rolls within two months. Concerning your use of a Lab-Box, CineStill states you should mix up the full 1000mL volume using all of the powder concentrate, pour 300mL from the chemical storage bottle into their Lab-Box, and then pour back into the chemical storage bottle, making a tally mark to indicate the number of rolls processed in the chemistry until they reach 16 or until the mixed chemistry is 2 months old.

Q: 9. Can a partial packet, ie 1/2, be mixed for low volume needs? If so, will the remaining powder remain viable as long as it is stored properly?

A: The full package must be used to make a working solution.

Q: 10. Is it truly odor free?Will it stain a typical bathroom sink?

A: While this product is odor-free, it should not be disposed down a sink as it would require disposal through a licensed facility. Please see the link for more information: http://bit.ly/32anR5i