Gold-Plated 4-Pin Female To Male Xlr Audio Cable 3.9'

Gold-plated 4-pin Female To Male Xlr Audio Cable 3.9'

Product Code: eq124655
Availability: In Stock

$40.80 $52.22

Qty

19 reviews Write a review

Description
Reviews (19)

This Gold-Plated 4-Pin Female to Male XLR Audio Cable 3.9'from Gold-Plated 4-Pin Female to Male XLR Audio Cable 3.9'connects any microphone to your audio recording device. Both the 4-pin female and 4-pin male XLR connectors are gold-plated for superior audio transmission quality. The cable measures 3.9' in total length.

Gold-Plated Connectors 4-Pin Female XLR Connector 4-Pin Male XLR Connector 3.9' Total Length

Parameters
Connector 1	1x 4-Pin XLR Female
Connector 2	1x 4-Pin XLR Male
LED Indicators	No
Cable Length	3.9' / 1.2 m
Packaging Info
Package Weight	0.2 lb
Box Dimensions (LxWxH)	9 x 5.5 x 0.5"

Related Questions and Answers

Q: 1. Does this work with the SE846's?

A: Yes, it does perfectly, also is a good color replacement for the default one.

Q: 2. How is this wired? Will it downmix stereo headphone output to mono XLR? Is right + tied to left +, and is ground tied to -?

A: If you are looking to connect from a headphone output, you would actually need an adapter like B&H # KORSMXM015 , which has a male XLR output. That would mix the stereo signal down to mono. For separate left and right audio, you would need a Y-cable like B&H # KOSMYCM2XM03 .

Q: 3. Will this cable connect my Deity Microphones V-Mic D3 Pro to Canon C70?

A: No, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable is not compatible for connection to the Canon EOS C70 Cinema Camera which has a 3.5mm input as well as two TA3 3-pin mini-XLR inputs. The Kopul XRSM Cable has a standard size female XLR connector and you would need a mini-XLR male connector to connect the mic to the camera's mini-XLR input. You can use the Kondor Blue Mini-XLR Male to 3.5mm Stereo Mini Cable -12" (B&H # KOTRS35FBM) to connect the Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone to the camera's mini-XLR input.

Q: 4. I own a Audio-Technica ATH-M50xSTS Analog version, I wanna connect it to my PC. Because the mic jac is XLR can I do this?

A: No, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable will not enable connection for the mic from the Audio-Technica ATH-M50xSTS StreamSet Headset with XLR and 3.5mm Connectors through the computer's 3.5mm input. The computer's input will not supply enough voltage to power the microphone. The best option for connection of the ATH-M50xSTS would be to use a USB audio interface with an XLR mic input that can supply phantom power.

Q: 5. Can I use this to my Dji Mic 2 and my Zoom H4N Pro?

A: No, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable will not connect the receiver output of the DJI Mic 2-Person Compact Digital Wireless Microphone System to the input of the Zoom H4n Pro 4-Input / 4-Track Portable Handy Recorder. The XLR connector on the XRSM has the wrong gender for this application. A recommended cable to perform this function is the Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male (BH #HOHMX003Y).

Q: 6. Will this cable work to convert rs232 9pin to 8pin from a projector?

A: If the wiring pin out is the same, in theory, yes it would but this cable is generally used for older music synths for Sysex and Midi data.

Q: 7. Does this send the same signal to both left and right inputs on the camera?

A: Yes. The Kopul XRSM-10B will send a signal from a 3-pin XLR to the left and right channels of a camera. Be mindful of the differences between line and mic, as a line signal will overload a mic input and cause distortion.

Q: 8. I'm looking for a transfer cable for a Sony A7C II camera. Is this EZQuest a good choice?

A: The EZQuest DuraGuard USB 2.0 Type-C Male Cable (3.9'), B&H # EZX48910, is only able to reach speeds of up to 480Mb/s which is not ideal since the Sony A7C II has a USB 3.0 port capable of reaching speeds of up to 5Gbps port. I would instead recommend looking at the EZQuest USB 3.1 Gen 2 Type-C Cable (3.3'), B&H # EZX40090, which won't slow down your transfers since it supports speeds of up to 10Gb/s.

Q: 9. What adapters would be required to use the Rode Video Mic Pro (stereo) with a Tascam DR-40 and not go to mono?

A: Why not just connect 2 XLR ports on the mic to the 2 XLR ports on the recorder using simple XLR-XLR cables? Am I missing something?

Q: 10. Can this be used with a Zoom H1 with XLR out of a speaker?

A: You can use this cable to connect the XLR mix out of a powered speaker to the line in of an H1n. Please note, the level coming out of the speaker could be much hotter than the H1n line in is expecting. You will want to watch your levels on the H1n to avoid peaking.

BRADMAN	25/09/2024
[0.2 lb] GREAT QUALITY AND JUST WHAT I WAS LOOKING FOR. 5

Doug	24/09/2024
[0.2 lb] I'm doing a series of round table discussions around the country with eight talent in each discussion session. Because i'm flying to each location, space and weight are at a premium so I'm using a Zoom F8 mixer, HOSA Little Brother 50-foot sub snake and eight dpa 4061 lavaliere microphones plus accessories and a slate. Everything has to fit in a carry in a small roller case and a small back pack so i don't have to check any bags. I'm using eight of the 10-foot Remote Audio cables to split off from the sub snake to feed the lavalieres. I carry a few-25 foot XLR cables as back up's if I need a little bit more reach. The 10-foot cables made all the difference in the world for space and weight constraints due to air travel. I've used Remote Audio cables for over a decade without a single cable failure. Remote Audio makes them tight and right. 5

Chau	11/09/2024
[0.2 lb] I have been used Mogami for few Aplications and I am very pleased 5

musicstudentforever	01/09/2024
[0.2 lb] Great buy!! Cable made in Japan, worth the price. 5

Jim	27/08/2024
[9 x 5.5 x 0.5"] So, honestly, I don't know if cables are really worth this kind of money. Good cables cost, but do they really cost this much? I'm not a manufacturer so I can't say. All I can say is that I wanted the best cables to minimize interference and signal loss and these fit the bill. I could have bought less expensive cables that caused disappointment and then I would be out that money, so I just went for the "best". Absolutely no disappointment and signals are very clean. I didn't needs the "stage" model, but I couldn't find the regular "Gold" in a 30-foot length. Now that I have Mogami cables connecting all of my equipment (and a wallet that has substantially less green), I have peace of mind. This brand is one that you will be very happy with if you can spend the money and not look back. Don't think about first costs or you'll cry but - later - you'll be glad that you used some of your 401k to get the best. 5

Barend B.	27/08/2024
[9 x 5.5 x 0.5"] B and H got me this cable quick, and on the shoot. I needed it for a boom pole and it worked perfect. The Cable ends are tight, not cheap stuff, made great like it should be. 5

Conrad	22/08/2024
[9 x 5.5 x 0.5"] works as advertized Very well made too. I would certainly buy this again. 5

Tom	16/08/2024
[0.2 lb] I don't normally write product reviews, especially for accessory items, but this one deserves a mention. I needed a long audio cable for field recording and there are few options in this length without resorting to extension cables. This cable is not cheap, but you get what you pay for. The build quality is very high - both the cable and the connectors are robustly constructed and will likely withstand many years of rugged field use. The velcro cable wrap is a nice feature - both to keep the cable organized when coiled and to attach it to a mic stand or boom pole when in use. All around a great product! 5

Bagavathikan	08/08/2024
[9 x 5.5 x 0.5"] Very good cable! Strong and reliable.. No problem so far. 5

Bux	06/08/2024
[9 x 5.5 x 0.5"] I used this for audio, to replace a lost stereo microphone cable. It is super robust and great quality construction. and much cheaper than buying one from the microphone manufacturer. 5