This Tentacle Timecode to 5-Pin LEMO Cable (15")allows you to output timecode from a Tentacle timecode generator and feed it into the 5-pin LEMO TC input of a compatible device.

This rugged cable is 15" in length and features a 3.0mm outer diameter. On one end, it is terminated with a right-angle, Neutrik NTP3RC 3.5mm TRS male connector for TC output from the Tentacle. On the other, it is terminated with a 5-pin LEMO male connector for TC input into a camera or recorder.

The LEMO connector features a green silicone boot and is compatible with Ambient Lockit products and other similar timecode gear, e.g. Deneke, Betso, and pro cameras.

TC Out of Tentacle to LEMO Device    Right-Angle Locking 3.5mm TRS Male    5-Pin LEMO-Compatible    Cable OD: 3.0mm    Green Silicone Boot on LEMO Connector    Length: 15"

Related Questions and Answers

Q: 1. Will this cable work for Sound Devices 633 to act as master and feed the TC-1?

A: No, the Deity Microphones C20 Right-Angle Locking 3.5mm TRS to Right-Angle 5-Pin LEMO Timecode Cable is compatible for feeding timecode from the Deity Microphones TC-1 Timecode Generator into the Sound Devices 633 Digital Recorder. The TC-1 would be used as the timecode generator.

Q: 2. Is it compatible with other types of timecode generator? Like the Atomos Ultrasync ONE?

A: The Tentacle Sync Timebar Multipurpose Timecode Display is only compatible via Bluetooth with Tentacle Sync products through the Tentacle Setup App, but you are able to Jam-Sync the device through the 3.5mm jack with other timecode generators such as the Atomos Ultrasync ONE.

Q: 3. Could this cable work with Sony A7IV and the Sony A7SIII? These cameras also have that same multi port.

A: The Tentacle Sync 3.5mm TRS to Multi Interface Timecode Cable for Sony FX3/FX30 (7.9") works with the ONY FX3, FX30 and SONY A7S3 and the A1. It does not work with the A7IV.

Q: 4. Is there any clamps or mounts? Eg to attach this to a wall?

A: There is an integrated hook surface for mounting the Tentacle Sync Timebar Multipurpose Timecode Display.

Q: 5. will this work for the red komodo-X ?

A: No, the Deity Microphones C14 Right-Angle Locking 3.5mm TRS to Straight 5-Pin LEMO Timecode Cable is not compatible for use with the RED KOMODO-X 6K Digital Cinema Camera. The KOMODO-X uses a 9-pin connector for timecode, so you can use the Deity Microphones C17 Right-Angle Locking 3.5mm TRS to Right-Angle 9-Pin LEMO Timecode Cable (B&H # DEDTS0308D61).

Q: 6. I’m using a mid49 breakout box on Komodo x, is this compatible for timecode?

A: The Deity Microphones C14 Right-Angle Locking 3.5mm TRS to Straight 5-Pin LEMO Timecode Cable for Various Devices is compatible with standard 5-pin LEMO timecode inputs. Specific compatibility for the Komodo X breakout box is not mentioned, but most devices with a 5-pin LEMO timecode input should be compatible.

Q: 7. Will this cable work with Z CAM E2F6 and Mixpre3 II ? If not can you point me to the right cable for time code.

A: The Deity Microphones C14 Right-Angle Locking 3.5mm TRS to Straight 5-Pin LEMO Timecode Cable for Various Devices is not the correct cable. You need a 3.5mm to BNC timecode cable like B&H # DEDTS0272D62.

Q: 8. Are there any mounting points or mounting options? 1/4 20 threads ?

A: No, there are no mounting points on the Tentacle Sync Timebar Multipurpose Timecode Display.

Q: 9. Does this cable and Tentacle Sync box need to be connected at all times to the camera?

A: If the camera supports Timecode Jam Syncing, you do not need to keep the Tentacle Sync plugged in the entire time.

Q: 10. Is this compatible with other rigs like tilta or just made to only interface with small rig?

A: Yes, the Tentacle Sync MAD Clamp Bracket by SmallRig for Sync E TimeCode Device can be used with a rig made by any manufacturer, not specifically those that are made by SmallRig.