House your components in the sleek and stylish Lian Li LANCOOL 216 RGB Mid-Tower Case. Constructed from durable steel and featuring a transparent tempered glass side panel as well as a mesh front panel, custom builders can turn their next build into the centerpiece of their gaming room or office.

Designed to enhance your system's core foundation, the LANCOOL 216 supports Micro-ATX, Mini-ITX, ATX, and E-ATX motherboards, allowing you to pick the ideal motherboard of your choosing. Four 2.5" drive bays are split evenly between the PSU shroud and behind the motherboard while the drive cage supports two 2.5" or 3.5" solid-state and hard-disk drives. Seven expansion slots allow you to easily install a wide range of utility and graphics cards up to 15.4" long. Two 160mm ARGB fans are pre-installed on the front panel to provide ample cooling and offer vast illumination options and custom effects to make your system feel unique. The LANCOOL 216 also supports both liquid and air cooling capabilities, supporting radiators up to 360mm and CPU coolers up to 7.1" tall. Front I/O panel offers two USB-A 3.0 ports, a single USB-C port, as well as a 3.5mm combo audio jack for private enjoyment of your media and games.

Micro-ATX, Mini-ITX, ATX, E-ATX    Steel Frame & Tempered Glass Side Panel    4 x 2.5" Drive Bays    2 x 2.5/3.5" Combo Drive Bays    7 x Expansion Slots    2 x USB-A 3.0 | 1 x USB-C    2 x 160mm ARGB Fans    Supports GPUs up to 15.4" Long    Supports CPU Coolers up to 7.1" Tall    Liquid Cooling Supported

Providing adequate airflow to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud's side. The front mesh extends to the top for a continuous mesh panel.

The included 160mm ARGB fans feature two channels of LEDs that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3-pin header. Located in the second chamber behind the motherboard, a SATA-powered fan hub can support up to 4x ARGB and PWM fans.

The modular motherboard I/O allows users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems. Set higher, the motherboard leaves room above the PSU shroud for wider fans. When set lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling.

Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel.

Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360mm radiator or 3x 120mm fans at the top.

The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.

The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system.

The LANCOOL 216 offers multiple options for easy cable management. Along the cable grommet bar, three large cable management straps can hold two different sets of cables. Three small clips are located along the rear side panel, ideal for cleanly routing CPU cables. Two additional cable management straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber.

Related Questions and Answers

Q: 1. Does the SLIN140-1W fit for exhaust? I know the SL140 v1 fits, but SL140 v2 doesn't unless you remove one of the fan's side panels

A: The Lian Li SLIN140-1W is a 140mm PWM fan, which the Lian Li LANCOOL 216 RGB Mid-Tower Case does have a slot for. However, Lian Li has not provided explicit specs on which cases the fan is or is not compatible with, so this measurement would be the best information available.

Q: 2. DVD-RW Bays?

A: The Lian Li LANCOOL II Mesh Performance Mid-Tower Case (Black) BH #LILAN2MPX does not support optical drives, there are no 5.25'' bays or a door on the front.

Q: 3. Is the glass clear or does it have a black tint to it?

A: The Lian Li O11 Dynamic Mid-Tower Case has a slight tint.

Q: 4. Will this case hold a 280 mm radiator on front ? or on top? or in both?

A: The Lian Li LANCOOL II Mesh Performance Mid-Tower Case (Black) BH #LILAN2MPX can hold the following radiator configuration: Front (multi-way fan/radiator bracket): 1 x 360/280/240mm Top: 1 x 240mm (aligned to the left)

Q: 5. is there options for a fan hub?

A: Yes, you can install a fan hub inside the Lian Li LANCOOL II Mesh RGB Mid-Tower Case (Black) BH #LILAN2MRX.

Q: 6. Can the RGB lights on the fans be turned off leaving just the fans running? Building for wife who's sensitive to some lighting.

A: Yes, the RGB fans on the Lian Li LANCOOL II Mesh RGB Mid-Tower Case (White) BH #LILAN2MRW can be turned off.

Q: 7. can it accept a 3x120 (360) MM AIO cooler without 1 fan being blocked by something?

A: It seems like it should fit fine without blocking anything with proper wire management.

Q: 8. Dimensions?

A: These are the dimensions for the Lian Li O11 Dynamic Mid-Tower Case (White) BH #LIPCO11DW. Dimensions (W x H x D) 10.71 x 17.56 x 17.52" / 272 x 446 x 445 mm

Q: 9. What do I need in conjunction to the case to side mount my GPU? Or can I do this right out the box?

A: You will need a vertical GPU holder. It is sold separately.

Q: 10. Does it have rgb fans included with case

A: This particular case is the Lian Li LANCOOL II Mesh Performance Case which does not come with the RGB fans. The Lian LI LANCOOL II Mesh RGB Case that comes with the RGB fans is here https://www.bhphotovideo.com/c/product/1577101-REG/lian_li_lan2mrx_lancool_ii_mesh_rgb.html