This Velbon EX-330Q Tripod with Pan-and-Tilt Headsupports up to 4.4 lb, measures 19.9" when folded, and includes a quick release plate. Its 3-section legs each feature flip locks for fast deployment, and can be positioned for a minimum height of 19.7" to a maximum height of 45.3", or 57.5" with its push-and-pull, rapid center column fully raised. An integrated center brace allows the legs to be spread simultaneously as well as uniformly, and helps to hold them in place. A rubber foot is included on the bottom of each leg, further enhancing stability on a wide variety of surfaces.

Cameras, sport optics, or camcorders that are compatible with a 1/4"-20 mount can be connected to the quick release plate, which is secured to the tripod's pan-and-tilt head using a quick release cam lock. The head can be rotated 360°, tilted 60° backwards, 90° forwards, or 90° sideways for portrait orientation. Both the 360° rotation as well as the backward or forward tilt movements function simultaneously and can be set in place using the pan bar's integrated twist lock. When changing from a landscape to portrait orientation, the sideways tilt can be independently adjusted and secured.

A carry bag with a strap is provided for storage and transport.

Load Capacity: 4.4 lb    Maximum Height: 57.5"    Minimum Height: 19.7"    Folded Length: 19.9"    Leg Sections: 3, Weight: 1.9 lb    Aluminum-Alloy Legs, Flip Locks    Rapid Center Column, Center Brace    3-Way, Pan-and-Tilt Head    Quick Release Plate, 1/4"-20 Mount    Rubber Feet, Tripod Bag

• Supports up to 4.4 lb
• Push-and-pull center column center column for rapid positioning
• Can be set for a minimum height of 19.7" to a maximum height of 45.3", or 57.5" with column fully raised
• Legs each feature 3 sections, flip locks for fast deployment
• Center brace allows legs to be spread simultaneously as well as uniformly and provides additional support
• Rubber feet for stability
• Three-way, pan-and-tilt head can be rotated 360°, and tilted 60° backwards, 90° forwards, as well as 90° sideways for portrait orientation
• Head rotation, as well as backwards-and-forwards-tilt movements function simultaneously
• When changing from a landscape to portrait orientation, the sideways tilt can be independently adjusted and secured
• Weighs 1.9 lb, measures 19.9" when folded

• Aluminum-alloy legs and three-way, pan-and-tilt head
• Quick release plate with 1/4"-20 mount and rubberized, anti-slip surface
• Includes carry bag for storage and transport

Related Questions and Answers

Q: 1. Would this tripod hold a Canon T5i with a Tamron 60mm macro lens, aiming straight down, without toppling over?

A: The Valbon EX-Mini has a load capacity of 3.3 pounds, which will support a Canon T5i and Tamron 60mm macro lens.

Q: 2. when it is in the lowest position at 8 what is messurement of the area the legs cover?

A: I'm afraid Velbon does not list the exact specs for how much area the legs will cover when this tripod is only 8 inches from the ground. However we can tell you that it will take up a very small amount of room when configured like that.

Q: 3. Does this tripod have rubber feet? I'm trying to find something that would not slide on a smooth surface.

A: Yes. The feet on the EX-Mini (at the time that I bought mine) are rubberized. There may be surfaces on which they would still slide, but I tried it on wood, plastic and glass without slipping.Hope this helps.

Q: 4. Will this tripod accommodate the Canon 90D? Thank you!

A: The Slik U8000 Tripod is rated to support up to 4.4 pounds and most lens and Canon 90D combinations will be less than 4 pounds. However, length is a factor in tripod balance too. A longer 70-300 lens might not balance to well with this tripod. This Magnus would be a better option since it is rated to support up to 11 pounds: https://bhpho.to/2UHo8dr

Q: 5. Is this Ball Head: Velbon QHD-63Q Ball Head with Quick-Release Plate the right accessory for this tripod? Regards

A: Yes, the Velbon QHD-63Q Ball Head with Quick-Release Plate could also be used.

Q: 6. Can we use it for phone

A: Yes, but the following cradle is needed in order to mount mobile devices. Oben ASPTA-20 Smartphone Tripod Adapter BH #OBASPTA20 • MFR #ASPTA-20 https://bhpho.to/3pcxLDz

Q: 7. Would this support a Nikon D750 with 24-120mm lens?

A: I'm not an expert, but I'm guessing it would. It's very sturdy, and I use mine with a similar sized camera, out in the woods, at all kinds of odd angles. So far the camera has not shifted position once.

Q: 8. Is the tripod plate on this head by chance compatible with the RH25D or RH45D Libec Heads? Or Vice Versa?

A: There are no reports of that being possible. Hopefully, someone has these two heads and can test them.

Q: 9. It's possible to buy a ball head for this model of tripod ? Regards

A: A ball head such as the Slik SBH-120 DQ Compact Ballhead 120 with Quick Release - Supports 4.5 lbs (2kg) B&H # SLBH120DQ can fit the 1/4 thread on the base of this tripod.

Q: 10. Will this support a Nikon D610 w/Nikon Nikkor 28-300 lens hands free?

A: I am not sure why do you want to use this tripod with that system, I under stood that this tripod is for mainly for macro photo or table-top photo, I'd rather go regular size tripod if I use your lens, How about check your gear weight and tripod spec?