Keep your power-hungry equipment running with the BlockBattery LOGOS-150i 4-Battery Kit with Quad Chargerfrom BlockBattery. This V-mount lithium-ion battery supports a capacity of 150Wh and features a 12A constant current capability. It is designed to power 14.4V cameras, light fixtures, and other professional gear.

The LOGOS-150i comes equipped with a multi-mode color OLED display with charge and discharge modes that show energy level, voltage, charge/discharge current, runtime, and charge cycles, and there is a button to turn the display on and off. It also features a 4-step LED status gauge to show the remaining battery life.

Two D-Tap outputs on top allow you to power additional accessories, and they can also be used to charge the battery using a BlockBattery D-Tap charger. The battery can be charged using LOGOS quad chargers. It takes approximately 3.5 hours to charge the battery from empty using a single-channel charger, and approximately 4 hours from empty using a quad charger.

4 x LOGOS-150i 14.4V 150Wh Batteries    LOGOS Quad V-Mount Battery Charger    14.4V 150Wh, 12A Continuous Draw    Simultaneous Fast Charging

V-mount 150Wh capacity lithium-ion battery with 12A continuous draw

Provides 14.4V output voltage to your gear

Four-stage status LED gauge shows remaining battery life

OLED display with charge and discharge modes and on/off display button

Charge mode shows charging percent complete, charge voltage, charge current, and the total number of charge cycles

Discharge mode shows percentage left, discharge voltage, discharge current, and runtime remaining in hours/minutes

Two D-Tap outputs that can also be charged with a single-channel BlockBattery D-Tap charger in approximately 3.5 hours from empty

Charged with BlockBattery LOGOS Quad fast chargers in approximately 4 hours from empty

The battery can be stored for up to one week on a charger and requires removal from the charger and recharging if stored over one week

Related Questions and Answers

Q: 1. What's the proper storage level for these? 30% charge? 50% charge? 100%?

A: the recommended storage level for most lithium V mount batteries is 20%-30%

Q: 2. Can I use the "Core SWX PB70C15 D-Tap Wall Charger" to charge this battery?

A: Yes you can. BH #COPB70C15 will work to charge this battery. https://bhpho.to/3bpbCpq

Q: 3. went to use my 98wh battery from this kit and the screen lit up but was blank. also the red light on the bottom of my unit turned on. what does this mean? can't get the percentage, etc to display. doesnt seem functional

A: Please contact our live chat support team so that we can advise what steps to take next.

Q: 4. Does it communicate battery info to a Red camera?

A: Manufacturer states that it will communicate battery info when using advanced d-tap output.

Q: 5. will this work with idx battery?

A: This charger would be able to work with IDX batteries up to 16V like https://bhpho.to/3jLGBTt

Q: 6. Will this power the Godox Vl150 at full power continuously?

A: Yes, there should be no issue.

Q: 7. Anyone flown with these batteries?

A: Lithium batteries with more than 100 watt hours may be allowed in carry-on bags with airline approval. One spare battery, not exceeding 300 watt hours, or two spare batteries, not exceeding 160 watt hours each, are permitted in carry-on bags. For more information, see the FAA regulations on batteries.

Q: 8. How long does it take to fully recharge a 98Wh Battery? Can it charge both batteries at the same time?

A: The Core SWX GPM-X2S can charge a single battery at a 3A rate or two batteries simultaneously at 1.5A. One 98wh pack can charge in under 2.5hrs.

Q: 9. Can i power my bmpcc 6k and my 7" bm video assist 12hdr monitor?

A: Both of them can be powered using this battery, but not simultaneously as there is only one D-Tap output on the battery.

Q: 10. How long does it take to charge batteries doesn’t mention that inspects. Especially equivalent to other chargers?

A: unfortunately this information is currently NOT available from the manufacturer