The symmetrical transducer design of the Sennheiser MKH 30-P48 Bidirectional Microphoneproduces an unusually wide and smooth frequency response.

Particularly suited to soloists and small instrumental groups, the MKH-30-P48 can also serve as an "S" or side microphone in MS stereo applications. As a general support microphone, it is particularly useful in the effective suppression of sounds from adjacent sound sources. Its transformerless output has inherently low noise and distortion, and it also features switchable roll-off filtering and pre-attenuation. The MKH-30 uses 48V phantom power and is finished in a black anodized metal casing.  A MZS 80 shockmount and a MZW 41 windscreen are included.

Figure 8 Pickup Pattern    Wide, Smooth Frequency Response    For Soloists & Small Groups    Switchable Roll-Off Filter    Pre-Attenuation Switch    Uses 48V Phantom Power

Bidirectional condenser microphone

Particularly suited to soloists, small instrumental groups, or as an "S" side mic in MS stereo applications

High rejection of lateral sounds

Exceptionally low inherent self-noise

Symmetrical transducer technology ensures extremely low distortion

Transformerless and fully floating balanced output

Switchable roll-off filter to compensate for proximity effects at a distance of approximately 20"

Switchable pre-attenuation

Black, anodized light metal casing

Related Questions and Answers

Q: 1. Looking to store an mkh8050 and 2x mkh50s in a run bag (using this one: BH #POCSDV4U ). I leave the Rycote INV mk3 shockmounts on the mics for convenience, as well as the foam windscreens (bubblebee spacer BH #BUBBISBXS & rycote super softie BH #RYWSQAT) for additional protection. am currently putting the mics in these porta brace zipper bags (BH #POCSB93 ) to separate them within the run bag, but wanted to see if there's anything slightly larger (to fit w/ the foam windscreens, not just the rycote shockmounts) & slightly more robust in terms of protection?

A: Perhaps you can use something like the OP/TECH USA Lens/Filter Pouch, Large (B&H # OPPLFL) which is 9" high and has a 4.5" diameter, or the Ruggard Fold-Over Neoprene Lens Pouch - 3.5 x 6", Black (B&H # RULPNF35X60) or the Tenba Soft Neoprene Lens Pouch - Black, 9 x 4.8" (B&H # TETSLP948B). The Tenba Soft Molded EVA Lens Capsule with Extra Padding - Black, 9 x 4.8" (B&H # TE636359) has a more structured design for added protection. Even though these items are intended for use with camera lenses, they certainly can be used to protect the Sennheiser MKH 8050 Compact Supercardioid Condenser Microphone together with the windscreens and perhaps with the shockmount too.

Q: 2. What will provide some protection for the mic from damage (only need for use indoors) better than the foam windscreen?

A: The only accessories made to actually mitigate damage to the MKH 50 P48 Microphone would be a case for safe storage and transport. In general, wind protection such as foam is not meant to protect against damage, only excessive wind noise and should not be misconstrued for physical protection. While it's true the foam can provide some slight protection against shock, you should still treat the microphone with the same level of care as you would with out any wind protection.

Q: 3. What is needed for this to work with a Tascam DR-100mkIII, just an XLR cord?

A: Yes. All you would need is an XLR cable,

Q: 4. How does this mike in comparison for MKH50 for voice over or dialog? Any audio samples would be great

A: Yes the Sennheiser MKH 8050 is very ideal for voice and dialog recording.

Q: 5. is there a recommended pistol grip for shooting situations where a boompole is not feasible? for the mkh50

A: The Auray Universal Microphone Pistol Grip (BH #AUGRIP) is a recommended handheld pistol grip for adapting to the shock mount and microphone in the Sennheiser MKH 50 Supercardioid Microphone Kit.

Q: 6. Is it good for ME67 with K6?

A: The Sennheiser CASELONGMKH is designed for the Sennheiser MKH-416/MKH-60 and will not work with the ME67/K6. As an alternative, you may consider the Alfa Case MFR# 20018MTLB.

Q: 7. What is the best windshield (dead cat) that will fit?

A: Since the Sennheiser MKH 8050 Microphone is only 2.9" long with a 19mm diameter, you can use the Bubblebee Industries "The Spacer" Bubble Windshield & Fur Cover System for Small-Diaphragm Mics - Black, Extra-Small (B&H # BUBBISBXS) or the Rycote Baseball Felt-Covered Windscreen - Black, 19/20mm, Single (B&H # RY039701). Both items will fit properly and will provide sufficient protection from wind noise. If you need a replacement for the foam windscreen that comes included with the mic, you can order the Sennheiser MZW-8000 Windscreen for MKH8000 Series Microphones (B&H # SEMZW8000).

Q: 8. Would the pattern on this mic work for 2-3 person interviews? mic on a boom overhead.

A: If the 2-3 persons are sitting close to each other, then yes you can use the Sennheiser MKH50 for capturing up to 3 people talking.u

Q: 9. Does this kit also include the sennheiser native shockmount, and foam windscreen that usually comes in the case with the mkh50?

A: Yes, it has the boxed Sennheiser kit with the screen and a mic clip. The latter is the close-fitting clip with the standard 5/8 thread.

Q: 10. Which shockmount would be perfect for It?

A: Here's a quality Rycote shock mount suggestion for the MKH8050 BH #RYINVHGMKIII.