The 150x150mm UV/IR Cut Filter for Ice Imagingis an ultraviolet and infrared control filter that is useful for digital cinematography and still photography. While recording video with a CCD or CMOS camera, multi-stop neutral density filters are used to maintain proper exposure by compensating for increased light levels when widening the camera lens' iris to obtain a narrower depth of field. As the increased amount of light passes through multi-stop neutral density filtration, visible light is progressively blocked, while infrared light is allowed to pass through. As the proportion of infrared light that reaches the camera sensor becomes greater, the results can show unwanted color shifts, particularly in dark areas of the frame, such as shadows where the appearance of black is dominant.

When the Ice 150 x 150mm UV/IR Cut Filter is applied, ultraviolet light waves and infrared light waves are suppressed, helping to ensure that light falling on a camera sensor is limited to the visible spectrum. When used along with multi-stop neutral density filters, potential infrared color shifts are prevented or minimized, preserving color accuracy throughout the frame. This filter may also be used to help ensure that the appearance of unwanted blue casts is reduced while recording video or still photos under daylight that also features intense ultraviolet light.

This filter cuts UV rays below 390nm and above 750nm, providing 99.4% light transmission between 400-700nm. The front surfaces of the filter include seventy layers of interference coatings, which limit the light that falls on a digital camera sensor to the visible spectrum. This filter is constructed from optical glass for clarity and color fidelity. This 150x150mm filter is 2mm thick and fits filter holders, including the Haida Haida M15, Kase K150P, LEE SW150, and more.

UV and Infrared Control Filter    For Digital Cinematography, Still Photos    99.4% Transmission Between 400-700nm    1x Filter Factor, No Exposure Change    Reduces Bluish Cast of Daylight    Use with Multi-Stop ND Filters    Prevents Infrared Light Pollution    Maintains Appearance of Dark Areas    2mm Thick Filter Fits Most Holders    Plastic Case

Filters out UV rays below 390nm and above 750nm

Provides 99.4% light transmission between 400-700nm

Suppresses ultraviolet light waves, reducing the bluish cast of daylight when recording video or still photos.

Useful with CCD or CMOS sensors to filter out infrared light pollution that causes color shifts frequently associated with high-definition recording with multi-stop neutral density filters.

Does not require exposure adjustment while in use.

Seventy layers of interference coatings on the front surface limit light that falls on a digital camera sensor to the visible spectrum.

Constructed from optical glass for clarity and color fidelity.

Plastic case included for storage and transport.

This 150 x 150mm filter is 2mm thick and fits most 150mm filter holders.

Related Questions and Answers

Q: 1. Can I use this filter (E43 Multi-Coated) on the Leica X (type 113)? Thanks.

A: If the X is a filter thread E43 than yes. I use it on an X-Vario. I love it. I am a firm beliver of using filters from the manufacturer of the lens.

Q: 2. HI! Would this be compatible with Voigtlander Color-Skopar 35mm f/2.5 P II Lens (M-Mount) ? I was told there is a selection of filters that won't be compatible, even if they are 39mm... Thanks!

A: The Tiffen 39mm UV Protector Filter BH #TIUVP39 is compatible with Voigtlander Color-Skopar 35mm f/2.5 P II Lens (M-Mount) BH #VO3525M.

Q: 3. Will this fit on my Panasonic dvx200?

A: As the Panasonic AG-DVX200 4K Camcorder has 72mm filter threads, yes, the Tiffen 72mm UV Protector Filter would be compatible for use on the Panasonic AG-DVX200 4K Camcorder.

Q: 4. Do this product fits with a Canon 70-200 mm f/2.8L USM lens?If not what size should I choose?

A: Canon specifies a 77mm Filter Thread Diameter - so this Tiffen filter will fit.

Q: 5. With the wide angle version, can you still put your lens cap on while this filter is on the lens, or would you have to take it off to apply the lens cap?

A: You may be able to use it with a lens cap but it's entirely dependent on how the lens cap is designed and how it attaches.

Q: 6. Does the Tiffen 62UVP affect the color and/or current Picture Profile settings?

A: No, it does not. The Tiffen 62mm UV Protector Filter, B&H # TIUVP62, only has an affect on ultraviolet (UV) light. It is a clear filter that has no affect to the image. As indicated under the Specs tab on our website, the filter has a 1 (+0-Stop) filter factor, so it has no affect to the image and does not affect Picture Profile settings.

Q: 7. Will this fit on the Sony 16-50mm f/3.5-5.6 OSS Alpha E-mount?

A: Yes, this filter fits the Sony 16-50mm lens.

Q: 8. Does this filter have a thread pitch of .5mm or .75mm? In other words, will it fit on a black chrome edition 50mm Summilux-M which takes only .75 mm thread pitch filters?

A: This filter will fit the 50mm Summilux.

Q: 9. does this fit nikon af-s nikkor 200-500mm f/5.6e ed vr lens?

A: The Nikon 200-500mm lens uses 85mm filters so you would need this one instead: https://bhpho.to/3YppSIB

Q: 10. Will this fit on the Sigma 150-600mm sport lens?

A: Yes. I bought it for that same lens.